Industrial Grade Isooctyl Acrylate 99.0% Purity Colorless Acrylic Monomer
1 Inquiries
1330-61-6
Industrial Grade
99%
Qingdao Port
180kg/Drum; IBC
2026-10-09
Acrylic
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionECHEMI Editorial ReferenceLiquid
Isodecyl acrylate is a colorless liquid with a weak odor. Floats on water. (USCG, 1999)|Liquid
Isodecyl acrylate is a colorless liquid with a weak odor. Floats on water. (USCG, 1999)Basic Info-
Product Name:
Isodecyl acrylate
Other Name:2-Propenoic acid,isodecyl ester;Acrylic acid,isodecyl ester;Isodecyl alcohol,acrylate;Isodecyl acrylate;SR 395;SR 396;Sartomer 395;Miramer M 130;EM 219;EM 219 (acrylate);Miramer 130;M 130;M 130 (ester);Sartomer SR 395;SR 395NS;Photomer 4810;EM 2191;FA 111A;IDAA;32073-49-7;1467079-46-4;1467081-67-9
CAS No.:1330-61-6
Molecular Formula:C13H24O2
InChIKeys:LVGFPWDANALGOY-UHFFFAOYSA-N
Molecular Weight:212.329
Exact Mass:212.177628
EC Number:215-542-5
UNII:WET3U98PW2
UN Number:3082
DSSTox ID:DTXSID7027386
Color/Form:Colorless|Water-white liquid
HScode:2916129000
Categories:
Characteristics-
PSA:
26.30000
XLogP3:5.39
Appearance:Isodecyl acrylate is a colorless liquid with a weak odor. Floats on water. (USCG, 1999)
Density:0.885 g/cm3 @ Temp: 20 °C
Melting Point:-100 °C
Boiling Point:158 °C @ Press: 50 Torr
Flash Point:92.1±12.0 °C
Refractive Index:1.439
Water Solubility:Solubility in water: 0.010 lb/100 lb at 68 deg C
Storage Conditions:The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. Moisture may cause rust-initiated polymerization. /Acrylic acid & derivatives/
Vapor Pressure:0.023 mm Hg @ 25 deg C /Estimated/
Vapor Density:Saturated vapor density= 0.02053 lb/cu ft @ 304 deg F
Odor:Weak acrylate
Henrys Law Constant:Henry's Law constant: 1.2X10-3 atm-cu m/mol @ 25 °C /Estimated/
Experimental Properties:React readily with electrophilic, free-radical, and nucleophilic agent /Acrylic acid and esters/|FP: -148 °F= -100 °C= 173 K; liq-water interfacial tension: (est) 30 dynes/cm= 0.003 n/m @ 20 °C; heat of polymerization: (est) -119 btu/lb= -66 cal/g= -2.8x10+5 J/kg; liquid heat capacity= 0.461 btu/lb-f @ 70 °F; liquid thermal conductivity= 1.048 btu-in/hr-sq ft-f at 70 °F; saturated vapor pressure= 0.792 lb/sq in @ 304 °F|Hydroxyl radical reaction rate constant: 2.2X10-11 cu cm/molecule-sec @ 25 °C /Estimated/
Air and Water Reactions:No rapid reaction with air. No rapid reaction with water.
Reactive Group:Acrylates and Acrylic Acids
Reactivity Alerts:Polymerizable
Reactivity Profile:ISODECYL ACRYLATE is an acrylate ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Polymerizes readily in the presence of heat and light generating much heat; reacts with strong oxidants. REF [Handling Chemicals Safely, 1980. p. 235]. Reaction is not violent (USCG, 1999).
Heat of Combustion:HEAT OF COMBUSTION: (EST) -16,300 BTU/LB= -9,100 CAL/G= -380X10+5 J/KG
Heat of Vaporization:LATENT HEAT OF VAPORIZATION: 110 BTU/LB= 61 CAL/G= 2.6X10+5 J/KG
Hazard IdentificationClassification of the substance or mixture
Skin irritation, Category 2
Skin sensitization, Sub-category 1B
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H411 Toxic to aquatic life with long lasting effects
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P333+P317 If skin irritation or rash occurs: Get medical help.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P391 Collect spillage.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. Moisture may cause rust-initiated polymerization. Acrylic acid & derivatives
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
Acrylic
-
Location:
2nd Floor, No. 33 Lianxin Road, Liantang Town, Qingpu District, Shanghai
-
Payment Terms:
TT against copy of documents,D/A,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
20
-
Total Annual Revenue:
$1 million-$2.5 million
-
Total Employees:
5-10
-
Year of Establishment:
2022
-
-
Inquiry History1 Inquiries
Country Product Purchase Quantity Date Posted 
United Kingdom
Isodecyl acrylate
50 KG Oct 7, 2024 Post an enquiry for this product
