2-Hexanone
ISO
591-78-6
Industrial Grade
99%
200kg/drum
2023-07-03
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Product Description
-
Seller Information
-
DescriptionNANTONG REFORM PETRO-CHEMICAL CO.,LTD, with approximately 202635 visits to its shop, is a reputable Manufactory that has been providing 2-Hexanone products for 4 years on ECHEMI.CertificatesBasic Info
-
Product Name:
2-Hexanone
Other Name:2-Hexanone;n-Butyl methyl ketone;Methyl butyl ketone;Butyl methyl ketone;2-Oxohexane;Methyl n-butyl ketone;MBK
CAS No.:591-78-6
Molecular Formula:C6H12O
InChIKeys:InChIKey=QQZOPKMRPOGIEB-UHFFFAOYSA-N
Molecular Weight:100.161
Exact Mass:100.16
EC Number:209-731-1
UNII:6QDY60NH6N
ICSC Number:0489
UN Number:1224|1993
DSSTox ID:DTXSID0022068
Color/Form:Colorless liquid
HScode:29141900
Categories:
Characteristics-
PSA:
17.1
XLogP3:1.38
Appearance:Methyl butyl ketone appears as a clear colorless liquid. Flash point 95°F. Less dense than water. Vapors heavier than air.
Density:0.8113 g/cm3 @ Temp: 20 °C
Melting Point:-55.5 °C
Boiling Point:127.6 °C
Flash Point:77°F
Refractive Index:1.395
Water Solubility:H2O: 2 g/100 mL (20 ºC)
Storage Conditions:MATERIALS WHICH ARE TOXIC AS STORED OR WHICH CAN DECOMPOSE INTO TOXIC COMPONENTS SHOULD BE STORED IN A COOL WELL VENTILATED PLACE, OUT OF THE DIRECT RAYS OF THE SUN, AWAY FROM AREAS OF HIGH FIRE HAZARD, AND SHOULD BE PERIODICALLY INSPECTED. INCOMPATIBLE MATERIALS SHOULD BE ISOLATED
Vapor Pressure:Vapour pressure, kPa at 20°C: 0.36
Vapor Density:3.45
Toxicity:LD50 orally in rats: 2.59 g/kg (Smyth)
Flammability characteristics:Class IC Flammable Liquid: Fl.P. at or above 73°F and below 100°F.
Explosive limit:vol% in air: 1.2.0
Odor:Characteristic acetone like odor, but more pungent
OH:9.10e-12 cm3/molecule*sec
Henrys Law Constant:Henry's Law constant = 9.32X10-5 atm-cu m/mol at 25 °C (est)
Experimental Properties:1 ppm is equivalent to 4.10 mg/cu m; 1 mg/L is equivalent to 244 ppm at 25 °C, 760 mm Hg /vapor/|Saturated air concentration: 0.5%|Wt/vol, at 20 °C: 6.75 lb/gal (US); 0.81 kg/l; and 8.10 lb/gal (Imperial); Branched chain ketones, max wt%= 5|Distillation range: 124-130 °C; Status under Rule 66: NPCR (not photochemically reactive)|For more Other Experimental Properties (Complete) data for 2-HEXANONE (6 total), please visit the HSDB record page.
Air and Water Reactions:Highly flammable. Slightly soluble in water.
Reactive Group:Ketones
Reactivity Alerts:Highly Flammable
Reactivity Profile:METHYL BUTYL KETONE is incompatible with oxidizing agents. It may also react with strong bases and reducing agents. (NTP, 1992)
Autoignition Temperature:795 °F (USCG, 1999)|795 °F (423 °C)|423 °C
Heat of Combustion:-16,000 Btu/lb = -8,940 cal/g = -374X10+5 J/kg
Ionization Potential:9.34 eV
Flammable Limits:Lower flammable limit: 1.2% by volume; Upper flammable limit: 8% by volume|Class IC Flammable Liquid: Fl.P. at or above 73°F and below 100°F.
Heat of Vaporization:36.05 kJ/mol
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Specific target organ toxicity â single exposure, Category 3
Specific target organ toxicity â repeated exposure, Category 1
Reproductive toxicity, Category 2
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H226 Flammable liquid and vapour
H336 May cause drowsiness or dizziness
H372 Causes damage to organs through prolonged or repeated exposure
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P203 Obtain, read and follow all safety instructions before use.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P318 IF exposed or concerned, get medical advice.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. Above 23°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from strong oxidants.MATERIALS WHICH ARE TOXIC AS STORED OR WHICH CAN DECOMPOSE INTO TOXIC COMPONENTS ... SHOULD BE STORED IN A COOL WELL VENTILATED PLACE, OUT OF THE DIRECT RAYS OF THE SUN, AWAY FROM AREAS OF HIGH FIRE HAZARD, AND SHOULD BE PERIODICALLY INSPECTED. INCOMPATIBLE MATERIALS SHOULD BE ISOLATED ...
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals
-
Location:
17th Yuanlin Road ,Chongchuan area ,Nantong city ,Jiangsu province ,China
-
Payment Terms:
L/C,100% TT in advance
-
Average lead Time:
2
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
201-300
-
Year of Establishment:
2008
-
Certifications:
GB/T19001-2016 / Iso9001:2015
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product