Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 3,4-Dihydro-2H-pyran-2-carboxaldehyde

3,4-Dihydro-2H-pyran-2-carboxaldehyde

3,4-Dihydro-2H-pyran-2-carboxaldehyde structure

3,4-Dihydro-2H-pyran-2-carboxaldehyde 

structure
  • CAS No:

    100-73-2

  • Formula:

    C6H8O2

  • Chemical Name:

    3,4-Dihydro-2H-pyran-2-carboxaldehyde

  • Synonyms:

    2H-Pyran-2-carboxaldehyde,3,4-dihydro-;3,4-Dihydro-2H-pyran-2-carboxaldehyde;Acrolein dimer;2-Formyl-3,4-dihydro-2H-pyran;5-Hexenal,2,6-epoxy-;2-Propenal,dimer;3,4-Dihydro-2-formyl-2H-pyran;3,4-Dihydro-2H-pyran-2-aldehyde;NSC 95413;3,4-Dihydro-2H-pyran-2-carbaldehyde;102265-26-9;77890-80-3

  • Categories:

    Pharmaceutical Intermediates  >  Heterocyclic Compound

Description

Colorless viscous liquidA colorless or yellow liquid with a pungent disagreeable odor. Flash point 118°F. Density 1.077 g / cm3 (8.96 lb / gal). May be irritating to the eyes and mucous membranes; long-term exposure may result in adverse health effects. Vapors denser than air. Used to make other chemicals, plastics.


Acrolein dimer, stabilized appears as a colorless or yellow liquid with a pungent disagreeable odor. May be irritating to the eyes and mucous membranes; long-term exposure may result in adverse health effects. Vapors denser than air. Used to make other chemicals, plastics.


Acrolein dimer, stabilized appears as a colorless or yellow liquid with a pungent disagreeable odor. May be irritating to the eyes and mucous membranes; long-term exposure may result in adverse health effects. Vapors denser than air. Used to make other chemicals, plastics.

3,4-Dihydro-2H-pyran-2-carboxaldehyde Basic Attributes

112.13

112.13

202-884-5

95413

2607

DTXSID30274151

Characteristics

26.3

-0.17

Acrolein dimer, stabilized appears as a colorless or yellow liquid with a pungent disagreeable odor. May be irritating to the eyes and mucous membranes; long-term exposure may result in adverse health effects. Vapors denser than air. Used to make other chemicals, plastics.

1.1764 g/cm3 @ Temp: 20 °C

-130 °C

88 °C @ Press: 100 Torr

54 °C

n20/D1.466(lit.)

Flammable. soluble in water.

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

3.28mmHg at 25°C

Oral-rat LD50: 4920 mg/kg

combustible

Flammable. Soluble in water.

Aldehydes

Polymerizable

Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.

Safety Information

III

3.2

UN 2607

10-20/21/22-36/37/38-41

16-26-33-36/37/39-45

UP6825000

Xn

Treasury is ventilated, low temperature and dry; stored and transported separately from oxidant

Steam and air can be explosive when mixed

Polymerizes easily.

P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P310, P312, P321, P322, P332+P313, P362, P363, P370+P378, P403+P233, P403+P235, P405, P501

H226

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)|Flammable - 2nd degree, Reactive - 1st degree

|Danger|H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]|P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P310, P312, P321, P322, P332+P313, P362, P363, P370+P378, P403+P233, P403+P235, P405, and P501|Aggregated GHS information provided by 73 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. Do not use dry chemical extinguishers to control fires involving nitromethane (UN1261) or nitroethane (UN2842). LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Toxicity

moderately toxic

Drug Information

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 129P [Flammable Liquids (Water-Miscible / Noxious)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2016)

3,4-Dihydro-2H-pyran-2-carboxaldehyde Use and Manufacturing

2H-Pyran-2-carboxaldehyde, 3,4-dihydro-: ACTIVE|PMN - indicates a commenced PMN (Pre-Manufacture Notices) substance.

Fire Hazards -> Flammable - 2nd degree, Reactive - 1st degree

Computed Properties

Molecular Weight:112.13
XLogP3:0.7
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:112.052429494
Monoisotopic Mass:112.052429494
Topological Polar Surface Area:26.3
Heavy Atom Count:8
Complexity:107
Undefined Atom Stereocenter Count:1
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 3,4-Dihydro-2H-pyran-2-carboxaldehyde

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.