Product
Supplier
Encyclopedia
Inquiry
Home > Catalyst and Auxiliary > Polymer > Poly(acrylic acid) for Sale > High-quality manufacturer of serum separation gel choose Desheng
High-quality manufacturer of serum separation gel choose Desheng buy - large image1
High-quality manufacturer of serum separation gel choose Desheng buy - image1

High-quality manufacturer of serum separation gel choose Desheng

12 Inquiries

Unit Price: Get Latest Price
CAS No.:

9003-01-4

Grade:

Reagent Grade

Port:

SHANGHAI

Packaging:

25kg/HDPE Drum

Price valid (until):

2021-01-01

Company Type:
Manufactory
Location:
China
Qualification:
Main Products:

luminescent substrates,buffers,in vitro diagnostic reagents,Blood collection tube additives

  • Product Description

  • Seller Information

  • Inquiry History

  • Description

    Serum separation gel is mainly composed of silicone rubber, macromolecular hydrocarbons, hydrophobic glue, etc. As a high molecular polymer, it is insoluble in water and inert. It is a thixotropic viscous liquid with a density of 1.04-1.05 mmol /L, it has the advantages of oxidation resistance, high temperature resistance, low temperature resistance, and good air tightness.

    The reason why the serum separation gel can separate serum and blood cells is because the serum density is 1.026-1.031 mmol/L, and the blood cell density is 1.090-1.095. Due to specific gravity, the separation gel is just between the serum and blood cells, so under normal circumstances After the blood is centrifuged, there will be three layers of serum, separating gel, and blood cells in sequence. 

    There are generally two types of separation gel blood collection tubes commonly used in laboratories: serum separation gel coagulation tube and plasma separation gel anticoagulation tube. The serum separating gel coagulation tube is to add a coagulant to the blood collection tube to shorten the blood coagulation time, get the serum quickly, and report the result in the shortest time. The glass blood collection tube does not need to add a coagulant, and blood contact with the glass tube wall will trigger blood coagulation. When the blood coagulation factors Ⅺ and Ⅻ come into contact with plastic blood collection tubes, their ability to be activated is very weak, and a coagulant must be added to shorten the clotting time. The plasma separator gel anticoagulant tube is sprayed with anticoagulant such as lithium heparin on the inner wall of the separator gel blood collection tube to meet the needs of rapid plasma biochemical emergency testing.

    At present, serum separation gel blood collection tubes have been widely used in clinical laboratories. The separation gel can form an isolation layer between cell components and serum (plasma), effectively prevent the exchange of substances between blood cells and serum (plasma), and guarantee serum within a certain period of time The stability of (plasma) components. In the clinical application of separation gel blood collection tubes, many irregular operations will affect the separation effect, and some separation gel blood collection tubes interfere with some test items. These problems are not easy to be found in daily quality control and routine testing. In order to ensure the authenticity and credibility of the test results, it is very important to do a good job of quality control of blood samples before testing.

    Desheng is a high-quality manufacturer specializing in the production of serum separation gels. In addition to working hard to improve the quality, it is also committed to providing laboratory personnel with a set of clinical blood sample solutions, that is, operations during blood collection tube transportation, storage, blood collection, and centrifugation. Standards, etc., truly achieve first-class quality and service.

    Basic Info
    Product Name:

    Poly(acrylic acid)

    Other Name:

