Sulfonated phenolic resin 99%
19 Inquiries
9003-35-4
Industrial Grade
99%
QINGDAO
25kg/0.1kg Bag (Customized For YELLOW MOUNTAIN)
2017-01-08
-
Product Description
-
Seller Information
-
Inquiry History
-
Description
Sulfonated phenol formaldehyde resin (SMP-I, II)
Product introduction:
Sulfonated phenolic resin as anionic water-soluble polyelectrolytes, is a kind of heat resistant and salt tolerant filtrate reducer for drilling fluid, and common use of sulphonated lignite, sulfonated tannin and sulfonated asphalt etc, can be configured "three sulfonylurea" mud system, is one of the ideal high temperature deep mud system.
Two, performance uses:
SMP sulfonated phenolic resin was introduced in benzene sulfonic acid unit, benzene ring and connected between carbon atoms. Can resist high temperature. And because the introduction of benzene sulfonic acid sodium based -SO3Na in ortho, hydration, associating the keys of the water is high, so it solves its water solubility, determines its salt and calcium, reduce water loss of high temperature high pressure drop. Sulfonated phenolic resin as a deep well mud treatment agent, with high temperature and high pressure drop water loss, salt, anti calcium, and reduce the friction coefficient of mud cake and other good performance, for the consolidation of the wall, anti collapse, anti card has an important role. Recommended dosage 1-3%.
Physical and chemical index
Project index
SMP-I dry agent SMP-II dry agent
Free movement of the powder 10% of the water solution of the color of brown free activities of the powder 10% of the water solution for the color of brown red
Base content,% = 90 = 90
Water insoluble matters,% = 10 = 8
Dynamic viscosity, MPa.s -.
The cloud point of salinity (CL-), g/l = 100 = 160)
The apparent viscosity of MPa.s is less than 25, less than 50
High temperature and high pressure filtration is less than or equal to 25 is less than or equal to 35
Three, packaging and transportation storage:
This product uses "three in one" bag packaging, lined with polyethylene film bag, net weight 25kg per bag; stored in a cool, dry, ventilated place. Avoid contact with eyes, skin and clothes, or use a lot of water to clean, away from the fire source.
Basic Info-
Product Name:
Formaldehyde-phenol copolymer
Other Name:Phenol,polymer with formaldehyde;Kerite (polymer);Renoterm 67;Phenol-formaldehyde resin;Phenol-formaldehyde polymer;Phenol-formaldehyde condensate;BRLY 1215;Ironsides 1111;Formaldehyde-phenol resin;Resinox 773;ATM 2;Corephenit HB;Corephenit;FL 1 (phenolic resin);FO 80;Formaldehyde-phenol polymer;Rousselot 75.00;FKP;FFR;Alpit;Phenodur PR 897;Novolak 18;ATM 1;AW 1;BRL 2741;BRPA 5570;BRR 5555;BSL (phenolic resin);Cellobond J 1010;CTL 91LD;Durez 12686;Durez 12687;F 50 (phenolic resin);FRP 1A;I 21-22;K 15-2;K 21-22;MILR 9299-II;Modofen 53;Modofen 56;P 3-1;P 5-2;Phenodur PR 141;Resol 300;RFN 60;RI 4009;SBS 1;SNK 2-27;Tegofilm M 12B;TsNIIF;Varcum 2406;VFT;VIAM-B 3;Voloknit VL 2;Pololit E;MDPV;VRB;Resopen;Corephenit HBZ;FK 20;KDFF;Kaproplast KSG;SBS 11;FFB;Foundrez 23-703;Rezocol;Kreodur;Retinax FK 16L;FRV 1;ZhN;FRV 4;DN;R 300;Albertol 626L;VW 65059;Bakelite 207;Bakelite 222;Tegocoll DO 1;ZkN;K 18-2;LBS 3;RA 51;N 1320;K 4;NS (resin);TS (resin);K 18;Bakelite BRL 2760;18U;DPK;CR 9357;Noburit HH;Phenodur PR 722;Novogen P 40;Kauresin 250;FK 24A;6KKh1B;Vulkadur A;Novolak 18u;R 10993;Heresite;AG 4B;AG 4C;PM 932;M 0;RP 902;SBS (phenolic resin);Alnovol 844K;K 17-2;VIAM-B;Iditol (polymer);ZhB;F 110;Cellobond J 1990/60;2P1000;Caproplast;Kaproplast;Duroplast 9001;Cascophen W 166;W 166F;SFK 2;SF 339;PF 541;PF 544;Amres 5581;Kaproplast KS;MP 120 (phenolic resin);K 4 (phenolic resin);Phenodur PR 101;9038-25-9;9048-48-0;9048-61-7;9049-60-9;9050-10-6;9050-11-7;9050-66-2;9073-89-6;9079-79-2;9082-36-4;9082-37-5;9087-36-9;9087-71-2;11120-43-7;11138-48-0;12619-76-0;12773-09-0;12773-11-4;12773-12-5;12773-14-7;12798-23-1;37187-19-2;37191-60-9;37209-25-9;37211-56-6;37218-05-6;37260-15-4;37281-00-8;37281-33-7;37291-51-3;37328-79-3;37331-31-0;37331-34-3;37336-53-1;37339-83-6;39277-48-0;39284-11-2;39284-12-3;39284-17-8;39320-26-8;39339-94-1;39382-13-3;39389-44-1;39389-57-6;39412-69-6;39423-38-6
