Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Akardite II

Akardite II

Akardite II structure

Akardite II 

structure
  • CAS No:

    13114-72-2

  • Formula:

    C14H14N2O

  • Chemical Name:

    Akardite II

  • Synonyms:

    Urea,N′-methyl-N,N-diphenyl-;Urea,3-methyl-1,1-diphenyl-;N′-Methyl-N,N-diphenylurea;Acardite II;Akardite II;Akardit II;N-Methyl-N′,N′-diphenylurea;Acardit II;3-Methyl-1,1-diphenyl-urea

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

Description

PHYSICAL DESCRIPTION: Needles or grayish-white powder. (NTP, 1992)


1-methyl-3,3-diphenylurea appears as needles or grayish-white powder. (NTP, 1992)


1-methyl-3,3-diphenylurea appears as needles or grayish-white powder. (NTP, 1992)

Akardite II Basic Attributes

226.27

226.27

236-039-7

NR12XN9HWN

DTXSID8025593

2924299090

Characteristics

32.3

2.5

1-methyl-3,3-diphenylurea appears as needles or grayish-white powder. (NTP, 1992)

1.2±0.1 g/cm3

173 °C

397 to 401° F at 760 mm Hg (decomposes) (NTP, 1992)

203.5±21.2 °C

1.615

less than 1 mg/mL at 70° F (NTP, 1992)

5E-07mmHg at 25°C

Insoluble in water.

Amides and Imides

1-METHYL-3,3-DIPHENYLUREA is an amide. Amides/imides react with azo and diazo compounds to generate toxic gases. Flammable gases are formed by the reaction of organic amides/imides with strong reducing agents. Amides are very weak bases (weaker than water). Imides are less basic yet and in fact react with strong bases to form salts. That is, they can react as acids. Mixing amides with dehydrating agents such as P2O5 or SOCl2 generates the corresponding nitrile. The combustion of these compounds generates mixed oxides of nitrogen (NOx).

Safety Information

NONH for all modes of transport

3

S36/37

P264, P280, P305+P351+P338, P33, P313

H319

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

|Warning|H319 (97.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]|P264, P280, P305+P351+P338, and P337+P313|Aggregated GHS information provided by 43 companies from 3 notifications to the ECHA C&L Inventory.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material in a refrigerator. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Akardite II Use and Manufacturing

Urea, N'-methyl-N,N-diphenyl-: ACTIVE

Computed Properties

Molecular Weight:226.27
XLogP3:2.5
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:1
Rotatable Bond Count:2
Exact Mass:226.110613074
Monoisotopic Mass:226.110613074
Topological Polar Surface Area:32.3
Heavy Atom Count:17
Complexity:225
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Akardite II

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.