Home >
Community >
Is the elimination reaction between 1 1 dibromo cyclopropane and phenyl lithium feasible in alkaline medium (and some heat)
Upvote
28
Downvote
+ Elimination
+ Chemistry
Posted by
Ooi Teng He
Is the elimination reaction between 1 1 dibromo cyclopropane and phenyl lithium feasible in alkaline medium (and some heat)
The alkene formation is not correct under this conditions. This is an example of Doering–LaFlamme allene synthesis, a reaction of alkenes that converts to allenes by insertion of a carbon atom introduced in 1958 (Ref.1; see user user55119's comment). In abstract, it states that:
In a two-step sequence, of which the first step involves addition of dibromocarbene to an olefin and the second involves reaction of the resulting substituted 1,1-dibromocyclopropane with magnesium or sodium, allenes are obtained. The overall structural change involves the insertion of a single carbon atom between the two of the original double bond and therefore represents a novel way of increasing carbon chain lengths by one atom.
In your example, the compound has undergone the insertion of additional carbon atom (between two $\mathrm{sp^2}$-carbon atoms of the original double bond). Therefore, it's now the rearrangement part assited by organo lithium compound, the mechanism of which is depicted in following diagram (Ref.2):
Accordingly, the first step of the gem-dihalocyclopropane (I) with alkyllithium can be depicted as a halogen-lithium inter-conversion with formation of a 1-lithio-1-halocyclopropane derivative II. The reaction is dependent on the nature of both halide and the lithium reagent, but its mechanism is not fully understood (Ref.2). For example, bromides react much more readily that the corresponding chlorides, and butyl lithium is generally much more reactive than methyllithium. It is expected that intermediate II would readily eliminate lithium halide as discussed in Ref.1. This may occur by two different mechanisms: (i) Pathway $\color{blue}{\bf{a}}$: Concerted elimination and ring openig to an allene; or (ii) Pathway $\color{maroon}{\bf{b}}$: An $\alpha$-eleminatin to the carbene intermediate III (Ref.2). The author comments that the pathway $\color{blue}{\bf{a}}$ may well be the way by which allenic product has been formed, although it appears that cyclopropyl anions have considerable stability. However, the formation of non-allenic isomers (byproducts) in a number of these reactions is difficult to explain (Ref.2).
Lars Skattebøl, "The Synthesis of Allenes from 1.1-Dihalocyclopropane Derivatives and Alkyllithium," Acta Chem. Scand.1963, 17(6), 1683 – 1693 (DOI: 10.3891/acta.chem.scand.17-1683).
The alkene formation is not correct under this conditions. This is an example of Doering–LaFlamme allene synthesis, a reaction of alkenes that converts to allenes by insertion of a carbon atom introduced in 1958 (Ref.1; see user user55119's comment). In abstract, it states that:
In a two-step sequence, of which the first step involves addition of dibromocarbene to an olefin and the second involves reaction of the resulting substituted 1,1-dibromocyclopropane with magnesium or sodium, allenes are obtained. The overall structural change involves the insertion of a single carbon atom between the two of the original double bond and therefore represents a novel way of increasing carbon chain lengths by one atom.
In your example, the compound has undergone the insertion of additional carbon atom (between two $\mathrm{sp^2}$-carbon atoms of the original double bond). Therefore, it's now the rearrangement part assited by organo lithium compound, the mechanism of which is depicted in following diagram (Ref.2):
Accordingly, the first step of the gem-dihalocyclopropane (I) with alkyllithium can be depicted as a halogen-lithium inter-conversion with formation of a 1-lithio-1-halocyclopropane derivative II. The reaction is dependent on the nature of both halide and the lithium reagent, but its mechanism is not fully understood (Ref.2). For example, bromides react much more readily that the corresponding chlorides, and butyl lithium is generally much more reactive than methyllithium. It is expected that intermediate II would readily eliminate lithium halide as discussed in Ref.1. This may occur by two different mechanisms: (i) Pathway $\color{blue}{\bf{a}}$: Concerted elimination and ring openig to an allene; or (ii) Pathway $\color{maroon}{\bf{b}}$: An $\alpha$-eleminatin to the carbene intermediate III (Ref.2). The author comments that the pathway $\color{blue}{\bf{a}}$ may well be the way by which allenic product has been formed, although it appears that cyclopropyl anions have considerable stability. However, the formation of non-allenic isomers (byproducts) in a number of these reactions is difficult to explain (Ref.2).
Lars Skattebøl, "The Synthesis of Allenes from 1.1-Dihalocyclopropane Derivatives and Alkyllithium," Acta Chem. Scand.1963, 17(6), 1683 – 1693 (DOI: 10.3891/acta.chem.scand.17-1683).
But sir , how does phenyllithium affect the reaction (compared to any non aromatic organolithiums)??More
Upvote
VOTE
Downvote
There are two pathways that phenyllithium could follow - it could deprotonate, but there really not any reactive protons, or it could do lithium-halogen exchange with one of gem-bromines. This second pathway will lead to a carbene by loss of $\ce{Br-}$ and the carbene (a highly reactive intermediate) will rearrange to give allene $\ce{H2C=C=CH2}$.
This method is documented:
In Page 275: H. Maskill, "Chapter 1: Three- and Four-Membered Carbocyclic Rings," In Specialist Periodical Reports - Aliphatic, Alicyclic and Saturated Heterocyclic Chemistry, Volume 1, Part II: Three‐ and four‐membered rings (carbocyclic and saturated heterocyclic); W. Parker, Ed. (Senior Reporter); The Chemical Society: Burlington House, London, England, 1973, pp. 3-292 (ISBN: 0-85186-502-X).
