Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Iron phosphide (Fe2P)

Iron phosphide (Fe2P)

Iron phosphide (Fe2P) structure

Iron phosphide (Fe2P) 

structure
  • CAS No:

    1310-43-6

  • Formula:

    Fe2P

  • Chemical Name:

    Iron phosphide (Fe2P)

  • Synonyms:

    Iron phosphide (Fe2P);Ferrous phosphide;Diiron phosphide;Diiron monophosphide;Ferrophos (pigment);Ferrophos;Ferrophos HRS 3095;Ferrophos HRS 3212;Ferrophos 31;168679-12-7;1392109-42-0

  • Categories:

    Inorganic Chemistry  >  Inorganic Salts

Description

DryPowder


DryPowder

Iron phosphide (Fe2P) Basic Attributes

142.66

143.85100

215-178-7

Gray, hexagonal needles or blue-gray powder

Characteristics

34.14000

0.58850

DryPowder

5.7 g/cm3

1420 °C

insoluble H2O, dilute acid, dilute alkali; reacts with hot mineral acids

Ferromagnetic. Reacts with hot mineral acids.

Safety Information

NONH for all modes of transport

36/37/38

26-36/37

Xi

P261-P305 + P351 + P338

H315-H319-H335

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Evolves toxic ... products on exposure to moisture or acids.|Reacts with hot mineral acids.

|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 210 companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Evolves ... flammable products on exposure to moisture or acids.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.|All ... /iron/ preparations should be kept in child-proof bottles. /Iron preparations/

If inhaled, iron is a local irritant to the lung and gastrointestinal tract. /Iron compounds/

Drug Information

Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. /Iron and related compounds/|Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious. Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start an IV with lactated Ringer's /SRP: "To keep open", minimal flow rate/. Watch for signs of fluid overload. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Iron and related compounds/|Maintain an open airway and assist ventilation if necessary. Treat shock caused by hemorrhagic gastrointestinitis aggressively with intravenous crystalloid fluids, and replace blood if needed. Patients are often markedly hypovolemic owing to gastrointestinal losses and third spacing of fluids into the intestinal wall and interstitial space. Treat coma, seizures, and metabolic acidosis if they occur. For seriously intoxicated victims (eg, shock, severe acidosis, and/or serum iron > 500-600 mcg/dL) administer deferoxamine. Monitor the urine for the urine for the characteristic orange or pink deferoxamine-iron complex. Therapy may be stopped when the urine returns to normal or when the serum iron level decreases to the normal range. Prolonged deferoxamine has been associated with adult respiratory distress syndrome and Yersinia sepsis.|Activated charcoal is not effective. Ipecac is not recommended, because it can aggravate iron-induced gastrointestinal irritation and interfere with whole bowel irrigation. Consider gastric lavage if product was a liquid formulation or tablets were chewed. Do-not use phosphate-containing solutions for lavage; these may result in life-threatening hypernatremia, hyperphosphatemia, and hypocalcemia. Bicarbonate and deferoxamine lavage are of doubtful efficacy. Deferoxamine lavage is not effective and may enhance iron absorption. Whole-bowel irrigation is very effective for ingested tablets and may be considered first-line treatment, especially if large numbers of tablets are visible on plain abdominal x-ray. Massive ingestions may lead to concretions or bezoars. Repeated or prolonged whole-bowel irrigation may remove tablets. Endoscopy or surgical gastrotomy is rarely required.|Hemodialysis and hemoperfusion are not effective for removing iron but may be necessary to remove iron-deferoxamine complex in patients with renal failure. Exchange transfusion is occasionally used for massive pediatric ingestions but is of questionable efficacy.

Iron phosphide (Fe2P) Use and Manufacturing

Methods of Manufacturing

The phosphides are usually made by direct combination of the elements at elevated temperature. The reactive phosphorus is typically red phosphorus, white phosphorus, or phosphorus vapor. ... Diiron phosphide ... /is/ made in this manner.

Uses

Part Composition - Valve guide


Metal products not covered elsewhere

Production

25,000 - 100,000 lb

Grade: 24-26% phosphorus

Fabricated metal product manufacturing|Iron phosphide (Fe2P): ACTIVE

Computed Properties

Molecular Weight:142.66
Exact Mass:142.843633
Monoisotopic Mass:142.843633
Heavy Atom Count:3
Complexity:40.8
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Iron phosphide (Fe2P)

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.