4,5-DIAZAFLUOREN-9-ONE
-
4,5-DIAZAFLUOREN-9-ONE
structure -
-
CAS No:
50890-67-0
-
Formula:
C11H6N2O
-
Chemical Name:
4,5-DIAZAFLUOREN-9-ONE
-
Synonyms:
Dafo;4,5-DIAZAFLUOREN-9-O;4,5-DIAZAFLUORENE-9-ONE;4,5-Diazafluoren-9-one, 98+%;5H-Cyclopenta[1,2-b:5,4-b']dipyridin-5-one;4,5-Diazafluoren-9-one 97%;50890-67-0;AKOS BBS-00000188
- Categories:
-
CAS No:
Characteristics
42.8
1
1.4±0.1 g/cm3
214-217 °C(lit.)
196.1±27.4 °C
1.689
Soluble in dichloromethane, tetrahydrofuran, chloroform, benzene, toluene and polar organic solvents. Insoluble in diethyl ether and alkanes.
Safety Information
NONH for all modes of transport
3
36/37/38
26-37/39
Xi
P261-P305 + P351 + P338
H315-H319-H335
|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 39 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
4,5-DIAZAFLUOREN-9-ONE Use and Manufacturing
1, 10-Phenanthroline (4.0g, 22.2mmol) and KOH (4.0g, 71.3mmol) in water (250mL) were boiled for 1h. A hot solution of KMnOIn a 5L three-necked flask, Add o-phenanthroline (36g, 0.2mol)And freshly prepared potassium hydroxide solution (2.5L, 0.35M), Stir and heat to reflux.Dissolve 105.2g of potassium permanganate in 400mLAfter the water is heated and dissolved, Add a constant pressure dropping funnel to the reaction mixture.Control the dripping speed, About 4h finished, The reaction was continued at reflux for 5 h.Hot filter, Wash cake, Get orange filtrate, Let stand to cool to room temperatureExtract with dichloromethane (3 x 20 mL), Combine the extracts, Dry with anhydrous Na2SO4, Spin-evaporated to a light yellow solid, Finally recrystallized from methanol, Vacuum dryingYellow needle crystals (Compound 1)(17.3 g, 0.095 mol), yield 47.5percent.In a 5 L three-necked flask, phenanthroline (36 g, 0.2 mol) and a freshly prepared potassium hydroxide solution (2.5 L, 0.35 M) were added, stirred, and heated to reflux. 105.2 g of potassium permanganate was dissolved in 400 mL of water, dissolved by heating, and then added to the reaction mixture by a constant pressure dropping funnel to control the dropping rate. After about 4 hours, the reflux reaction was continued for 5 hours. The mixture was filtered while hot, and the filter cake was washed with water to give an orange-yellow filtrate, which was cooled to room temperature, and extracted with dichloromethane (3×20 mL). The extracts were combined, dried over anhydrous Na2SO4 and evaporated to give a pale yellow solid. Recrystallization of methanol, vacuum drying, to obtain yellow needle crystals (Compound 1)(17 · 3g, 0 · 095mol), yield 47 • 5percent mp: 213°C.In a 5L three-necked flask, Add phenanthroline (36g, 0.2mol) and freshly prepared potassium hydroxide solution (2.5L, 0.35 M), stirred and heated to reflux.Dissolve 105.2 g of potassium permanganate in 400 mL of water.After heating and dissolving, Adding to the reaction mixture using a constant pressure dropping funnel, Control the drop rate, After about 4 hours, The reflux reaction was continued for 5 h.Hot filtered, Wash the filter cake, Obtaining an orange filtrate, Allow to cool to room temperature, Extracted with dichloromethane (3 x 20 mL), Combine the extracts, Dry with anhydrous Na2SO4, Evaporated to give a pale yellow solid.Finally recrystallized from methanol, Vacuum drying, Yellow needle crystals (compound 1)(17.3 g, 0.095 mol), yield 47.5percentA 2 L separable flask was charged with 18 g (99.9 mmol) of fenanthroline, 18 g (320.8 mmol) of potassium hydroxide and 900 g of water, and the content was heated to 80° C. A mixed liquid comprising 45 g of potassium permanganate and 720 g of water was dropwise added to the content while the content was stirred at that temperature. After the completion of addition, the stirring was further continued for 30 minutes and the reaction was terminated. The hot reaction liquid was filtered to remove manganese dioxide. Then the reaction liquid was allowed to cool to room temperature, and then extracted with chloroform. The extract was treated in the conventional manner, and concentrated to give a yellow powder. Recrystallization of the powder from acetone gave 7.54 g of a yellow needle crystal (yield: 41percent). The identification of the crystalline compound was conducted by In a 5-L three-necked flask, 1, 10-phenanthroline (50 g, 0.28 mol) was added.2000mL new potassium hydroxide solution (0.36mol/L), The mixture was heated and dissolved with stirring, and 131.1 g of potassium permanganate (KMnO4) was weighed to form a saturated solution.The reaction warmed to 125°C.The saturated KMnO4 saturated solution was dropped into the reaction with a constant pressure dropping funnel, and was dripped for about 1 hour.Continue to react for more than 12h.After the end of the reaction, using a Buchner funnel hot filtration, cooling, and then extracted with dichloromethane (CH2Cl2, 3 x 20mL), the filtrate was dried over anhydrous sodium sulfate, rotary steam, Obtained pale yellow solid product 5H-cyclopenta[1, 2-b:5, 4-b']dipyridin-5-one (Compound 1) (20.8 g, 0.11 mol) in a yield of 39.3percentA mixture of 2. 5 g (13.75 mmol) of 1, 10-phenanthroline, 2. 