Product
Supplier
Encyclopedia
Inquiry
Home > Chemical CAS No.1 > Ferbam SDS

Ferbam Safety Data Sheets

SAFETY DATA SHEETS

According to the UN GHS revision 8

Version: 1.0

Creation Date: July 15, 2019

Revision Date: July 15, 2019

SECTION 1: Identification

1.1 GHS Product identifier

Product name

Ferbam

1.2 Other means of identification

Product number

-

Other names

Aaferzimag; Ferric Dimethyldithiocarbamate; N,N-dimethylcarbamodithioate,iron(3+)

1.3 Recommended use of the chemical and restrictions on use

Identified uses

Industrial and scientific research uses.

Uses advised against

no data available

1.4 Supplier's details

Company

Echemi.com

Address

Echemi.com

Telephone

Echemi.com

1.5 Emergency phone number

Emergency phone number

Echemi.com

Service hours

Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

SECTION 2: Hazard identification

2.1 Classification of the substance or mixture

Skin irritation, Category 2

Eye irritation, Category 2

Specific target organ toxicity – single exposure, Category 3

Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1

Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Warning

Hazard statement(s)

H315 Causes skin irritation

H319 Causes serious eye irritation

H335 May cause respiratory irritation

H410 Very toxic to aquatic life with long lasting effects

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.

P273 Avoid release to the environment.

Response

P302+P352 IF ON SKIN: Wash with plenty of water/...

P321 Specific treatment (see ... on this label).

P332+P317 If skin irritation occurs: Get medical help.

P362+P364 Take off contaminated clothing and wash it before reuse.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P319 Get medical help if you feel unwell.

P391 Collect spillage.

Storage

P403+P233 Store in a well-ventilated place. Keep container tightly closed.

P405 Store locked up.

Disposal

P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

2.3 Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Ferbam Ferbam 14484-64-1 238-484-2 100%

SECTION 4: First-aid measures

4.1 Description of necessary first-aid measures

If inhaled

Fresh air, rest. Refer for medical attention.

Following skin contact

Remove contaminated clothes. Rinse and then wash skin with water and soap.

Following eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Following ingestion

Induce vomiting (ONLY IN CONSCIOUS PERSONS!). Refer for medical attention .

4.2 Most important symptoms/effects, acute and delayed

Exposure Routes: inhalation, ingestion, skin and/or eye contact Symptoms: Irritation eyes, respiratory tract; dermatitis; gastrointestinal disturbance Target Organs: Eyes, skin, respiratory system, gastrointestinal tract (NIOSH, 2016)

4.3 Indication of immediate medical attention and special treatment needed, if necessary

Wash contaminating chemical from skin and hair with soap and water. Persons sensitive to thiram (rubber-sensitive) should be permanently removed from contact with compounds of this nature. Flush contaminant from eyes with fresh water for 10-15 minutes. If thiram or metallo dithiocarbamate compounds have been ingested: a) if vigorous emesis has not already occurred and victim is fully alert, give syrup of ipecac, followed by 1-2 glasses of water to induce vomiting (adults, 12 yr and older: 30 mL; children under 12: 15 mL). If consciousness level declines or vomiting has not occurred in 15 minutes, empty the stomach by intubation, aspiration, and lavage. Dithiocarbamates and Thiocarbamates

SECTION 5: Fire-fighting measures

5.1 Suitable extinguishing media

Use/ water spray, powder.

5.2 Specific hazards arising from the chemical

Excerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]: Some may burn but none ignite readily. Containers may explode when heated. Some may be transported hot. For UN3508, be aware of possible short circuiting as this product is transported in a charged state. (ERG, 2016)

5.3 Special protective actions for fire-fighters

Use water spray, powder.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered sealable containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.

6.2 Environmental precautions

Sweep spilled substance into covered sealable containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. Personal protection: particulate filter respirator adapted to the airborne concentration of the substance.

6.3 Methods and materials for containment and cleaning up

Ventilate area of spill. Collect spilled material in the most convenient and safe manner and deposit in sealed containers for reclamation, or for disposal in a secured sanitary landfill. Liquid containing ferbam should be absorbed in vermiculite, dry sand, earth, or a similar material.

SECTION 7: Handling and storage

7.1 Precautions for safe handling

NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

7.2 Conditions for safe storage, including any incompatibilities

Separated from strong oxidants, copper compounds, mercury compounds, alkaline materials and food and feedstuffs. Dry. Well closed.Store in cool, dry, well-ventilated, secure area out of reach of children and animals.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

TLV: (inhalable fraction): 5 mg/m3, as TWA; A4 (not classifiable as a human carcinogen)

Biological limit values

no data available

8.2 Appropriate engineering controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Wear safety spectacles.

Skin protection

Protective gloves. Protective clothing.

Respiratory protection

Use local exhaust or breathing protection.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties and safety characteristics

Physical state

Ferbam is a dark brown to black odorless solid. Used as a fungicide. (NIOSH, 2016)

Colour

Black or dark-colored fluffy powder

Odour

Odorless

Melting point/freezing point

66°C(lit.)

Boiling point or initial boiling point and boiling range

98°C/19mmHg(lit.)

