2,6-Dichlorobenzaldehyde
-
2,6-Dichlorobenzaldehyde
structure -
-
CAS No:
83-38-5
-
Formula:
C7H4Cl2O
-
Chemical Name:
2,6-Dichlorobenzaldehyde
-
Synonyms:
Benzaldehyde,2,6-dichloro-;2,6-Dichlorobenzaldehyde;o,o′-Dichlorobenzaldehyde;NSC 7193
- Categories:
-
CAS No:
Description
white to light yellow powder
Yellowish flakes or fine off-white powder. Pungent odor. (NTP, 1992)
Yellowish flakes or fine off-white powder. Pungent odor. (NTP, 1992)
2,6-Dichlorobenzaldehyde Basic Attributes
175.008
175.01
201-472-2
781ADM5611
7193
1759
DTXSID5024970
2913000090
Characteristics
17.1
2.6
Yellowish flakes or fine off-white powder. Pungent odor. (NTP, 1992)
1.4±0.1 g/cm3
71.5 °C
71 °C
275° F (NTP, 1992)
1.601
H2O: <0.1 g/100 mL at 23 ºC
Store in a cool, dry place. Keep container closed when not in use.
Sensitive to air, moisture and light. Insoluble in water.
Aldehydes
2,6-DICHLOROBENZALDEHYDE is incompatible with strong oxidizers and strong bases. It may also be incompatible with iron. (NTP, 1992)
Safety Information
III
8
UN 3261 8/PG 2
2
R36/37/38
S26-S27-S28-S36/37/39-S45-S37/39
Xi:Irritant
Stable. Incompatible with strong oxidizing agents, strong bases. Air, light and moisture sensitive.
P280-P305 + P351 + P338-P310
H314
This chemical is combustible. (NTP, 1992)
|Danger|H314 (92.16%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, and P501|Aggregated GHS information provided by 51 companies from 6 notifications to the ECHA C&L Inventory.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves. RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms of exposure to this compound are eye, skin and upper respiratory tract irritation. Other symptoms of exposure may include a burning sensation, destruction of the mucous membranes, upper respiratory tract, eyes, and skin; coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting. Inhalation may be fatal as a result of spasm, inflammation of the larynx and bronchi, chemical pneumonitis and pulmonary edema. ACUTE/CHRONIC HAZARDS: This material is corrosive to the mucous membranes, upper respiratory tract, eyes and skin. It is harmful if ingested, inhaled or absorbed through the skin. When heated to decomposition it may emit toxic fumes of carbon monoxide, carbon dioxide and hydrogen chloride. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital. (NTP, 1992)
2,6-Dichlorobenzaldehyde Use and Manufacturing
An intermediate in the synthesis of substituted (2,6-dichlorobenzylideneamino)guanidines and some hydrazone derivatives of C-cyanoformamidrazone. It
Benzaldehyde, 2,6-dichloro-: ACTIVE
Computed Properties
Molecular Weight:175.01
XLogP3:2.6
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:1
Exact Mass:173.9639201
Monoisotopic Mass:173.9639201
Topological Polar Surface Area:17.1
Heavy Atom Count:10
Complexity:117
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 2,6-Dichlorobenzaldehyde
-
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of chemicals -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of D-Biotin,Tobramycin base,L(-)-Carnitine base,Polymyxin B sulfate USP,Kanamycin sulfate monohydrate,Finasteride 99% USP -
CN
3 YRS
Business licensedTrader Supplier of CHEMICALS,REAGENTSInquiryCAS No.: 83-38-5Grade: Pharmaceutical GradeContent: 99%
Learn More Other Chemicals
-
[3-(2,6-DICHLOROPHENYL)-ISOTHIAZOL-4-YL]-CARBAMOYL 2,6-DICHLOROBENZALDEHYDE OXIME
832113-70-9
-
2,6-dichlorobenzaldehyde [4-(2-bromo-4-methylanilino)-6-(4-morpholinyl)-1,3,5-triazin-2-yl]hydrazone
328242-94-0
-
2,6-dichlorobenzaldehyde (4-methyl-6-phenyl-2-pyrimidinyl)hydrazone
123024-07-7
-
CyclopentylAcetaldehyde Formula
5623-81-4
-
(E)-2-Pentenal Formula
1576-87-0
-
5-BROMO-3-FLUOROSALICYLALDEHYDE Formula
251300-28-4
-
Methyl eicosanoate Structure
1120-28-1
-
Benzenesulfonamide,4-[[1-(azidomethyl)-2-(phenylthio)ethyl]amino]-3-nitro- Structure
406235-11-8
-
What is Ferrocene
102-54-5
-
What is 4-Methylsulphonylbenzaldehyde
5398-77-6