Polysiloxane finish paint 70%

Product composition:

High solid polysiloxane finish, double package.

Product features:

Excellent water resistance and moisture resistance; Excellent corrosion resistance of chemical substances; Excellent aging resistance, powdery and anti-uv performance; Tough film

With strong impact resistance and good wear resistance; Good oil resistance and solvent resistance; Excellent adhesion, compact film structure.

Product use:

Polysiloxane paint can be applied to the coating of the concrete or steel surface of the high concrete or steel surface for the protection of the gloss of the paint film under serious environmental pollution.

Instructions:

Coating method: high-pressure airless spraying, compressed air spraying, brush painting, rolling

The base material should be mixed evenly before adding the curing agent to mix together thoroughly. Recommended power agitator. After mixing, it is suitable

The amount is added to the diluent, stirring evenly, and adjusting the construction viscosity to facilitate the construction.

Precoating: zinc rich primer, epoxy intermediate paint, polyurethane primer.

Coating interval:

Substrate temperature 0 ℃, the shortest 24 hours, the longest unlimited

Substrate temperature of 23 ℃, the shortest 8 hours, the longest unlimited

Substrate temperature of 40 ℃, the minimum 6 hours, the longest unlimited

Technical indicators:

Appearance: white and many national standard colors

Luster: smooth and smooth, high gloss

Thinner: T-00 thinner

Ratio: group a: part b = 5:1 (weight ratio)

Shelf life: 3 hr (23 ℃)

Maturity: 10min

Drying time: the table stem is less than or equal to 4hr; Hard dry 6 hr or less; Completely cure time 7 d (23 ℃)

Theoretical dosage: 0.13kg/m2(30 mu m dry film meter, typical dry film thickness) allows for the loss of different construction conditions.

Packing specifications:

Section a (base material) 20kg, b (curing agent) 4kg according to customer demand and the reason of loading and unloading, may have different packing specifications.

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 12 months. After that, it should be checked and used.

Notes:

If the paint is splashed into your eyes, rinse immediately with water and ask for medical treatment. Apply soap and water to wash or use the appropriate industry if the skin is stained with paint

Cleaning agent, it is best not to use a lot of solvent or thinner.

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid prolonged inhalation of solvents

Steam or paint fog, the skin, eyes are not allowed to contact this product, in the narrow place or the air is not in the general construction, must provide strong ventilation, should wear good protection during construction

.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change

The latest specifications of our company are subject to change without prior notice.