Flammability

Combustible Solid

Lower and upper explosion limit/flammability limit

no data available

Flash point

9°C(lit.)

Auto-ignition temperature

no data available

Decomposition temperature

180°C

pH

pH = 5.0

Kinematic viscosity

no data available

Solubility

0.01 % (NIOSH, 2016)

Partition coefficient n-octanol/water

log Kow = -1.60

Vapour pressure

0 mm Hg (approx) (NIOSH, 2016)

Density and/or relative density

approx 0.6 kg/L

Relative vapour density

no data available

Particle characteristics

no data available

SECTION 10: Stability and reactivity

10.1 Reactivity

Decomposes on heating and on contact with moisture. This produces toxic and flammable gases. Reacts with strong oxidants.

10.2 Chemical stability

Tends to decompose on prolonged storage or exposure to heat and moisture.

10.3 Possibility of hazardous reactions

It should be kept away from ignition sources because the decomp products are flammable.FERBAM is a dithiocarbamate. Flammable gases are generated by the combination of thiocarbamates and dithiocarbamates with aldehydes, nitrides, and hydrides. Thiocarbamates and dithiocarbamates are incompatible with acids, peroxides, and acid halides.

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

Strong oxidizers, moisture.

10.6 Hazardous decomposition products

When heated to decomposition it emits very toxic fumes of nitrogen and sulfur oxides.

SECTION 11: Toxicological information

Acute toxicity

  • Oral: LD50 Rat oral 1130 mg/kg
  • Inhalation: LC50 Rat inhalation 0.4 mg/L/4 hr
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

Classification of carcinogenicity: 1) evidence in humans: No adequate data; 2) evidence in animals: Inadequate data. Overall summary evaluation of carcinogenic risk to humans is Group 3: The agent is not classifiable as to its carcinogenicity to humans. From table

Reproductive toxicity

no data available

STOT-single exposure

The substance is irritating to the eyes, skin and respiratory tract. The substance may cause effects on the central nervous system.

STOT-repeated exposure

Repeated or prolonged contact with skin may cause dermatitis. Repeated or prolonged contact may cause skin sensitization. The substance may have effects on the nervous system and thyroid.

Aspiration hazard

Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed.

SECTION 12: Ecological information

12.1 Toxicity

  • Toxicity to fish: LC50 Salmo gairdneri (Rainbow trout, early life stages from the fertilized egg to the early fry stage) 2.9 ug/L/60 day (95% confidence interval: 2.7-3.2 ug/L); renewal
  • Toxicity to daphnia and other aquatic invertebrates: LC50 Daphnia magna 0.09 mg/L/48 hr /Conditions of bioassay not specified in source examined
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

AEROBIC: In pH 3.4 sandy soil, ferbam was largely decomposed after 4 to 5 weeks, while in pH 7.0 soil ferbam was decomposed after 14 to 15 weeks(1). Ferbam took longer than 8 weeks to reach the half-decay point in humus sandy soils as determined by activity to Rhizoctonia solani. If the humus content was 1.2% or below, an initial lag in the start of decomposition was observed(2). Ferbam releases carbon disulfide when it decomposes in soil(3).

12.3 Bioaccumulative potential

An estimated BCF of 3 was calculated for ferbam(SRC), using a log Kow of -1.60(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC), provided the compound is not altered physically or chemically once released into the environment.

12.4 Mobility in soil

The Koc of ferbam is estimated as 300(SRC), using a water solubility of 130 mg/L(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that ferbam is expected to have moderate mobility in soil. Using a soil TLC system (Hagerstown silty clay loam, 2.5% organic matter, 39.5% clay, pH 6.8) visualized by bioautography with 10 soil fungi and one alga, mean Rf values for analytical grade ferbam were 0.93, 0.64, 0.36, and 0.0(4).

12.5 Other adverse effects

no data available

SECTION 13: Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

14.1 UN Number

ADR/RID: UN2811 (For reference only, please check.) IMDG: UN2811 (For reference only, please check.) IATA: UN2811 (For reference only, please check.)

14.2 UN Proper Shipping Name

ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.) IMDG: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.) IATA: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.)

14.3 Transport hazard class(es)

ADR/RID: 6.1 (For reference only, please check.) IMDG: 6.1 (For reference only, please check.) IATA: 6.1 (For reference only, please check.)

14.4 Packing group, if applicable

ADR/RID: I (For reference only, please check.) IMDG: I (For reference only, please check.) IATA: I (For reference only, please check.)

14.5 Environmental hazards

ADR/RID: Yes IMDG: Yes IATA: Yes

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Ferbam Ferbam 14484-64-1 238-484-2
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Not Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.
Korea Existing Chemicals List (KECL) Listed.

SECTION 16: Other information

Information on revision

Creation Date July 15, 2019
Revision Date July 15, 2019

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Other Information

The substance is combustible but no flash point is available in literature.Exposure to Ferbam may cause alcohol intolerance.Depending on the degree of exposure, periodic medical examination is suggested.Carrier solvents used in commercial formulations may change physical and toxicological properties.Ferbam is often used in combinations with dithiocarbamates.

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

Ferbam is included in Bulk Drug Intermediates category.

Related Products

Industry News

More Safety Data Sheets

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.