1,3,5-Trichlorobenzene Industrial Grade
3 Inquiries
108-70-3
Industrial Grade
SHANGHAI
25kg/2kg Cardboard Drum
2034-12-31
-
Product Description
-
Seller Information
-
Inquiry History
-
Description
Long needle like crystals. The melting point of 63.5 DEG C, the flash point of 126 DEG C, the boiling point of 208.5 DEG C. Have a special smell. Insoluble in water, slightly soluble in ethanol, soluble in ethyl ether. Synthesis of organic synthesis, pesticides and dyes. The drying of the six six six non-toxic body is heated in the pyrolysis kettle to get three of the heat, and at the same time, a large amount of hydrogen chloride is produced.
physical property
Appearance and properties: white crystal, with special odor.
Melting point (c):63.4
Boiling point (c):208.5
Relative vapor density (air =1): 6.26
Molecular formula: C6H3Cl3
Molecular weight: 181.45
Saturated vapor pressure (kPa):1.33 (78 C)
Solubility: insoluble in water, slightly soluble in alcohol, soluble in ethyl ether, benzene [1]
chemical property
In case of fire can burn. In the air is heated to decompose and release toxic phosgene hydrogen chloride gas. Contact with oxidant.
Basic Info-
Product Name:
1,3,5-Trichlorobenzene
Other Name:Benzene,1,3,5-trichloro-;1,3,5-Trichlorobenzene;sym-Trichlorobenzene;s-Trichlorobenzene;Symmetrical trichlorobenzene;NSC 4389
CAS No.:108-70-3
Molecular Formula:C6H3Cl3
InChIKeys:InChIKey=XKEFYDZQGKAQCN-UHFFFAOYSA-N
Molecular Weight:181.44700
Exact Mass:181.45
EC Number:203-608-6
UNII:2HS4M0BX3C
ICSC Number:0344
NSC Number:4389
DSSTox ID:DTXSID8026195
Color/Form:Needles|White crystals|Long needles
HScode:2903999090
Categories:
Characteristics-
PSA:
0
XLogP3:3.64680
Appearance:1,3,5-trichlorobenzene appears as white to off-white crystals. (NTP, 1992)
Density:1 x 10-6 g/cm3 @ Temp: 100 °C
Melting Point:63.5 °C
Boiling Point:208 °C @ Press: 763 Torr
Flash Point:126ºC
Refractive Index:1.5662 (20ºC)
Water Solubility:soluble in benzene, ether, ligroin (Weast, 1986), glacial acetic acid, carbon disulfide, and petroleum ether (Windholz et al., 1983);Solubility in water, g/100ml at 25°C: 0.0006
Storage Conditions:0-6ºC
Vapor Pressure:0.267mmHg at 25°C
Vapor Density:6.26 (NTP, 1992) (Relative to Air)
Toxicity:Drinking water standard: No MCLGs or MCLs have been proposed, however, a DWEL of 200 μg/L was recommended (U.S. EPA, 2000).
Henrys Law Constant:0.00 atm-m3/mole|Henry's Law constant = 1.89X10-3 atm-cu m/mol at 25 °C
Experimental Properties:Volatile with steam|Enthalpy of fusion: 18.1 kJ/mol|Hydroxyl radical reaction rate constant = 6.8X10-13 cu cm/molec-sec at 25 °C (est)
Air and Water Reactions:Insoluble in water.
Reactive Group:Aryl Halides
Reactivity Profile:Can react vigorously with oxidizing materials. (NTP, 1992).
Heat of Vaporization:278.8 J/g at 100 °C; 259.2 at 150 °C; 239.1 at 200 °C
Critical Temperature & Pressure:Critical temperature: 470.8 °C; Critical pressure: 3.01 mPa
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 4, Oral
Acute toxicity - Category 4, Dermal
Skin irritation, Category 2
Eye irritation, Category 2
Acute toxicity - Category 4, Inhalation
Specific target organ toxicity â single exposure, Category 3
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
Response P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P317 Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P332+P317 If skin irritation occurs: Get medical help.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from strong oxidants. Keep in a well-ventilated room.In general it is unsafe to store oxidizers close to liquids of low flash point. ... Keep all flammables away from an area where oxidizing agents are stored. This storage area should be kept cool and ventilated, and should be fireproof.
-
-
Seller Information
-
Business Type:
Manufactory
-
Location:
Funing chemical industry park, Ecological Road No. 18
Yancheng Anshun chemical adhering to the "integrity, pragmatic, positive and enterprising" spirit of enterprise, "people-oriented, sincere service, quality first, the pursuit of excellence" business philosophy, adhere to the "create new industry standard, do hundred years business" of the enterprise purpose for our customers to provide quality services. Welcome new and old customers to visit the guidance.Yancheng Anshun Chemical Co., Ltd. created in 2006, is located in the National Chemical Industry Park, Yancheng Funing Aoyang Industrial Park, is a set production, processing, marketing, research and development as one of the high-tech private enterprises. Full implementation of 5S management, import ERP management system, establish and improve the production management system. Adhere to the total amount, all - round, full - time management, to further strengthen the standardized, systematic, scientific development. In accordance with the scientific management system, the production workshop to carry out the technical and equipment installation update, improve the production process. Companies to absorb the country's industry elite, has a young and promising set of production, research, procurement, management and sales management team.Yancheng Anshun chemical industry mainly produces lipid chemical products, the main products include: methyl hydroxy ethyl acrylate, methyl hydroxypropyl acrylate, acrylic hydroxyl ethyl methacrylate, hydroxypropyl acrylate; purity 98%, completely replace imported products, is the domestic same industry leading level, the products have ROHS certification. Company in line with the principle of "environmental protection, security, and savings of the R & D, production with the market competitiveness of products with high quality, and provide first-class after-sales service and technical support, and the upstream and downstream customers to maintain good relations of cooperation.All the staff the spirit of "integrity and pragmatic, unremitting self-improvement spirit of occupation, grateful". We have products delivered to his temper, will be delivered to the market to decide the quality, credibility will be delivered to customer reviews, which qualitatively a tempered always to the right of the enterprise purpose, high-quality products, reasonable price and satisfactory service. Wholeheartedly for your service, and your common progress!
-
-
Inquiry History3 Inquiries
Country Product Purchase Quantity Date Posted 
India
Trichlorobenzene
20 MT May 17, 2024 
United States
1,3,5-Trichlorobenzene
1 MT Mar 25, 2024 
United Kingdom
1,3,5-Trichlorobenzene
1 KG Aug 28, 2025 Post an enquiry for this product
