Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Dimethyl-o-toluidine

Dimethyl-o-toluidine

Dimethyl-o-toluidine structure

Dimethyl-o-toluidine 

structure
  • CAS No:

    609-72-3

  • Formula:

    C9H13N

  • Chemical Name:

    Dimethyl-o-toluidine

  • Synonyms:

    Benzenamine,N,N,2-trimethyl-;o-Toluidine,N,N-dimethyl-;N,N,2-Trimethylbenzenamine;N,N-Dimethyl-o-toluidine;N,N,2-Trimethylaniline;N,N-Dimethyl-2-methylaniline;o-Methyldimethylaniline;Dimethyl-o-toluidine;2-Methyl-N,N-dimethylaniline;o-Methyl-N,N-dimethylaniline;N,N-Dimethyl-o-methylaniline;2,N,N-Trimethylaniline;NSC 1784

  • Categories:

    Organic Chemistry  >  Amides

Description

clear colorless to amber liquid


N,N-Dimethyl-o-toluidine is a building block that has been used as an epoxy catalyst for curing Epon 828. (CAS 25068-38-6).


N,n-dimethyl-o-toluidine appears as a clear colorless liquid with an aromatic odor. Less dense than water and insoluble in water. Hence floats on water. May be toxic by skin absorption and inhalation. May release toxic vapors when burned.


N,n-dimethyl-o-toluidine appears as a clear colorless liquid with an aromatic odor. Less dense than water and insoluble in water. Hence floats on water. May be toxic by skin absorption and inhalation. May release toxic vapors when burned.

Dimethyl-o-toluidine Basic Attributes

135.21

135.21

210-199-8

56PT61F2XE

1784

2810

DTXSID8052279

2921430090

Characteristics

3.2

2.61

Clear colorless to amber Liquid

0.9252-0.9261 g/cm3 @ Temp: 20.6 °C

-60 °C

194.1 °C

145 °F

1.544

Solubility in water: none

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

0.86 mmHg

Relative vapour density (air = 1): 4.7

Tends to darken upon exposure to air. Insoluble in water.

Amines, Aromatic

N,N-DIMETHYL-O-TOLUIDINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. generates hydrogen, a flammable gas, in combination with strong reducing agents, such as hydrides.

Safety Information

II

6.1(a)

UN 2810 6.1/PG 2

1

23/24/25-33-36/37/38-52/53

23-26-36/37/39-45-61-36/37-28A-28

XU5800000

T

Separated from oxidants and food and feedstuffs.

Stable at room temperature in closed containers under normal storage and handling conditions.

P261-P273-P280-P301 + P310-P311

H301-H311-H331-H373-H412

UN 2810

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2016)

|Danger|H301 (99.46%): Toxic if swallowed [Danger Acute toxicity, oral]|P260, P261, P264, P270, P271, P273, P280, P301+P310, P302+P352, P304+P340, P311, P312, P314, P321, P322, P330, P361, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 185 companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H301: Toxic if swallowed [Danger Acute toxicity, oral]

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: SMALL FIRE: Dry chemical, CO2 or water spray. LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

Dimethyl-o-toluidine Use and Manufacturing

Uses

For organic synthesis

Benzenamine, N,N,2-trimethyl-: ACTIVE

Analysis Methods

Name Column Shape Active Phase(℃) Retention index Temperature Control Method Comments Reference
Van Den Dool and Kratz RI, non-polar column, temperature ramp Capillary OV-1 1164.6 temperature ramp 8. K/min; Tstart: 35. C; Tend: 300. C Gautzsch, R.Zinn, P.Use of incremental models to estimate the retention indexes of aromatic compoundsChromatographia1996, 43, 3/4, 163-176.

Computed Properties

Molecular Weight:135.21
XLogP3:2.9
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:1
Exact Mass:135.104799419
Monoisotopic Mass:135.104799419
Topological Polar Surface Area:3.2
Heavy Atom Count:10
Complexity:98.9
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Dimethyl-o-toluidine

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.