Designed to achieve one hundred percent Anhui carbide slag

Carbide slag is calcium carbide acetylene production process waste calcium carbide hydrolysis reaction, not only piling up long-term occupation of land, but also pollute the environment, currently more mature treatment process is the use of carbide slag cement, but carbide slag is a strong base, the more reactive low, most of the domestic enterprises are part of the use of carbide slag instead of limestone. Recently we learned that cement plant in Anhui Designed by trial and error six months, to carry out a large number of basic experiments, as well as the implementation of a number of technological transformation measures, she finally achieved a hundred percent carbide slag cement. Since June 2013 Anhui HuaSu cement plant feed production so far, in ensuring the quality of clinker and kiln condition is stable, with the proportion of limestone gradually reduced from 20% to 15%, 10%, 5%, and finally reduced to 0 . Until January 14, 2014, along with a limestone cement quality control division ratio of 0% in the hands of the notice issued to the operator control, HuaSu cement taken a hundred percent use of alternative calcium carbide slag clinker raw materials to produce solid step, although kiln during operating conditions fluctuate, firing difficult, but held a special cement plant tissue analysis will be positive, investigate and reason, arrange 24-hour tracking kiln system conditions, when the problems one by one after the break, the kiln condition is stable, clinker quality is completely better than national standards, currently clinker kiln system Nissan stable at more than 2400T. Carbide slag instead of limestone hundred percent clinker production, cement plant is completed in 2014 HuaSu the mission objectives had a good innings.