WD-40 is not an effective remover for cyanoacrylate (super) glues. Straight acetone is the best commonly available material for removing most cyanoacrylates.
WD-40 is not an effective remover for cyanoacrylate (super) glues. Straight acetone is the best commonly available material for removing most cyanoacrylates.
WD-40 Specialist silicone lubricant helps keep rubber components safe. The lubricant can withstand temperature from -35°C to +200°C. The lubricant protects rubber parts from attracting dust and prevents moisture. Give the rubber seals at least an hour to settle properly and then apply the lubricant.
WD-40 Specialist silicone lubricant helps keep rubber components safe. The lubricant can withstand temperature from -35°C to +200°C. The lubricant protects rubber parts from attracting dust and prevents moisture. Give the rubber seals at least an hour to settle properly and then apply the lubricant.
It is rust inhibitor not a savior. If there is oxide (rust) under the WD 40 then it does almost no good.
WD 40 should be applied to a rust free metal surface to protect it from rust. Spraying it on top of rust will slow down the oxidation process but not prevent further rusting.
It is rust inhibitor not a savior. If there is oxide (rust) under the WD 40 then it does almost no good.
WD 40 should be applied to a rust free metal surface to protect it from rust. Spraying it on top of rust will slow down the oxidation process but not prevent further rusting.
Should you use WD-40 on rubber parts to protect them from cracking?
No, absolutely not. In fact, it may damage rubber by dissolving and washing away the oils in the rubber. It may react with the rubber and make it gooey, or harden it. Then it dries out.
And… what “rubber”? We call a lot of things rubber, when they are merely rubbery. Polyurethane rubber, some kinds of vinyl, silicone rubber, latex rubber, etc. All are different, all require different treatments to keep them from cracking.
This is why WD-40 kind of p@@@s me off. People want to treat it like a fix-all.
Should you use WD-40 on rubber parts to protect them from cracking?
No, absolutely not. In fact, it may damage rubber by dissolving and washing away the oils in the rubber. It may react with the rubber and make it gooey, or harden it. Then it dries out.
And… what “rubber”? We call a lot of things rubber, when they are merely rubbery. Polyurethane rubber, some kinds of vinyl, silicone rubber, latex rubber, etc. All are different, all require different treatments to keep them from cracking.
This is why WD-40 kind of p@@@s me off. People want to treat it like a fix-all.
It is best not to. WD-40 is made up of petroleum substances, and some rubber seals will be rotted by it.
Use silicon spray, silicon grease, or a rubber seal lubricant labelled as such.
It is best not to. WD-40 is made up of petroleum substances, and some rubber seals will be rotted by it.
Use silicon spray, silicon grease, or a rubber seal lubricant labelled as such.
More
VOTE
That depends on usage. There’s no empirical answer.
Keep trying. I know you’ve got more wd40 questions. Like, ”can you spray wd-40 on an elephant?”
Does Quora really pay enough to keep asking this stuff?
That depends on usage. There’s no empirical answer.
Keep trying. I know you’ve got more wd40 questions. Like, ”can you spray wd-40 on an elephant?”
Does Quora really pay enough to keep asking this stuff?
More
VOTE
Idoits certainly can!!
Smart people won't, they will use light machine oil!!
Collect your quora pennies
Idoits certainly can!!
Smart people won't, they will use light machine oil!!
Collect your quora pennies
More
VOTE
WD-40 is not an effective remover for cyanoacrylate (super) glues. Straight acetone is the best commonly available material for removing most cyanoacrylates.
WD-40 is not an effective remover for cyanoacrylate (super) glues. Straight acetone is the best commonly available material for removing most cyanoacrylates.
More
VOTE
WD-40 Specialist silicone lubricant helps keep rubber components safe. The lubricant can withstand temperature from -35°C to +200°C. The lubricant protects rubber parts from attracting dust and prevents moisture. Give the rubber seals at least an hour to settle properly and then apply the lubricant.
WD-40 Specialist silicone lubricant helps keep rubber components safe. The lubricant can withstand temperature from -35°C to +200°C. The lubricant protects rubber parts from attracting dust and prevents moisture. Give the rubber seals at least an hour to settle properly and then apply the lubricant.
More
VOTE
Certainly not!! It is a petroleum based product and should never be used on any rubber products!!
Collect your quora pennies
Certainly not!! It is a petroleum based product and should never be used on any rubber products!!
Collect your quora pennies
More
VOTE
Water Displacement exp # 40 = WD 40.
It is rust inhibitor not a savior. If there is oxide (rust) under the WD 40 then it does almost no good.
WD 40 should be applied to a rust free metal surface to protect it from rust. Spraying it on top of rust will slow down the oxidation process but not prevent further rusting.
Water Displacement exp # 40 = WD 40.
It is rust inhibitor not a savior. If there is oxide (rust) under the WD 40 then it does almost no good.
WD 40 should be applied to a rust free metal surface to protect it from rust. Spraying it on top of rust will slow down the oxidation process but not prevent further rusting.
More
VOTE
Getting dumber & dumber but on topic!!
Since wD40 is petroleum based it should never be used on “rubber”
Collect your quora pennies
Getting dumber & dumber but on topic!!
Since wD40 is petroleum based it should never be used on “rubber”
Collect your quora pennies
More
VOTE
Should you use WD-40 on rubber parts to protect them from cracking?
No, absolutely not. In fact, it may damage rubber by dissolving and washing away the oils in the rubber. It may react with the rubber and make it gooey, or harden it. Then it dries out.
And… what “rubber”? We call a lot of things rubber, when they are merely rubbery. Polyurethane rubber, some kinds of vinyl, silicone rubber, latex rubber, etc. All are different, all require different treatments to keep them from cracking.
This is why WD-40 kind of p@@@s me off. People want to treat it like a fix-all.
Should you use WD-40 on rubber parts to protect them from cracking?
No, absolutely not. In fact, it may damage rubber by dissolving and washing away the oils in the rubber. It may react with the rubber and make it gooey, or harden it. Then it dries out.
And… what “rubber”? We call a lot of things rubber, when they are merely rubbery. Polyurethane rubber, some kinds of vinyl, silicone rubber, latex rubber, etc. All are different, all require different treatments to keep them from cracking.
This is why WD-40 kind of p@@@s me off. People want to treat it like a fix-all.
More
VOTE
People can spray WD40 uppa US to prevent constipation!!
Collect your quora pennies for staying on topic
People can spray WD40 uppa US to prevent constipation!!
Collect your quora pennies for staying on topic
More
VOTE
If your even a little bit smart you ever do!! Since it's petroleum based it attacks rubber and will destroy it!!
It also leaves a sticky mess to deal with!!
Collect your quora pennies and buy something that actually works!!
If your even a little bit smart you ever do!! Since it's petroleum based it attacks rubber and will destroy it!!
It also leaves a sticky mess to deal with!!
Collect your quora pennies and buy something that actually works!!
More
VOTE