Bituminous horseshoe grease 70%

Product composition:

Bituminous horseshoe grease is used for bituminous horseshoe grease, lined with asphalt chestnut (also known as cold bituminous cement), mahohos mixed with surface paint, horse-shoe and silver powder face paint, etc. Choose moisture-proof, waterproof, insulation, good flame retardant rubber powder, hoof fat, natural asphalt, the right amount of additives, asbestos wool, phenolic resin and so on, is a novel, cheap, excellent anticorrosion, heat insulation, heat preservation material, suitable for thermal insulation engineering in corrosion protection.

Product features:

Bituminous horseshoe grease film is full, strong and strong adhesion; Atmospheric corrosion and bacterial erosion; Good temperature resistance, water resistance and moisture resistance; Adiabatic, not easy to burn, heat preservation, electric insulation good; It is not broken when the vibration and temperature change.

Product use:

Bituminous horse shoe grease is suitable for piping insulation, insulation and cloth coating; The product is suitable for oil, gas, steam, pipelines, valves, city heating, steam supply and other equipment of the storage tank and pipe insulation, heat preservation, moistureproof protect, prevent freezing process of evaporation, fluid, saving energy, improving refractory, insulation, moistureproof, protection equipment service life, etc.

Instructions:

Asphalt tamar hoof fat for a high build high viscosity material, black is configured by the factory factory, open cans can use, fully mixing before use, can also be field configuration, appropriate USES wipe blade coating, coating, build by laying bricks or stones and batch of embedded, such as using roller coating, add right amount special diluent dilution.

Coating intervals: 23 + 2 ℃, the shortest 6 hours, the longest 7 days

Technical indicators:

Appearance: black, light

Density: about 1.4

Theory of usage: 1200 g / ㎡

Diluent: a special diluent for horseshoe

Drying time: 23 + 2 ℃ for 24 hours

Film thickness: 1000 mu m

Packing specifications:

Iron drum 20 l 20 kg

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.