    2-Propenoic acid,homopolymer;Acrylic acid,polymers;Acrysol A 1;Acrysol A 3;Acrylic acid polymer;Nalfloc 636;Acrylic acid resin;OLD 01;XPA;Aron A 10H;Acrysol AC 5;Versicol E 15;Dispex C 40;R 968;WS 24;Good-rite WS 801;PA 11M;Revacryl A 191;Good-rite K 702;Junlon 110;Versicol S 25;Good-rite K 37;P 11H;WS 801;PAA 25;Viscon 103;Synthemul 90-588;Acrysol A 5;Acrylic acid homopolymer;Carboset 515;Sopronyl;Junlon 10L;Solidokoll N;NeoCryl BT 8;Good-rite K 752;Lyoprint TFA;Lyoprint TFB;Good-rite K 700;Kayacryl H 32;PK 24;Euderm Grund 25A;Acrysol LMW 20X;Good-rite K-XP 10;Good-rite K-XP 18;Good-rite K 722;Good-rite K-XP 11;Colloids 119/50;OLD 01V;Primal A 1;Rhoplex A 1;Syntergent JF;Jurymer AC 10L;Jurymer AC 10LP;Jurymer AC 10SH;Jurymer AC 10P;Jurymer AC 10H;TB 1131;PDS 76;K-Sorb;Aron 104;Deoxylyte DY-A;Poly(2-propenoic acid);Carboxypolymethylene;Three Bond 1131;Jurymer AC 106;AS 7503;Poly(acrylic acid);Jurymer AC 10;Turfine P 20;Arasorb S 100F;Arasorb 750;Junlon PW 110;A 10LL;PK 24 (polymer);RH-E;Plex 5377L;Plex 4783L;Acrytex W 240;Jurymer AC 10HP;Hiprint DA;F 443;Polysol F 443;Aquafeed 600;AQ 3930;Jurymer AC 10CSH;PAA 45;Lucidene 400;NSC 7706:2;Acumer 1530;Carbopol ISX 1794;Prisulon CR-F 60;Colloid 209;Acusol 445;Lyoprint TFC;PA 12;PA 41;PA 280;AW 36;Jurymer AC 10LHP;PA 12 (polyacrylic acid);Acryl AG 1000;Acryl AG 1100;Acryl AG 1200;Marwit K 1;SER 1004;Aron 10H;Aqualic HL 580;11132-69-7;37241-23-9;39341-22-5;51142-25-7;54578-44-8;54990-82-8;55492-72-3;56747-65-0;59233-19-1;65742-16-7;71767-27-6;71767-28-7;81031-52-9;82446-45-5;82446-46-6;87913-02-8;88650-89-9;101360-15-0;104625-85-6;104922-39-6;105913-47-1;118168-84-6;125857-68-3;125857-69-4;131094-47-8;165724-08-3;168564-56-5;169799-28-4;170473-89-9;174594-09-3;223508-97-2;230287-43-1;471251-42-0;597551-81-0;746620-96-2;746620-98-4;925683-30-3;1243262-39-6;1422717-48-3;1454600-56-6;1621008-43-2;1621388-50-8

    CAS No.:

    9003-01-4

    UN No.:

    3265

    Molecular Formula:

    (C3H4O2)x

    InChIKeys:

    InChIKey=NIXOWILDQLNWCW-UHFFFAOYSA-N

    Molecular Weight:

    72.06270

    Exact Mass:

    72.02110

    EC Number:

    618-347-7

    HScode:

    3906909090

    Categories:

    Polymer

    Characteristics
    PSA:

    37.30000

    XLogP3:

    0.25700

    Appearance:

    Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.

    Density:

    1.270 g/cm3

    Melting Point:

    95 °C

    Boiling Point:

    116ºC

    Flash Point:

    61.6ºC

    Refractive Index:

    n20/D 1.442

    Water Solubility:

    Soluble in water.

    Storage Conditions:

    Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

    Vapor Pressure:

    3 mmHg

    Vapor Density:

    Relative vapour density (air = 1): 2.5

    Toxicity:

    LD50 oral in rat: 2500mg/kg

    Flammability characteristics:

    Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.

    Explosive limit:

    Explosive limits , vol% in air: 3.9-19.8

    Odor:

    Acrid odor and fumes

    PH:

    pH = 3 (approximately)

    PKA:

    4.26(at 25 °C)

    Hazard Identification

    Classification of the substance or mixture

    Acute toxicity - Category 4, Oral

    Serious eye damage, Category 1

    Specific target organ toxicity – single exposure, Category 3

    Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1

    Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2

    GHS label elements, including precautionary statements

    Pictogram(s)
    Signal word

    Danger

    Hazard statement(s)

    H302 Harmful if swallowed

    H318 Causes serious eye damage

    H335 May cause respiratory irritation

    H400 Very toxic to aquatic life

    H411 Toxic to aquatic life with long lasting effects

    Precautionary statement(s)
    Prevention

    P264 Wash ... thoroughly after handling.

    P270 Do not eat, drink or smoke when using this product.

    P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...

    P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

    P271 Use only outdoors or in a well-ventilated area.

    P273 Avoid release to the environment.

    Response

    P301+P317 IF SWALLOWED: Get medical help.

    P330 Rinse mouth.

    P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

    P317 Get medical help.

    P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

    P319 Get medical help if you feel unwell.