In Pages 1492-1493: Armin de Meijere, Editor, Carbocyclic Three-Membered Ring Compounds, Houben-Weyl Methods of Organic Chemistry, Volume E 17 b - Cyclopropanes: Synthesis; Georg Thieme Verlag: Stuttgart, Germany, 1997, p. 1492 (ISBN: 978-3-13-798204-3).
There are two pathways that phenyllithium could follow - it could deprotonate, but there really not any reactive protons, or it could do lithium-halogen exchange with one of gem-bromines. This second pathway will lead to a carbene by loss of $\ce{Br-}$ and the carbene (a highly reactive intermediate) will rearrange to give allene $\ce{H2C=C=CH2}$.
This method is documented:
In Page 275: H. Maskill, "Chapter 1: Three- and Four-Membered Carbocyclic Rings," In Specialist Periodical Reports - Aliphatic, Alicyclic and Saturated Heterocyclic Chemistry, Volume 1, Part II: Three‐ and four‐membered rings (carbocyclic and saturated heterocyclic); W. Parker, Ed. (Senior Reporter); The Chemical Society: Burlington House, London, England, 1973, pp. 3-292 (ISBN: 0-85186-502-X).
In Pages 1492-1493: Armin de Meijere, Editor, Carbocyclic Three-Membered Ring Compounds, Houben-Weyl Methods of Organic Chemistry, Volume E 17 b - Cyclopropanes: Synthesis; Georg Thieme Verlag: Stuttgart, Germany, 1997, p. 1492 (ISBN: 978-3-13-798204-3).
The alkene formation is not correct under this conditions. This is an example of Doering–LaFlamme allene synthesis, a reaction of alkenes that converts to allenes by insertion of a carbon atom introduced in 1958 (Ref.1; see user user55119's comment). In abstract, it states that:
In your example, the compound has undergone the insertion of additional carbon atom (between two $\mathrm{sp^2}$-carbon atoms of the original double bond). Therefore, it's now the rearrangement part assited by organo lithium compound, the mechanism of which is depicted in following diagram (Ref.2):
Accordingly, the first step of the gem-dihalocyclopropane (I) with alkyllithium can be depicted as a halogen-lithium inter-conversion with formation of a 1-lithio-1-halocyclopropane derivative II. The reaction is dependent on the nature of both halide and the lithium reagent, but its mechanism is not fully understood (Ref.2). For example, bromides react much more readily that the corresponding chlorides, and butyl lithium is generally much more reactive than methyllithium. It is expected that intermediate II would readily eliminate lithium halide as discussed in Ref.1. This may occur by two different mechanisms: (i) Pathway $\color{blue}{\bf{a}}$: Concerted elimination and ring openig to an allene; or (ii) Pathway $\color{maroon}{\bf{b}}$: An $\alpha$-eleminatin to the carbene intermediate III (Ref.2). The author comments that the pathway $\color{blue}{\bf{a}}$ may well be the way by which allenic product has been formed, although it appears that cyclopropyl anions have considerable stability. However, the formation of non-allenic isomers (byproducts) in a number of these reactions is difficult to explain (Ref.2).
References:
The alkene formation is not correct under this conditions. This is an example of Doering–LaFlamme allene synthesis, a reaction of alkenes that converts to allenes by insertion of a carbon atom introduced in 1958 (Ref.1; see user user55119's comment). In abstract, it states that:
In your example, the compound has undergone the insertion of additional carbon atom (between two $\mathrm{sp^2}$-carbon atoms of the original double bond). Therefore, it's now the rearrangement part assited by organo lithium compound, the mechanism of which is depicted in following diagram (Ref.2):
Accordingly, the first step of the gem-dihalocyclopropane (I) with alkyllithium can be depicted as a halogen-lithium inter-conversion with formation of a 1-lithio-1-halocyclopropane derivative II. The reaction is dependent on the nature of both halide and the lithium reagent, but its mechanism is not fully understood (Ref.2). For example, bromides react much more readily that the corresponding chlorides, and butyl lithium is generally much more reactive than methyllithium. It is expected that intermediate II would readily eliminate lithium halide as discussed in Ref.1. This may occur by two different mechanisms: (i) Pathway $\color{blue}{\bf{a}}$: Concerted elimination and ring openig to an allene; or (ii) Pathway $\color{maroon}{\bf{b}}$: An $\alpha$-eleminatin to the carbene intermediate III (Ref.2). The author comments that the pathway $\color{blue}{\bf{a}}$ may well be the way by which allenic product has been formed, although it appears that cyclopropyl anions have considerable stability. However, the formation of non-allenic isomers (byproducts) in a number of these reactions is difficult to explain (Ref.2).
References:
More
VOTE
VOTE
VOTE
There are two pathways that phenyllithium could follow - it could deprotonate, but there really not any reactive protons, or it could do lithium-halogen exchange with one of gem-bromines. This second pathway will lead to a carbene by loss of $\ce{Br-}$ and the carbene (a highly reactive intermediate) will rearrange to give allene $\ce{H2C=C=CH2}$.
This method is documented:
There are two pathways that phenyllithium could follow - it could deprotonate, but there really not any reactive protons, or it could do lithium-halogen exchange with one of gem-bromines. This second pathway will lead to a carbene by loss of $\ce{Br-}$ and the carbene (a highly reactive intermediate) will rearrange to give allene $\ce{H2C=C=CH2}$.
This method is documented:
More
VOTE
VOTE
VOTE
VOTE
VOTE