Pentabromochlorocyclohexane
-
Pentabromochlorocyclohexane
structure -
-
CAS No:
87-84-3
-
Formula:
C6H6Br5Cl
-
Chemical Name:
Pentabromochlorocyclohexane
-
Synonyms:
Cyclohexane,1,2,3,4,5-pentabromo-6-chloro-;1,2,3,4,5-Pentabromo-6-chlorocyclohexane;Pentabromochlorocyclohexane;Chloropentabromocyclohexane;FR 651A;FR 651P;25495-99-2
-
CAS No:
Description
PHYSICAL DESCRIPTION: White solid. (NTP, 1992)
Pentabromochlorocyclohexane is a white solid. (NTP, 1992)
Pentabromochlorocyclohexane is a white solid. (NTP, 1992)
Pentabromochlorocyclohexane Basic Attributes
513.08500
513.08
201-776-5
9764W0YF98
2811
DTXSID4025828
2903890090
Characteristics
0
4.42490
Pentabromochlorocyclohexane is a white solid. (NTP, 1992)
2.706g/cm3
199 °C
338.048ºC at 760 mmHg
190.556ºC
1.676
less than 0.1 mg/mL at 64° F (NTP, 1992)
Insoluble in water.
Halogenated Organic Compounds
Halogenated aliphatic compounds, such as PENTABROMOCHLOROCYCLOHEXANE, are moderately or very reactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Materials in this group are incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.
Safety Information
2811
Flash point data for this chemical are not available; however, it is probably nonflammable. (NTP, 1992)
Fires involving this compound may be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then dampen the solid spill material with toluene, then transfer the dampened material to a suitable container. Use absorbent paper dampened with toluene to pick up any remaining material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash all contaminated surfaces with toluene followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
0.49 Days
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Pentabromochlorocyclohexane Use and Manufacturing
Cyclohexane, 1,2,3,4,5-pentabromo-6-chloro-: ACTIVE|TP - indicates a substance that is the subject of a proposed TSCA section 4 test rule.