Glycol diformate
-
Glycol diformate
structure -
-
CAS No:
629-15-2
-
Formula:
C4H6O4
-
Chemical Name:
Glycol diformate
-
Synonyms:
1,2-Ethanediol,1,2-diformate;Ethylene glycol,diformate;1,2-Ethanediol,diformate;Ethylene formate;Glycol diformate;Ethylene diformate;NSC 8831;1,2-Diformyloxyethane;2-(Formyloxy)ethyl formate
- Categories:
-
CAS No:
Description
Water-white liquid. hydrolyzes slowly, liberating formic acid. Soluble in water, alcohol and ether. Combustible.
Ethylene glycol diformate appears as a water-white liquid. More dense than water. May be toxic by ingestion. Used in embalming fluids.|Liquid
Ethylene glycol diformate appears as a water-white liquid. More dense than water. May be toxic by ingestion. Used in embalming fluids.
Characteristics
52.6
0.60420
Ethylene glycol diformate appears as a water-white liquid. More dense than water. May be toxic by ingestion. Used in embalming fluids.
1.1503 g/cm3 @ Temp: 20 °C
174 °C
200° F (NFPA, 2010)
n20/D 1.415
Soluble in water.
Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
ETHYLENE GLYCOL DIFORMATE reacts exothermically with acids. With strong oxidizing acids; the heat may ignite the reaction products. Also reacts exothermically with basic solutions. Generates hydrogen with with strong reducing agents (alkali metals, hydrides).
Safety Information
1993
3
22-41
26-36
KW5250000
Xn
P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P340, P305+P351+P338, P310, P312, P321, P330, P332+P313, P337+P313, P362, P403+P233, P405, P501
H302
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. Substance may be transported hot. For hybrid vehicles, ERG Guide 147 (lithium ion batteries) or ERG Guide 138 (sodium batteries) should also be consulted. If molten aluminum is involved, refer to ERG Guide 169. (ERG, 2016)
|Danger|H302 (84.06%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P280, P301+P312, P302+P352, P305+P351+P338, P310, P321, P330, P332+P313, P337+P313, P362, and P501|Aggregated GHS information provided by 146 companies from 11 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective. SMALL FIRE: Dry chemical, CO2, water spray or regular foam. LARGE FIRE: Water spray, fog or regular foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)
Drug Information
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. (ERG, 2016)
1,2-ethanediol diformate
Glycol diformate Use and Manufacturing
Embalming fluids.
Finishing agents
Fabric, textile, and leather products not covered elsewhere
100,000 - 500,000 lb
Petrochemical manufacturing|1,2-Ethanediol, 1,2-diformate: ACTIVE
Computed Properties
Molecular Weight:118.09
Hydrogen Bond Acceptor Count:4
Rotatable Bond Count:5
Exact Mass:118.02660867
Monoisotopic Mass:118.02660867
Topological Polar Surface Area:52.6
Heavy Atom Count:8
Complexity:60.4
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of Glycol diformate
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
4 YRS
Business licensedTrader Supplier of 6-Amino-1,3-Dimethyluracil,Ethylene glycol diformate,Sodium cumenesulfonate -
CN
4 YRS
Business licensed Certified factoryManufactory Supplier of Flavors & Fragrances,Catalyst & Auxiliary,Intermediates,Dyes & Pigments,Inorganic Chemistry,petro chemicals,Surfactant,Food Additives,Water Treatment Chemicals
Learn More Other Chemicals
-
Polyethylene glycol octyl ether acid phosphate
31800-88-1
-
Carboxymethyl polyethylene glycol oleyl ether
57635-48-0
-
Aniline,4,4′-methylenedi-,polymer with 1,2,4-benzenetricarboxylic acid cyclic 1,2-anhydride,dimethyl terephthalate,ethylene glycol and 1,3,5-tris(2-hydroxyethyl)-s-triazine-2,4,6(1H,3H,5H)-trione
25950-45-2
-
Urea, reaction products with ethylene glycol and ethylene oxide Formula
78355-52-9
-
Phosphoric acid, mixed esters with 2-ethyl-1-hexanol and polyethylene glycol monotridecyl ether Formula
68937-44-0
-
Benzenesulfonic acid, dodecyl-, compds. with ammonia-ethylene glycol reaction product morpholine derivs. residues Formula
68955-71-5
-
Octadecanoic acid, mixed esters with myristic acid and neopentyl glycol Structure
68585-01-3
-
(3-BROMOMETHYLPHENYL)BORONIC ACID NEOPENTYL GLYCOL ESTER Structure
143805-78-1
-
What is Methoxypolyethylene glycol succinimidyl succinate
78274-32-5
-
What is Diethylene glycol monoisobutyl ether
18912-80-6