Chlorosulfonated polyethylene antiseptic primer

Product composition:

Chlorosulfonated polyethylene anticorrosive primer of chlorosulfonated polyethylene rubber base makings, join the modified resin, pigments, fillers, solvents, additives, curing agent and so on, points a, b a two-component packaging.

Product features:

Chloro-sulfonated polyethylene anticorrosive primer has good anticorrosion, toughness, strong adhesion and low temperature construction, good adhesion, strong adhesion and easy to use. They are red, bright and brown with excellent shielding.

Product use:

Chloro-sulfonated polyethylene antiseptic primer can be widely used as antirust primer for metal surfaces and can also be used as primer for concrete surfaces.

Instructions:

Coating method: brush, roll, spray

After coating: chloro-sulfonated polyethylene intermediate paint, surface paint

Coating intervals: 23 + 2 ℃, the shortest: 2 hours, the longest: 7 days

Technical indicators:

Appearance: iron red, tan, or by the user request to make a light color primer.

Flash: 1:10 ℃; B: 16 ℃

Ratio: j53-81: a: b = 10:1 (weight ratio)

Drying time: 23 + 2 ℃ : table dry: 0.5 hours, work: 24 hours, fully cured 7 days

Construction viscosity: brush painting and roll for 60 ~ 80 seconds (coating -4 cups)

Diluent: special diluent of X-1 chlorosulfonated polyethylene coating

Shelf life: 23 + 2 ℃ : 12 hours

Density: iron red: about 1.0; Tan: about 1.05.

Ripening stage: mixing can be used

Coating thickness: j53-80:30 ~ 35 micron; J53-81:25 ~ 30 microns

Theoretical dosage: brush painting, roller coating 200 ~ 220/ square meter

Packing specifications:

Iron bucket group a 20kg; The hydrated points 4 kg

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

If the paint is splashed into your eyes, rinse immediately with water and ask for medical treatment. If skin is stained with paint, apply soap and water to wash or use appropriate industrial cleaning agent, it is best not to use a large amount of solvent or thinner.

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.