    P391 Collect spillage.

    Storage

    P403+P233 Store in a well-ventilated place. Keep container tightly closed.

    P405 Store locked up.

    Disposal

    P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

    Other hazards which do not result in classification

    no data available

    Handling and Storage

    Precautions for safe handling

    Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

    Conditions for safe storage, including any incompatibilities

    Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.

  • Seller Information
    Business Type:

    Manufactory

    Main Products:

    luminescent substrates,buffers,in vitro diagnostic reagents,Blood collection tube additives

    Location:

    C8-2-2, Optical Valley United Technology City, Gedian Development Zone, Ezhou City. Hubei,China.

    Payment Terms:

    TT against copy of documents

    Average lead Time:

    15

    Total Annual Revenue:

    $5 million-$10 million

    Total Employees:

    11-50

    Year of Establishment:

    2017

    Desheng Biochemical specializes in the research, development, production and sales of blood collection tube additives, in vitro diagnostic reagents, buffers, and luminescent substrates. In terms of blood collection tube additives, it has formed its own intellectual property rights and professional production research and development capabilities. Provide products and raw material solutions for more than 100 domestic and foreign manufacturers.

    At present, our company mainly includes: blood sample anticoagulant series products, including heparin sodium, lithium heparin, trisodium citrate, dipotassium EDTA, tripotassium EDTA, potassium oxalate, etc .; blood sample procoagulant series products, including blood procoagulant powder, Blood procoagulants, etc .; materials used for pretreatment of blood specimens, including separation gels, silicifying agents, etc .; raw materials for diagnostic reagents include: buffers, chromogen substrate production and research and development, currently chromogen substrates (new Trinder's reagents) have TOOS , TOPS, ADOS, ADPS, ALPS, DAOS, HDAOS, MADB, MAOS, TODB, etc. Buffers include Tris, Bicine, Caps, Mops, Taps, EPPS, etc .; Buffer product, white crystal, purity> 99%, absorbance <0.05. TOOS, MAOS, TOPS and other products have white crystals, high purity (greater than 99%), and good solubility, which is different from light blue or brown products on the market.

    Desheng Technology's product quality and technology have been widely recognized and used by customers in the Chinese local market. Over the years, many well-known domestic blood tube manufacturers have chosen and used Desheng products. Our products have already gone to the world, serving the health and medical undertakings of people from all over the world, and we at Desheng are extremely proud and gratified.

  • Inquiry History
    12 Inquiries
    Country Product Purchase Quantity Date Posted
    Indonesia

    Carbomer 940

    21 KG Oct 7, 2023
    Pakistan

    Thermoplastic Solid Acrylic Resin

    1 PCS Jul 2, 2026
    India

    Pure acrylic

    1.00 KG Mar 26, 2026
    India

    Modified Acrylic Resin

    20 KG Jun 28, 2024
    Saudi Arabia

    ACRYLIC THERMOPLASTIC RESIN

    300 TON Mar 11, 2024
    Vietnam

    Poly Acrylic Acid

    500.00 KG Feb 21, 2024
    Bangladesh

    Printing Binder (40% Solid Content)

    1.00 KG Oct 11, 2025
    Bangladesh

    Acrylic polymer

    2.00 20' Fcl Jul 4, 2025
    India

    Acrylic Polymer

    10000.00 KG Mar 21, 2024
    Bangladesh

    Acrylics polymer

    1.00 20' Fcl Mar 2, 2026
    Indonesia

    85-10-5, TECHNICAL GRADE, LIQUID, BULK FOR SALE

    21 KG Oct 6, 2023
    Indonesia

    China Factory Supply Carbomer / CARBOMER 690 / Carbomer 940 CAS 9007-20-9

    5 20' Fcl Oct 6, 2023
    Post an enquiry for this product
pic ×

Scan the QR Code to Share

All products displayed on this website are only for non-medical purposes such as industrial applications or scientific research, and cannot be used for clinical diagnosis or treatment of humans or animals. They are not medicinal or edible.

According to relevant laws and regulations and the regulations of this website, units or individuals who purchase hazardous materials should obtain valid qualifications and qualification conditions.

The information shown above is provided by the enterprise itself, and the authenticity, accuracy and legitimacy of the content are the responsibility of the publishing company. ECHEMI does not bear any guarantee responsibility for this. Please be aware that risks in internet transactions objectively exist.

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.