Itaconic Anhydride CAS NO 2170-03-8 White crystal purity 98% dideu
TDS
2170-03-8
Industrial Grade
98%
by FedEx door to door
Dideu
25kg/Drum
2025-02-23
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Product Description
-
Seller Information
-
DescriptionECHEMI Editorial ReferenceWHITE TO CREAM CRYSTALLINE POWDER
Itaconic anhydride (ITA) is a biobased material that is obtained from renewable resources. It is produced from the pyrolysis of citric acid or by fermenting carbohydrates which forms itanoic acid. Itanoic acid can be dehydrated to form an anhydride. It is relatively more reactive that maleic anhydride and can be used as an alternating monomer that facilitates the introduction of polar functionalities in polymers.
Crystallise the anhydride from CHCl3/pet ether. It can be distilled under reduced pressure. Distillation at atmospheric pressure, or prolonged distillation causes rearrangement to citraconic anhydride (2-methylmaleic anhydride). If the material (as seen in the IR spectrum) contains much free acid, then heat with acetyl chloride or SOCl2, evaporate and distil at as high a vacuum as possible. The crude anhydride deposits crystals of itaconic acid on standing probably due to hydrolysis by H2O — store it in sealed ampoules under dry N2. [Skinner et al. Org Synth Coll Vol II 368 1943, IR: Nagai Bull Chem Soc Jpn 37 369 1964, Kelly & Segura J Am Chem Soc 56 2497 1934, Beilstein 17/11 V 66.]CertificatesBasic Info-
Product Name:
Itaconic anhydride
Other Name:2-Methylenebutanedioic anhydride;Methylenesuccinic acid anhydride;3,4-Dihydro-3-methylene-2,5-furandione Methylenesuccinic Anhydride;Itaconic anhydride(2-Methylenesuccinic anhydride);Itaconic anhydride 95%;Itaconic anhydride,98%;ITACONIC ANHYDIDE;ITACONIC ANHYDRIDE
CAS No.:2170-03-8
Molecular Formula:C5H4O3
InChIKeys:OFNISBHGPNMTMS-UHFFFAOYSA-N
Molecular Weight:112.08
Exact Mass:112.08
BRN:2212
EC Number:218-518-2
UNII:Y455KS1U7Q
NSC Number:43979|43972
TSCA:TSCA listed
DSSTox ID:DTXSID8062230
Color/Form:White to cream
HScode:2917 19 80
Categories:
Characteristics-
PSA:
43.4
XLogP3:0.01610
Appearance:White to cream Crystalline Powder
Density:1.2600
Melting Point:66-68 °C (lit.)
Boiling Point:114-115 °C/12 mmHg (lit.)
Flash Point:114-115°C/12mm
Refractive Index:1.5130 (estimate)
Water Solubility:Hydrolyzes in water.
Storage Conditions:Store below +30°C.
Critical Temperature & Pressure:Store below +30°C.
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 4, Oral
Skin irritation, Category 2
Skin sensitization, Category 1
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H302 Harmful if swallowed
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
Response P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P333+P317 If skin irritation or rash occurs: Get medical help.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Location:
https://www.dideu.com/en/
-
Payment Terms:
TT against copy of documents,D/P,L/C,D/A,O/A,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
7
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
Above 1000
-
Year of Establishment:
2016
-
Certifications:
ISO Certificate,REACH
"> -
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