5 g (44.65 mmol) of K0H was dissolved in 250 ml of water and heated to boiling.Another weighing 6.25 (39.5mmol) KMn04 dissolved in 200ml of hot water, The KMn04 solution was slowly added dropwise to the above-mentioned phenanthroline reaction solution, Control 2h drops finished, After dripping the reaction solution to continue boiling lOmin, Filter hot to remove Mn02, The filtrate was extracted with chloroform (3X200 ml)The organic phase was dried with anhydrous MnS04, The solvent was removed by distillation under reduced pressure on a rotary evaporator, The resulting solid was recrystallized from acetone to give a yellow crystal, 75 g, The yield was 35. 5percentConstant voltage dropping funnel in a 500 ml three-mouth bottle, sequentially adding a 1, 10-O-phenan throline 5.9g in other words 0.03mol, potassium hydroxide 3.06g in other words 0.055mol, distilled water 200 ml, electromagnetic stirring under heating to reflux, the solid completely dissolved after to, self-constant-voltage dropping funnel dropping slowly added in an aqueous solution of potassium permanganate, the aqueous solution of potassium permanganate 15.2g potassium permanganate dissolved in 125 ml distilled water, after the add, to continue to reflux reaction 2h, hot filtering, cooling the filtrate after precipitation with yellow acicular crystal, pulls out worry, washing, drying to obtain light yellow crystal, yield 25percent, 1, 10-Phenanthroline (0.025 mmol) and KOH (0.046 mmol) were added to 200 mL water and a resulting mixture was brought to a reflux followed by dropwise addition of aqueous solution of potassium permanganate (0.08 mmol) to it. After addition, the solution was refluxed for 30 min and filtered off to remove MnOWeigh 5.00 g (25.3 mmol) of phenanthroline monohydrate and 5.00 g (89.3 mmol)Potassium hydroxide in water, heated to boiling, 13.00 g (82.3 mmol) of potassium permanganate in hot water (150 mL water, stirring)70 ~ 80 °C) drip. After the addition was completed, the mixture was further stirred for 10 minutes while boiling, and filtered while hot.The solution was orange-red, and after cooling, it was extracted three times with chloroform, and the organic phases were combined and dried over anhydrous magnesium sulfate.Filter and finally distill off the solvent under reduced pressure. The acetone is recrystallized to give a pale yellow needle crystal product.The yield was 23.5percent (1.08 g).It is prepared by using 1, 10-phenanthroline monohydrate as a raw material in an aqueous solution of potassium permanganate and potassium hydroxide. 1, 10-phenanthroline monohydrate (5 g, 25.22 mmol) and potassium hydroxide (2.8 g, 49.91 mmol) were dissolved in 200 mL of distilled water and heated to 100 ° C under elevated temperature. Potassium permanganate (12.8 g, 80.99 mmol) was dissolved in 200 mL of distilled water, dissolved by heating, and slowly added dropwise to the above mixture over 1 hour, and the reaction was continued at 100 ° C for 2.5 h, and filtered while hot. After the filtrate was cooled, the pH was adjusted to 8-9 with 10percent hydrochloric acid and then extracted with dichloromethane (3×200mL), dried over anhydrous sodium sulfate and filtered. Concentrated organic phase, Silica gel column chromatography (dichloromethane as mobile phase)Purification to give a yellow-white solid a;Step 2; To a 1 L one-necked flask was added a mixture of 30 g (0.13 mol, 68percent) 5-nitro-1, 10-phenanthroline, 51 g (0.61 mol) potassium oxalate, 12.5percent NaOHIn a 5L three-neck flask, add phenanthroline (45g, 0.25mol) and freshly prepared potassium hydroxide solution (2.5L, 0.35 M), stirring, heated to reflux. Dissolve 118.5g of potassium permanganate in 400mL of water. After heating and dissolving, use constant pressure dripping solution to drain. The funnel was added to the reaction mixture to control the dropping rate. The dropping was completed in about 4 h and the reflux reaction was continued for 5 h. Hot filter, wash cake, get Go to the orange filtrate, allow to cool to room temperature, extract with dichloromethane (3 x 20 mL), combine the extracts, dry with anhydrous Na2SO4 Dry and vortex to concentrate a light yellow solid, which is finally recrystallized from methanol and dried under vacuum to give yellow needles (Compound 1). (20.0 g, 0.11 mol), yield 44.0percent.
Computed Properties
Molecular Weight:182.18
XLogP3:1
Hydrogen Bond Acceptor Count:3
Exact Mass:182.048012819
Monoisotopic Mass:182.048012819
Topological Polar Surface Area:42.8
Heavy Atom Count:14
Complexity:230
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 4,5-DIAZAFLUOREN-9-ONE
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensedTrader Supplier of PVC resin,pvc paste resin,melamineInquiryCAS No.: 50890-67-0Grade: Industrial GradeContent: 99%
Learn More Other Chemicals
-
2-Bromophenacyl bromide, 90%
49851-55-0
-
1H-Indazol-7-ol
81382-46-9
-
6-Chloro-4-forMyl-nicotinic acid
1031433-06-3
-
3-Hydroxy-2,4,5-trifluorobenzoic acid Formula
116751-24-7
-
2-Methyl-1-heptene Formula
15870-10-7
-
1-(3,5-Dinitrophenyl)ethanone Formula
14401-75-3
-
α-Amino-3-bromobenzeneacetic acid Structure
79422-73-4
-
6-(BROMOMETHYL)-1,3-BENZOTHIAZOLE,97% Structure
499770-85-3
-
What is Allyl methacrylate
96-05-9
-
What is ethyl 5-hydroxy-2-Methylnicotinate
60390-47-8