Use DMP-30 as an epoxy curing agent, what is its dosage and curing conditions?Thanks!

DMP30 is rarely used like this if it curresses epoxy.It is usually used as a promoter for other products. As for the temperature, it depends entirely on your curing agent

Which model is the epoxy resin you used

The time time for the curing agent alone is 10PHR, and the promotional agent is 0.1-3% of the epoxy volume of 185-195, 64 °/3H+130 °/1H

DMP-30 is a curing agent of epoxy resin. The general dosage is calculated by 100 copies of epoxy resin as about 10 copies.The curing conditions are 3-4 days at room temperature.
Because the DMP-30 is a three-grade amine, the molecular structure does not contain lively hydrogen, and there is no way to calculate the amount of distribution according to the number of lively hydrogen.
In fact, the DMP-30 is more used in a promoter for curing epoxy resin as an anhydride, and the effect is very good.

Add 1%, generally as a promoter for the epoxy/acid anhydride system

The one upstairs should be right!