Piperazine adipate
-
Piperazine adipate
structure -
-
CAS No:
142-88-1
-
Formula:
C6H10O4.C4H10N2
-
Chemical Name:
Piperazine adipate
-
Synonyms:
Hexanedioic acid,compd. with piperazine (1:1);Adipic acid,compd. with piperazine (1:1);Piperazine,adipate (1:1);Piperazine,hexanedioate (1:1);Adiprazine;Arduvermin;Dietelmin;Entacyl;Helmirazin;Oxurasin;Oxyzin;Piperascat;Piperaskat;Piperazine adipate;Vermicompren;Piperazine adipinate;Nometan;Vermilass;Oxypaat;Pipadox;Adiprazina;Piperazinium adipate;NSC 74383;93505-75-0
- Categories:
-
CAS No:
Description
Piperazine adipate is a potent broad spectrum anthelmintic against many common worm infections in mammals.
Piperazine adipate appears as odorless white crystalline powder or solid. Slightly acid taste. Melting point 256-257°C. Dissolves slowly. pH (0.2-0.01 molar aqueous solutions) 5.45. pH (5% solution) 5 - 6. (NTP, 1992)
Piperazine adipate appears as odorless white crystalline powder or solid. Slightly acid taste. Melting point 256-257°C. Dissolves slowly. pH (0.2-0.01 molar aqueous solutions) 5.45. pH (5% solution) 5 - 6. (NTP, 1992)|Piperazine adipate is a piperazinium salt obtained by combining equimolar amounts of piperazine and adipic acid. It has a role as an anthelminthic drug and an antinematodal drug. It contains an adipate(2-) and a piperazinium(2+).
Piperazine adipate Basic Attributes
232.28
232.14200
205-569-0
V7P5P122LB
74383
DTXSID2059724
2933599090
Characteristics
98.66000
0.55280
Piperazine adipate appears as odorless white crystalline powder or solid. Slightly acid taste. Melting point 256-257°C. Dissolves slowly. pH (0.2-0.01 molar aqueous solutions) 5.45. pH (5% solution) 5 - 6. (NTP, 1992)
256-257 °C
338.5ºC at 760 mmHg
172.7ºC
H2O: almost transparency
Water soluble.
Salts, Acidic
PIPERAZINE ADIPATE gives weakly acidic aqueous solutions. Can serve as both an oxidizing agent and as a reducing agent.
Safety Information
NONH for all modes of transport
MO1955000
Stable. Combustible. Incompatible with strong oxidizing agents. May be light-sensitive.
P260, P261, P264, P271, P272, P273, P280, P285, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P304+P341, P305+P351+P338, P310, P312, P321, P332+P313, P333+P313, P337+P313, P342+P311, P362, P363, P403+P233, P405, P501
H314
Flash point data for this chemical are not available; however it is probably combustible. (NTP, 1992)
|Danger|H314 (50%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]|P260, P261, P264, P271, P272, P273, P280, P285, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P304+P341, P305+P351+P338, P310, P312, P321, P332+P313, P333+P313, P337+P313, P342+P311, P362, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 4 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this chemical can be controlled with a dry chemical, carbon dioxide, or Halon extinguisher. (NTP, 1992)
SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
SYMPTOMS: Symptoms of prolonged exposure to this chemical include dizziness, vomiting, blurred vision, muscular incoordination and paresthesia. ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes such as NOx. (NTP, 1992)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. If symptoms (such as redness or irritation) develop, immediately transport the victim to a hospital. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
piperazine adipate
Piperazine adipate Use and Manufacturing
It is used as an anthelmintic for humans and farm animals against intestinal roundworms and pinworms infection
Hexanedioic acid, compd. with piperazine (1:1): INACTIVE
Computed Properties
Molecular Weight:232.28
Hydrogen Bond Donor Count:4
Hydrogen Bond Acceptor Count:6
Rotatable Bond Count:5
Exact Mass:232.14230712
Monoisotopic Mass:232.14230712
Topological Polar Surface Area:98.7
Heavy Atom Count:16
Complexity:140
Covalently-Bonded Unit Count:2
Compound Is Canonicalized:Yes
Recommended Suppliers of Piperazine adipate
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives
Learn More Other Chemicals
-
1-Benzyl-4-(4-pyridinyl) piperazine
63980-43-8
-
1-Benzyl Piperazine HCL
72878-35-4
-
Decyl octyl adipate
110-29-2
-
Cyclohexanecarboxylic acid, 1,3,4,5-tetrahydroxy-, (1α,3α,4α,5β)-, compd. with piperazine Formula
59766-07-3
-
Methyl N-Succinimidyl Adipate Formula
118380-06-6
-
Benzamide, 5-chloro-N-(2-chloro-4-nitrophenyl)-2-hydroxy-, compd. with piperazine (1:?) Formula
34892-17-6
-
Piperazine phosphate Structure
14538-56-8
-
Piperazine citrate Structure
144-29-6
-
What is Diisononyl adipate
33703-08-1
-
What is Dihexyl adipate
110-33-8