Hernia treatment belt

The hernia treatment belt is composed of elastic band, artificial leather, knitted fabric, composite fabric, rubber strip, plastic bag, Velcro, buckle, hernia pad (filler), inflatable pad, tarpaulin ring airbag, catheter, air stop valve, inflatable ball, etc. The filler of the hernia pad is powdered wood; the inflatable pad is made of PVC through high-frequency heat sealing. The inflatable pressurized type is based on the ordinary type, with an inflatable airbag added in the main lining cloth interlayer, corresponding to the inside and outside of the hernia pad. When using it, the patient inflates the airbag through the inflatable ball to make the airbag swell, and uses the binding force generated by the elastic band to compress the hernia pad, thereby increasing the pressure of the pad.

Suitable for the control and treatment of inguinal oblique hernia, femoral hernia, direct hernia and umbilical hernia.

1. When using, the patient lies flat, gently push the hernia contents behind the hernia ring back into the abdomen, and place the hernia pad in the corresponding pocket. 2. Align the hernia pad with the hernia ring opening and tighten the belt with appropriate tightness, then wrap one end of the two straps from the inner thigh to the outer thigh, and fix them on the Japanese-style adjustment buckles on both sides of the belt in front of the abdomen. (When the straps pass through the inner thigh, they must not press on the scrotum and testicles). 3. Inflation and pad use (1) Ordinary and hardcover hernia belts: There is a Velcro on the pad. Place the pad on the inner groove of the patient's abdomen where the hernia is located, and fix it on the Velcro at the junction of the belt and the belt. (2) Inflatable and pressurized hernia belt: Use an inflatable ball to inflate the airbag to increase the pressure. There is a Velcro on the pad. According to the position of the patient's hernia ring opening, it can be fixed to the corresponding position of the Velcro on the outer sleeve of the airbag. 4. Waist belt. The tightness of the belt should be determined when the hernia contents no longer bulge (droop). 5. Hernia belts are generally used for more than three months. If they still fall off during the wearing period, find out the cause and correct it, and continue to wear them.

Ordinary adult type, ordinary child type, inflatable pressurized adult type, inflatable pressurized child type, infant type