CAS No.:9003-35-4
Molecular Formula:(C6H6O.CH2O)x
InChIKeys:InChIKey=SLGWESQGEUXWJQ-UHFFFAOYSA-N
Molecular Weight:122.12134
Exact Mass:124.052429
EC Number:611-584-7
DSSTox ID:DTXSID2049713
HScode:3909400000
Categories:
Characteristics-
PSA:
29.5
XLogP3:1.70920
Appearance:light yellow granule
Density:1.10 g/cm3
Melting Point:94 °C
Hazard IdentificationClassification of the substance or mixture
Skin sensitization, Category 1
Eye irritation, Category 2
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P273 Avoid release to the environment.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P317 If skin irritation or rash occurs: Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage none
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Location:
Chengguan town Xinmi City Zhai village
Henan Ocean Chemical Co. Ltd., is located 50 kilometers southwest of Zhengzhou city in Henan Province, Xinmi City Chengguan Town Village North Zhai, high-speed 3 kilometers, highway and Zheng Deng from the front through, the traffic is very convenient. The company covers an area of more than 20 thousand square meters, construction area of more than 12 thousand square meters, has a skilled, proficient in technical staff, including professional engineering and technical personnel 15 people (5 people, senior technical titles and intermediate technical titles and 4). Company annual total output of up to 30000 tons, annual output value of 180 million yuan.Henan Ocean Chemical Co. Ltd., is a China National Petroleum Company of oilfield chemical network members; oil drilling mud materials professional manufacturers; production equipment, product quality is stable and reliable, the production of products through the natural gas group company's product quality approval.Our main products are: "three sulfonylurea" series (sulfonated phenolic resin SMP, low fluorescence sulfonated asphalt DFT-1, sulfonated lignite SMC series (PAM); polymer polyacrylamide, potassium polyacrylate KPAM, amphoteric polymer strong coating agent FA367, vinyl monomer copolymer PAC - 141142143) (ultrafine calcium carbonate series; heavy calcium carbonate superfine calcium carbonate, silicon (silicon fluorine series); diluent GF-1, silicon fluorine filtration reducing agent GX-1, silicone stabilizer GW-1, organosilicon potassium humate; (QSAM-K) a series of new environmental pollution resistant high temperature resistant viscosity reducer JN-2, filtrate reducer KJ-1, temperature and salt resistant filtration reducing agent JK-2 RH-2, new lubricant, low fluorescent white asphalt, MMH powder MMH) series products.The company always adhere to the "market-oriented, science and technology as the guide, to the quality of survival, reputation and development" purposes, products sold in North China, Daqing, Xinjiang, Henan, Central Plains, Dianqiangui, Jidong and other major domestic oil, widely praised by users. Chairman Chu Jianxia is willing to work closely with our staff with you, hand in hand, create a better future.
-
-
Inquiry History19 Inquiries
Country Product Purchase Quantity Date Posted 
Bangladesh
Phenolic resin
2 KG Aug 30, 2025 
United Kingdom
Liquid Phenol Formaldehyde Resin
2 MT Sep 24, 2025 
Vietnam
phenolic resin
5000 KG Jan 6, 2025 
South Korea
phenolic formaldehyde resin
1 TON Nov 10, 2023 
Saudi Arabia
PHENOL FORMALDEHYDE RESIN OCTYL PHENOL BASED FOR CURING
1 KG Aug 25, 2023
Bangladesh
Phenolic Resin Drt4002
1 20' Fcl Aug 5, 2025 
Kazakstan
Unmodified Phenol Formaldehyde Resin
200 TON Jun 12, 2025 
Canada
Phenol-formaldehyde resin
10 MT May 16, 2025 
Pakistan
Phenolic resin
7.00 TON Apr 7, 2025
United Kingdom
Phenol-formaldehyde resin
81 MT Jan 15, 2024 
Argentina
Phenol-Formaldehyde resin
100 KG Dec 1, 2023 
Turkey
Formaldehyde-phenol copolymer
1 KG Oct 6, 2023
Bangladesh
Phenolic Resin
1 KG Nov 25, 2025 
United States
Phenolic Resin
31200 KG Jul 28, 2025
Pakistan
Phenolic Resin
1 20' Fcl May 22, 2025 
India
Phenolic Resin Part No. 2123 Powder
4 KG Nov 26, 2024
Bangladesh
Phenolic Resin
500 Feb 22, 2024 
United Arab Emirates
Phenolic Resin
2 MT Dec 19, 2023 
Peru
SOLID PHENOLIC RESIN
5000 TON Oct 9, 2023 Post an enquiry for this product
