Fast Selling Sodium hexametaphosphate Tech grade CAS 10124-56-8

Section 1: Chemical Product and Company Identification

Product Name: Sodium hexametaphosphate

Catalog Codes: SLS2209

CAS#: 10124-56-8 or 68915-31-1

RTECS: OY3675000

TSCA: TSCA 8(b) inventory: Sodium hexametaphosphate

CI#: Not available.

Synonym: Calgon, HMP, Medi-Calgon, SHMP; Sodium

Polyphosphates; Glassy; Sodium Polymetaphosphate;

Sodium phosphate glass; Polyphosphoric Acids, sodium

salts

Chemical Name: Metaphosphoric Acid, hexasodium salt

Chemical Formula: (NaPO3)n or (NaPO3)*6 or O18-

P6.6Na

Section 2: Hazards Identification

2.1 classification of the substance or mixture

Not a hazardous substance or mixture according to Regulation (EC) No.1272/2008.

2.2 Label elements

Not a hazardous substance or mixture according to Regulation (EC) No.1272/2008.

2.3 Other hazards-none

Section 3: Composition and Information on Ingredients

Composition:

Name CAS # % by Weight

Sodium hexametaphosphate 10124-56-8 or 100

68915-31-1

Toxicological Data on Ingredients: Sodium hexametaphosphate: ORAL (LD50): Acute: 6200 mg/kg [Rat]. 4320 mg/kg

[Mouse]. 3053 mg/kg [Rat].

Section 4: First Aid Measures

Eye Contact:

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15

minutes. Cold water may be used. Get medical attention.

Skin Contact:

Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water

may be used.

Serious Skin Contact: Not available.

Inhalation:

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical

attention.

Serious Inhalation: Not available.

Ingestion:

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious

person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.

Serious Ingestion: Not available.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.

Auto-Ignition Temperature: Not applicable.

Flash Points: Not applicable.

Flammable Limits: Not applicable.

Products of Combustion: Not available.

Fire Hazards in Presence of Various Substances: Not applicable.

Explosion Hazards in Presence of Various Substances:

Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in

presence of static discharge: Not available.

Fire Fighting Media and Instructions: Not applicable.

Special Remarks on Fire Hazards:

When heated to decomposition it emits highly toxic fumes of ohosphoxides and Na2O. Behavior in a fire: It may melt with loss

of steam.

Special Remarks on Explosion Hazards: Not available.

Section 6: Accidental Release Measures

Small Spill:

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on

the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill:

Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the

contaminated surface and allow to evacuate through the sanitary system.

Section 7: Handling and Storage

Precautions:

Do not ingest. Do not breathe dust. Avoid contact with eyes. Wear suitable protective clothing. If ingested, seek medical advice

immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents, acids.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Section 8: Exposure Controls/Personal Protection

Engineering Controls:

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended

exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants

below the exposure limit.

Personal Protection:

Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Personal Protection in Case of a Large Spill:

Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid

inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this

product.

Exposure Limits: Not available.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid. (Crystals solid.)

Odor: Odorless.

Taste: Not available.

Molecular Weight: (101.96)*6 or 611.52 g/mole

Color: White.

pH (1% soln/water): 7 [Neutral.]

Boiling Point: 1500°C (2732°F)

Melting Point: 550°C (1022°F)

Critical Temperature: Not available.

Specific Gravity: Density: 1.25 (Water = 1)

Vapor Pressure: Not applicable.

Vapor Density: Not available.

Volatility: Not available.

Odor Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: See solubility in water.

Solubility:

Easily soluble in cold water, hot water. Soluble in water, but it dissolves slowly. Depolymerizes in aqueous solutions to form

sodium trimetaphosphate and sodium orthophosphates. Insoluble in organic solvents.

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Incompatible materials

Incompatibility with various substances: Reactive with oxidizing agents.

Corrosivity: Slightly corrosive in presence of steel.

Special Remarks on Reactivity: Hygroscopic; keep container tightly closed.

Special Remarks on Corrosivity: Not available.

Polymerization: Will not occur.

Section 11: Toxicological Information

Routes of Entry: Inhalation. Ingestion.

Toxicity to Animals: Acute oral toxicity (LD50): 3053 mg/kg [Rat].

Chronic Effects on Humans: Not available.

Other Toxic Effects on Humans:

Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant, sensitizer), of inhalation.

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans:

Potential Health Effects: Skin: May cause skin irritation. Eyes: Causes eye irritation. Inhalation: May cause respiratory tract

irritation. Symptoms may include coughing and shortness of breath. Ingestion: Phosphates are slowly and incompletely

absorbed when ingested, and seldom result in systemic effects. However, such effects have occurred. May cause

gastrointestinal tract irritation with nausea, vomiting, and diarrhea. May affect behavior/central nervous system/peripherial

nervous system (somnolence, convulsions, lethargy, flaccid paralysis), urinary system (kidneys- renal failure, acute tubular

necrosis). It may also cause heart disturbances (fall in blood pressure, slow pulse) and blood chemistry effects (reduction

of serum level of calcium). The toxicity of phosphates is because of their ability to sequester calcium. Systemic metabolic

acidosis may result as this material is believed to be hydrolyzed to ortho phosphates when ingested (before absorption).

Tetany may also occur as a result of reduction in serum level of ionic calcium.

Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation:

Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.

Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations

Waste Disposal:

Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14: Transport Information

DOT Classification:DOT controlled material (United States).

Identification:applicable.

Special Provisions for Transport:applicable.

Section 15: Other Regulatory Information

Federal and State Regulations:

Pennsylvania RTK: Sodium hexametaphosphate Massachusetts RTK: Sodium hexametaphosphate New Jersey: Sodium

hexametaphosphate TSCA 8(b) inventory: Sodium hexametaphosphate

Other Regulations: EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.

Other Classifications:

WHMIS (Canada): Not controlled under WHMIS (Canada).

DSCL (EEC):

R36- Irritating to eyes. S24/25- Avoid contact with skin and eyes. S36/37/39- Wear suitable protective clothing, gloves and

eye/face protection. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where

possible).

HMIS (U.S.A.):

Health Hazard: 2

Fire Hazard: 0

Reactivity: 0

Personal Protection: E

National Fire Protection Association (U.S.A.):

Health: 2

Flammability: 0

Reactivity: 0

Specific hazard:

Protective Equipment:

Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

Section 16: Other Information

References: -Hawley, G.G.. The Condensed Chemical Dictionary, 11e ed., New York N.Y., Van Nostrand Reinold, 1987.

Other Special Considerations: Not available.

Created: 10/09/2005 06:32 PM

Last Updated: 11/01/2018 12:00 PM

The information above is believed to be accurate and represents the best information currently available to us. However, we

make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume

no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for

their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for

lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com

has been advised of the possibility of such damages.

FAQ

1. who are we?
We are based in United States, start from 2010,sell to Domestic Market(00.00%). There are total about 5-10 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PVC, HDPE, LDPE, Wax, Ethonl

4. why should you buy from us not from other suppliers?
Our products are high quality and low price, with more than 20 years of export experience, products are exported to more than 100 countries around the world

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP；
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Cash,Escrow;
Language Spoken:English,Chinese