Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > LITHIUM MANGANESE OXIDE

LITHIUM MANGANESE OXIDE

LITHIUM MANGANESE OXIDE structure

LITHIUM MANGANESE OXIDE 

structure
  • CAS No:

    12057-17-9

  • Formula:

    LiMn2O4

  • Chemical Name:

    LITHIUM MANGANESE OXIDE

  • Synonyms:

    LITHIUM MANGANESE(III,IV) OXIDE;LITHIUM MANGANESE OXIDE;LITHIUM MANGANESE(III,IV) OXIDE, ELECTRO -CHEMICAL GRADE;Lithium manganese oxide (LiMn2O4);Lithium manganese(III,IV) oxide, 99.5% (metals basis);Lithium manganese oxide spinel, powder, <0.5 mum particle size (BET), >99%;Lithium manganese(III,IV) oxide, 99.5% trace metals basis;LITHIUM MANGANESE OXIDE ISO 9001:2015 REACH

  • Categories:

    Inorganic Chemistry  >  Inorganic Salts

Description

monoclinic, a=0.4921 nm, b=0.8526 nm, c=0.9606 nm; prepared by reacting LiOH and γ-ΜnΟ2 in air at 400°C for several days or at 700°C for 24h; used in battery research [ROS91] [RIO92]


This product has been enhanced for energy efficiency.

LITHIUM MANGANESE OXIDE Basic Attributes

180.81

180.87200

TSCA listed

Characteristics

74.27000

Usually spinel phase, working voltage is 3.5~4.3 V, theoretical specific capacity is 148 mA h/g, but the actual is about 110 mA h/g, cathode density is 4.28 g/cm3, and its lithium/manganese molar ratio is 0.45 ~0.5.

-0.47520

Powder

4.1g/cm3at 25℃

>400 °C(lit.)

Insoluble in water.

Safety Information

NONH for all modes of transport

3

Toxicity

ACGIH: TWA 0.02 mg/m3; TWA 0.1 mg/m3OSHA: Ceiling 5 mg/m3NIOSH: IDLH 500 mg/m3; TWA 1 mg/m3; STEL 3 mg/m3

LITHIUM MANGANESE OXIDE Use and Manufacturing

Methods of Manufacturing

The synthesis method uses manganese dioxide, manganese carbonate, manganese nitrate or manganese acetate and lithium hydroxide, lithium carbonate or lithium nitrate as raw materials, and accurately analyzes the composition and content of various materials, so that the molar ratio of lithium to manganese is in the range of 0.45 to 0.5 After mixing uniformly by ball milling, place it in a mold, press it into a block on a hydraulic press, and place it in a high-temperature sintering furnace at a temperature of 600-800℃. After sintering for a total of 36 hours, take out the crushing ball mill and pass through a 300 mesh sieve , Collect products. Its synthesis 4MnO2+Li2CO3→2LiMn2O4+CO2↑+0.5O24MnCO3+Li2CO3+1.5O2→2LiMn2O4+5CO2↑4MnO2+2LiOH→2LiMn2O4+H2O+0.5O2

Uses

High performance lithium ion battery cathode material.

Recommended Suppliers of LITHIUM MANGANESE OXIDE

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.