Dimethyl sulfide 75-18-3
ISO 7 Inquiries
75-18-3
Industrial Grade
99%
200kg/drum
2023-07-04
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 201737 visits to its shop, is a reputable Manufactory that has been providing Dimethyl sulfide products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
Dimethyl sulfide
Other Name:Methane,1,1′-thiobis-;Methyl sulfide;Methane,thiobis-;1,1′-Thiobis[methane];Dimethyl sulfide;DMS;2-Thiapropane;Dimethyl thioether;Methyl monosulfide;Dimethyl monosulfide;Dimethyl sulphide;Thiobis(methane);Methylthiomethane;Dimethylsulfane;(Methylsulfanyl)methane;956465-01-3
CAS No.:75-18-3
Molecular Formula:C2H6S
InChIKeys:InChIKey=QMMFVYPAHWMCMS-UHFFFAOYSA-N
Molecular Weight:62.13
Exact Mass:62.13
EC Number:200-846-2
HScode:2930909090
Categories:
Characteristics-
PSA:
25.3
XLogP3:0.84
Appearance:Dimethyl sulfide appears as a clear colorless to straw colored liquid with a disagreeable odor. Flash point less than 0°F. Less dense than water and slightly soluble in water. Vapors are heavier than air.
Density:0.8483 g/cm3 @ Temp: 20 °C
Melting Point:-98.3 °C
Boiling Point:37.3 °C
Flash Point:-36°F
Refractive Index:n20/D 1.435(lit.)
Water Solubility:Solubility in water: none
Storage Conditions:Before entering confined space where this chemical may be present, check to make sure that an explosive concentration does not exist.
Vapor Pressure:Vapour pressure, kPa at 20°C: 53.2
Vapor Density:Relative vapour density (air = 1): 2.1
Toxicity:LD50 orally in Rabbit: 535 mg/kg LD50 dermal Rabbit > 5000 mg/kg
Flammability characteristics:Lower flammable limit: 2.2% by volume; Upper flammable limit: 19.7% by volume
Explosive limit:vol% in air: 2.29.7
Odor:UNPLEASANT ODOR OF WILD RADISH, CABBAGE-LIKE
Taste:Characteristic flavor
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 2
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H225 Highly flammable liquid and vapour
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Closed system, ventilation, explosion-proof electrical equipment and lighting. Do NOT use compressed air for filling, discharging, or handling. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants. Cool.Before entering confined space where this chemical may be present, check to make sure that an explosive concentration does not exist. Store in tightly closed containers in a cool, well ventilated area. Metal containers involving the transfer of this chemical should be grounded and bonded. Where possible, automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only non-sparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flames, are prohibited where this chemical is used, handled, or stored in a manner that could create a potential fire or explosion hazard. Wherever this chemical is used, handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Inquiry History7 Inquiries
Country Product Purchase Quantity Date Posted 
Singapore
DIMETHYL SULFIDE, REDISTILLED, >=99%, FC
1 KG Dec 23, 2024 
Italy
Di methyl Sulphide
2500 MT Jul 31, 2025 
India
Dimethyl sulfide
2750.00 KG Apr 29, 2026 
Egypt
DI METHYL SULFIDE
50 KG Dec 4, 2024 
Kuwait
Di methyl Sulphide
40 MT Jun 12, 2025
India
Dimethyl Sulphate (DMS)
1300.00 KG May 15, 2024
India
DIMETHYL SULFIDE (DMS)
69000.00 KG Mar 12, 2025 Post an enquiry for this product