Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Tetradecyldimethylamine

Tetradecyldimethylamine

Tetradecyldimethylamine structure

Tetradecyldimethylamine 

structure
  • CAS No:

    112-75-4

  • Formula:

    C16H35N

  • Chemical Name:

    Tetradecyldimethylamine

  • Synonyms:

    1-Tetradecanamine,N,N-dimethyl-;Tetradecylamine,N,N-dimethyl-;N,N-Dimethyl-1-tetradecanamine;N,N-Dimethyl-N-tetradecylamine;Dimethyltetradecylamine;Tetradecyldimethylamine;N,N-Dimethylmyristylamine;Myristyldimethylamine;Armeen DM 14D;Dimethylmyristamine;N,N-Dimethyltetradecylamine;Dimethylmyristylamine;Genamin 14R302D;IPL 30;Adma 14;N-Tetradecyldimethylamine;NSC 78319;Farmin DM 4098;AT 1495;Nissan Tertiary Amine MB;N,N-Dimethyl-1-tetradecylamine;Lipomin DM 14D

  • Categories:

    Cosmetic Ingredient  >  Antistatic

Description

LiquidA liquidcationic detergent; acid stable.A light yellow liquid with a fishlike odor. Insoluble in water and less dense than water. Hence floats on water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation or skin absorption. Used to make other chemicals.


Dimethyltetradecanamine appears as a light yellow liquid with a fishlike odor. Insoluble in water and less dense than water. Hence floats on water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation or skin absorption. Used to make other chemicals.|Liquid


Dimethyltetradecanamine appears as a light yellow liquid with a fishlike odor. Insoluble in water and less dense than water. Hence floats on water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation or skin absorption. Used to make other chemicals.

Tetradecyldimethylamine Basic Attributes

241.46

241.46

204-002-4

5E4O85D8T2

78319

2735

DTXSID4026927

LIQUID

2921199090

Characteristics

3.24000

5.24910

Dimethyltetradecanamine appears as a light yellow liquid with a fishlike odor. Insoluble in water and less dense than water. Hence floats on water. Contact may irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation or skin absorption. Used to make other chemicals.

0.795 g/mL at 20 °C(lit.)

-3°C

115-125 °C @ Press: 0.06-0.07 Torr

131 °C

n 20/D 1.441

Insoluble in water.

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

0.00147mmHg at 25°C

Insoluble in water.

Amines, Phosphines, and Pyridines

DIMETHYLTETRADECANAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Safety Information

III

8

UN 2735 8/PG 3

3

R22;R34

26-36/37/39-45

C

ACID-STABLE

P280-P305 + P351 + P338-P310

H302-H314

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2016)

|Danger|H302 (99.51%): Harmful if swallowed [Warning Acute toxicity, oral]|P260, P264, P270, P273, P280, P301+P312, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P330, P363, P391, P405, and P501|Aggregated GHS information provided by 479 companies from 15 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.|H302: Harmful if swallowed [Warning Acute toxicity, oral]|P260, P261, P264, P270, P271, P280, P301+P312, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P330, P363, P403+P233, P405, and P501|H317: May cause an allergic skin reaction [Warning Sensitization, Skin]|P201, P202, P260, P261, P264, P270, P271, P272, P280, P281, P284, P285, P302+P352, P304+P340, P304+P341, P305+P351+P338, P307+P311, P308+P313, P310, P314, P320, P321, P333+P313, P337+P313, P342+P311, P363, P403+P233, P405, and P501

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: SMALL FIRE: Dry chemical, CO2 or water spray. LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)

Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

Tetradecyldimethylamine Use and Manufacturing

Uses

Barlene(R) tertiary amines are used as chemical intermediates for the manufacture of quaternary ammonium compounds, amine oxide and betaine surfactants


Intermediates

Production

10,000,000 - 50,000,000 lb

All other basic organic chemical manufacturing|1-Tetradecanamine, N,N-dimethyl-: ACTIVE

Cosmetics -> Antistatic; Hair conditioning

Computed Properties

Molecular Weight:241.46
XLogP3:6.9
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:13
Exact Mass:241.276950121
Monoisotopic Mass:241.276950121
Topological Polar Surface Area:3.2
Heavy Atom Count:17
Complexity:132
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Tetradecyldimethylamine

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.