Diethoxymethane
-
Diethoxymethane
structure -
-
CAS No:
462-95-3
-
Formula:
C5H12O2
-
Chemical Name:
Diethoxymethane
-
Synonyms:
Ethane,1,1′-[methylenebis(oxy)]bis-;Methane,diethoxy-;1,1′-[Methylenebis(oxy)]bis[ethane];Diethoxymethane;Ethylal;Diethylformal;Formaldehyde diethyl acetal;Ethoxymethyl ethyl ether;1,1-Diethoxymethane;3,5-Dioxaheptane;NSC 6754;(Ethoxymethoxy)ethane
- Categories:
-
CAS No:
Description
colourless liquid
Diethoxymethane appears as a colorless volatile liquid with an agreeable odor. Less dense than water. Vapors heavier than air. May be narcotic in high concentrations. Used as a solvent and in the manufacture of cosmetics.|Liquid
Diethoxymethane appears as a colorless volatile liquid with an agreeable odor. Less dense than water. Vapors heavier than air. May be narcotic in high concentrations. Used as a solvent and in the manufacture of cosmetics.
Diethoxymethane Basic Attributes
104.149
104.15
207-330-6
56IT408V5Y
6754
2373
DTXSID6052112
2909199090
Characteristics
18.5
0.80
Diethoxymethane appears as a colorless volatile liquid with an agreeable odor. Less dense than water. Vapors heavier than air. May be narcotic in high concentrations. Used as a solvent and in the manufacture of cosmetics.
0.7879 g/cm3 @ Temp: 20.0 °C
-66.5 °C
88 °C
-5.6±0.0 °C
1.380
H2O: 4.2 G/100 ML
60 mm Hg ( 25 °C)
LD50 orally in Rabbit: 3536 mg/kg LD50 dermal Rat > 16600 mg/kg
1.68e-11 cm3/molecule*sec
Highly flammable. Soluble in water.
Ethers
Highly Flammable
DIETHOXYMETHANE, an acetal, is incompatible with strong oxidizing agents and acids. Breaks down to formaldehyde and ethanol in acidic solutions.
Diethoxymethane|D: Other compounds that may form peroxides|Kelly|https://cameochemicals.noaa.gov/chemical/3189
Safety Information
II
3
UN 2373 3/PG 2
2
R11;R36/37/38
S16-S26-S36
PA8500000
F:Flammable;Xi:Irritant;
Stable. Highly flammable. Incompatible with strong oxidizing agents, strong acids.
P210-P261-P305 + P351 + P338
H225-H315-H319-H335
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 3rd degree, Reactive - 3rd degree
|Danger|H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]|P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 204 companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. CAUTION: For fire involving UN1170, UN1987 or UN3475, alcohol-resistant foam should be used. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution. (ERG, 2016)
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. (ERG, 2016)
Diethoxymethane Use and Manufacturing
Diethoxymethane (DEM) is offered by Eastman Chemical Company as a cost-effective replacement solvent for monoglyme (1,2- dimethoxyethane) and methylal. The DEM diether is stable under alkaline conditions, but can be cleaved by strong acids. Diethoxymethane can be used as a chemical intermediate in many organic synthesis reactions. Diethoxymethane is useful as a solvent in lithium batteries with nonaqueous electrolytes, as a solvent for polymeric materials, and as a fuel additive. As a chemical intermediate DEM can act as an ethoxymethylating reagent for alcohols and phenols and serve as a source for formaldehyde in organic synthesis.
Intermediates
Non-TSCA use
All other basic organic chemical manufacturing|Ethane, 1,1'-[methylenebis(oxy)]bis-: ACTIVE
Food additives -> Flavoring Agents|Fire Hazards -> Flammable - 3rd degree, Reactive - 3rd degree
Flavoring Agents
Computed Properties
Molecular Weight:104.15
XLogP3:0.8
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:4
Exact Mass:104.083729621
Monoisotopic Mass:104.083729621
Topological Polar Surface Area:18.5
Heavy Atom Count:7
Complexity:25.3
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Diethoxymethane
-
CN
2 YRS
Business licensedTrader Supplier of Dicobalt Octacarbonyl,(E,E)-Farnesol,(4S,5R)-4-Methyl-5-phenyloxazolidin-2-one,Geranyl linalool,farnesyl acetone -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Active Pharm Ingredients,Chemical Catalyst,Pharmaceutical Intermediates,Flavors and Fragrances,Agrochemicals,Chemical Pesticides,Organic Intermediates,OLED IntermediatesInquiryCAS No.: 462-95-3Grade: Industrial GradeContent: 99% -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals
Learn More Other Chemicals
-
Perfluoro(1,3-dimethylcyclohexane)
335-27-3
-
Diisononyl adipate
33703-08-1
-
3,5,5-Trimethyl-1-hexanol
3452-97-9
-
Perfluorohexane Formula
355-42-0
-
Farnesane Formula
3891-98-3
-
2-Butyl-1-octanol Formula
3913-02-8
-
DIBUTYLOCTYL MALATE Structure
399551-19-0
-
Perfluorooctyl bromide Structure
423-55-2
-
What is Acryloxypropyltrimethoxysilane
4369-14-6
-
What is (±)-2,2,4,4,6,8,8-Heptamethylnonane
4390-04-9