Calciumstearate

Melting point: 147-149 ° C

Density: 1.08 g/cm3

Storage conditions: Storeat+5°Cto+30°C.

Solubility: Soluble in hot pyridine, slightly Soluble in oil, but insoluble in alcohol and Mr.

Appearance: Powder

Color: white,

Odor: Fattyacidodor

PH: 7-9 (2.2 mg/l, H2O, 20 ° C)

Water solubility: insolubleH2O, Mr, chloroform; Slightlysolublehotmineraloils [MER06]

Merck: 14170 3

BRN: 3919698

InChIKey: CJZGTCYPCWQAJB - UHFFFAOYSA - L

CAS database: 1592-23-0(CASDataBaseReference)

EPA chemical information: Calciumstearate(1592-23-0)

Chemically white fine powder. Insoluble in water, slightly soluble in hot ethanol.

USES: used as non-toxic stabilizer for PVC plastics, lubricant, mould release agent and water-proofing agent for textiles

Usage: used as lubricant for coating paper and paint

USES: used as inner lubricant and non-toxic stabilizer for PVC, used as anti-knot agent for mold release agent in casting industry; Binder; Emulsifier; Lubricant; Remover. Stabilizing agent; Thickener; Flavouring agent.

USES: used as stabilizer and lubricant of PVC, can be used as non-toxic food packaging, medical equipment and other soft film utensils. As a halogen absorbent in polyethylene and polypropylene, it can eliminate the residual catalyst in the resin to the color of the resin and the lubricant of the molding products, and it can also be used as the mold release agent of the thermosetting plastics such as phenolic formaldehyde and amino acid, the lubricant of polyester reinforced plastics, the thickening agent of lubricating grease, the water-proofing agent of textiles and the flat agent of paint, etc. Food grade calcium stearate is used as an anticoagulant to prevent the aggregation and agglomeration of powdered or crystalline food and to maintain its free flow. However, according to the regulations of FAO/WHO, calcium stearate can be used for coating with glucose powder, sucrose powder and soup block, and the maximum allowable dosage is 15g/kg. Use as waterproof agent, lubricant and plastic assistant. Widely used in food, medicine, cosmetics, plastic rubber and other industries, mainly as lubricants, emulsifiers, stabilizers, mold release agents, promoters, cosmetics, etc. The coagulation rate can be increased in hard plastic products. Also can be used for food packaging, medical equipment and other non-toxic soft film, at the same time has the effect of stabilizer, long-term stability is better. In polyethylene, PVC stabilizer and lubricant, in polyethylene and polypropylene as a halogen absorbent can eliminate the residual catalyst in the resin on the color and stability of the resin. Widely used abroad to improve the heat resistance of plastics, improve the initial colouring and air permeability of weather resistance, will replace the toxic stabilizer with the same performance.