Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide structure

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide 

structure
  • CAS No:

    35948-25-5

  • Formula:

    C12H9O2P

  • Chemical Name:

    9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide

  • Synonyms:

    6H-Dibenz[c,e][1,2]oxaphosphorin,6-oxide;3,4:5,6-Dibenzo-2H-1,2-oxaphosphorin-2-oxide;9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide;HCA (heat stabilizer);HCA;Hiretar 101;9,10-Dihydro-9-oxa-10-phosphaphenanthren 10-oxide;Sanko HCA;DOPO;9,10-Dihydro-9-oxa-10-phosphorylphenanthrene 10-oxide;Ukanol DOPO;Ukanol GKF;Epoclean;Struktol Polydis 3710;Polydis 3710;KFR-DOPO;Chemguard DOPO;Polyphlox 3742;DOP 11S25;62281-13-4;77921-21-2;99208-51-2;134767-33-2;225505-41-9;460088-16-8

  • Categories:

    Catalyst and Auxiliary  >  Flame Retardants

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide Basic Attributes

216.17200

216.17

252-813-7

2934999090

Characteristics

49.77000

2.5

119-121 °C

399.658ºC at 760 mmHg

206.441ºC

Safety Information

R36/37/38

S26; S36/37/39

P261, P264, P272, P280, P302+P352, P305+P351+P338, P321, P332+P313, P333+P313, P337+P313, P362, P363, P501

H315

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide Use and Manufacturing

Methods of Manufacturing

10 g of 6-chloro-6H-dibenz[c, e][1, 2]oxaphosphorin (0.0426 moles), 1.2 g hydrochloric acid (0.0335 moles) and 2.1 g of water were introduced into a reacting chamber and stirred for 5 minutes to form a solution. 1. Synthesis of DOPO; Add one mole of CDOP with a 500 milliliter toluene into a reactor. Add one mole of water (about 18 g) by dropping for about one hour. The condenser uses water for cooling. The hydrochloric acid vapor is lead to the neutralization sink by going through the ventilated tube which connects to the top of the condenser. When the dropping is finished, reflux it for an hour. Then introduce the nitrogen into the solution, reflux it for another 2 hours for blowing out the remaining hydrochloric acid vapor. After return to room temperature, white solid DOPO precipitates. The yield is about 95percent after filtering and dying.HPPA and 1g of p-toluenesulfonic acid was added to 150mL of toluene, heated to reflux with water, kept 4 hours after steaming 100mL of toluene.After cooling the remaining solution precipitated a large amount of white solid, filtered and dried to give 31.6g of DOPO with a total yield of 97.5percent and a purity of 96.1percent.

Uses

9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-Oxide

Computed Properties

Molecular Weight:216.17
XLogP3:2.5
Hydrogen Bond Acceptor Count:2
Exact Mass:216.03401652
Monoisotopic Mass:216.03401652
Topological Polar Surface Area:26.3
Heavy Atom Count:15
Complexity:266
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Downstream Products

Recommended Suppliers of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.