isooctanal
TDS 1 Inquiries
123-05-7
Industrial Grade
99%
Shanghai
180kg/tup
2024-12-31
2-chloro-1.3-butadiene.,N,N-Diethyl isopropyl amine,1-Hexene,1-Heptene,2-Ethylhexanal
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionCertificatesBasic Info
-
Product Name:
2-Ethylhexanal
Other Name:Hexanal,2-ethyl-;Caproaldehyde,α-ethyl-;2-Ethylhexanal;Butylethylacetaldehyde;Ethylbutylacetaldehyde;α-Ethylcaproaldehyde;2-Ethylhexaldehyde;2-Ethylhexylaldehyde;3-Formylheptane;α-Ethylhexanal;2-Ethylcaproaldehyde;(±)-2-Ethylhexanal;NSC 42871;58712-00-8
CAS No.:123-05-7
Molecular Formula:C8H16O
InChIKeys:InChIKey=LGYNIFWIKSEESD-UHFFFAOYSA-N
Molecular Weight:128.21
Exact Mass:128.21
BRN:1700556
EC Number:204-596-5
ICSC Number:0621
NSC Number:42871
UN Number:1191
DSSTox ID:DTXSID9025291
Color/Form:Colorless high-boiling liquid
HScode:29121990
Categories:
Characteristics-
PSA:
17.1
XLogP3:3.07
Appearance:Clear colorless Liquid
Density:0.8540 g/cm3 @ Temp: 20 °C
Melting Point:<-100 °C
Boiling Point:163 °C @ Press: 760 Torr
Flash Point:108 °F
Refractive Index:n 20/D 1.415(lit.)
Water Solubility:Slightly soluble in water.
Storage Conditions:Flammables area
Vapor Pressure:Vapour pressure, Pa at 20°C: 200
Vapor Density:Relative vapour density (air = 1): 4.5
Toxicity:Oral-rat LD50: 3730 mg/kg; Oral-Mouse LD50: 3550 mg/kg
Flammability characteristics:Flammable; spontaneous combustion in the air; thermal decomposition emits spicy irritating smoke
Explosive limit:1.0-6.6%(V)
Odor:Mild odor
Experimental Properties:Liquid molar volume = 0.156518 cu m/kmol|IG Heat of Formation = -2.996X10+8 J/kmol|Heat Capacity = 1.9391 J/g-K at 25 °C|Henry's Law constant = 8.4X10-4 atm-cu m/mole at 25 °C /Estimated via measured water solubility (400 mg/L) and vapor pressure (2 mm Hg)/|Hydroxyl radical reaction rate constant = 3.4X10-11 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Spontaneously flammable in air. [Steele and Dugan, Chem. Eng. 66:160(1960)]. Insoluble in water.
Reactive Group:Aldehydes
Reactivity Alerts:Highly Flammable
Reactivity Profile:2-ETHYLHEXALDEHYDE is an aldehyde. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.
Peroxide Forming Chemical:2-Ethylhexanal|D: Other compounds that may form peroxides|Kelly|Ignighted with extended contact with air. See Bretherick's.|Steele, A. B. et al., Chem. Engrg., 1969, 66, 160
Autoignition Temperature:387 °F (USCG, 1999)|190 °C; 375 °F|180 °C
Flammable Limits:Lower flammable limit: 0.85% by volume @ 93 °C (200 °F); Upper flammable limit: 7.2% by volume @135 °C (275 °F)
Physical Dangers:The vapour is heavier than air.
Heat of Vaporization:38.73 kJ/mol at normal boiling point
Critical Temperature & Pressure:Critical temperature: 607 deg K (est); critical pressure2.58X10+6 Pa (est)
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Skin sensitization, Sub-category 1B
Reproductive toxicity, Category 2
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
H317 May cause an allergic skin reaction
H361 Suspected of damaging fertility or the unborn child
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P203 Obtain, read and follow all safety instructions before use.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P317 If skin irritation or rash occurs: Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P318 IF exposed or concerned, get medical advice.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames, NO sparks and NO smoking. NO contact with hot surfaces. Above 46°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from acids, bases and oxidants. Cool. Well closed.Store in tightly closed containers in a cool, well ventilated area away from oxidizers, strong bases and combustible materials.
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
2-chloro-1.3-butadiene.,N,N-Diethyl isopropyl amine,1-Hexene,1-Heptene,2-Ethylhexanal
-
Location:
Room 102, Building 1, Jinxi Jiayuan, Aixi Road, Xin 'anjiang Street, jiande city, Hangzhou City, Zhejiang Province,China
-
Payment Terms:
TT against copy of documents,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
180
-
Total Annual Revenue:
Less than $1 million
-
Total Employees:
201-300
-
Year of Establishment:
2017
-
-
Inquiry History1 Inquiries
Country Product Purchase Quantity Date Posted
France
2-Ethylhexanal
4 MT Feb 16, 2026 Post an enquiry for this product