Thin-walled steel structure anticorrosive paint

Product composition:

Thin wall steel structure anticorrosive coating is composed of modified hydroxyl acrylic resin, diurea isocyanate, high quality refining, additive solvent.

Product features:

Thin-walled steel structure with thinner coating can adapt to the corrosion and decoration requirements of thin-walled plate. It has the chemical properties of corrosion resistance, weather resistance, cold resistance, moisture resistance, salt spray, water resistance and oil resistance. Strong adhesion, wear-resisting, hardness, toughness, light, fullness, good color, dry and fast physical properties.

Product use:

Thin-wall steel structure anticorrosion coating is dedicated to baffle plate, galvanized sheet, tile, aluminum alloy plate width, thin wall, such as black, non-ferrous metal plates corrosion decoration, can also be applied to other structure parts of anticorrosive decoration.

Instructions:

Coating method: spray painting is good, can be painted, not to roll

Coating intervals: 23 + 2 ℃, minimum 2 hours, the longest 48 hours

Technical indicators:

Appearance: iron red, light color, light; All colors of paint and light

Thinner: special diluent

Shelf life: 23 + 2 ℃ : 4 ~ 6 hours

Maturation period: 23 + 2 ℃, 15 ~ 20 minutes

Drying time: 23 + 2 ℃ : table 2 hours, 24 hours a day, completely curing 7 days

Packing specifications:

Iron bucket a group of 18.5L 20L 16kg; Part b: 4L 4KG

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.