Waterborne epoxy anticorrosive paint

Product composition:

Water-based epoxy anticorrosive coating is a two-component coating of waterborne epoxy resin, corrosion resistance, wear-resisting facial filler, auxiliary agent, water-based amine curing agent and negative ion.

Product features:

Lacquer film has ceramic tile luster surface, the lacquer film that form is hard, wear-resisting, colour and lustre is plump; Corrosion resistance of chemicals such as water resistance, oil resistance, acid and alkali salt.

Product use:

Waterborne epoxy anticorrosion coating is suitable for industrial and ship coated black metal or non-ferrous metal surface for anticorrosion primer.

Instructions:

Coating method: spraying, brushing, roller coating

Coating number: the proposal is coated with a base of two surfaces, two or three coats of paint, with a dry film thickness of up to 150 mu m.

Coating intervals: 23 + 2 ℃, the shortest 6 hours, the longest 7 days

Technical indicators:

Appearance: primer: red, light, half light. Topcoat: colorful, light.

Thinner: anionic water (or clean running water)

Shelf life: 23 + 2 ℃ : 4 ~ 6 hours

Match: base, surface paint a: b =24:6

Maturation period: 23 + 2 ℃ : 125 minutes

Drying time: 23 + 2 ℃, table 4 hours or less, work 36 hours or less

Dry film thickness: 50 mu m

Packing specifications:

Iron drum. Part a: 18.5L 24KG;

Part b: 18.5L 17KG

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid long - term inhalation of solvent vapor or paint fog, skin, eyes must not contact this product, in the narrow place or the air is not in general construction, must provide strong ventilation, should wear good protective equipment during construction.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change without prior notice.