Top Quality Meropenem API Powder CAS 96036-03-2
HALAL ISO FDA 4 Inquiries
96036-03-2
Medcine
0%
ZB
Foil Bag
2022-12-31
Herb Extracts,Cosmetic raw materails,API
-
Product Description
-
Seller Information
-
Inquiry History
-
Description

Meropenem is another semisynthetic carbapenem antibiotic administered parenterally after imipenem cistatin was marketed in the United States. It inhibits the synthesis of bacterial cell walls by covalently binding to the penicillin binding protein (PBPs) involved in cell wall synthesis, thus playing an antibacterial role. It is sensitive to both gram-positive and gram-negative bacteria, especially gram-negative bacteria. For example, the minimum inhibitory concentration (MIC) for about 90% of enterobacterium was 0.08-0.15mg/L, and more than 90% of pseudomonas aeruginosa strains were highly sensitive to them (MIC < 4mg/L), and all haemophilus including ampicillin resistant strains were highly sensitive to them (MIC 0.06-1mg/L). Neisseria gonorrhoeae was also highly sensitive to meropenem and its activity was 15 times stronger than imipenem. Staphylococcus epidermidis, staphylococcus saprophytococcus and other coagulase negative staphylococcus are sensitive to meropenem, and most strains of enterococcus faecalis are highly or moderately sensitive to meropenem. Meropenem at a concentration of 0.06 -- 4mg/L inhibited almost all bacteroides fragilis. Anaerobic bacteria such as streptococcus digestion, propionibacterium, actinomyces and so on are also sensitive to meropenem.
Function1. Respiratory infection, such as chronic bronchitis, nosocomial pneumonia, pulmonary abscess, empyema, etc.
2. Intra-abdominal infection, such as cholecystitis, cholangitis, liver abscess, peritonitis, etc.
3. Urinary and reproductive system infections, such as pyelonephritis, complicated cystitis, endometritis, endometritis, endometritis, intrauterine infection, pelvic inflammation, connective tissue inflammation, etc.
4. Bone, joint, skin and soft tissue infection, such as cellulitis, anal abscess, osteomyelitis, arthritis, traumatic wound infection, burn wound infection, surgical incision infection, and peri-maxillary and peri-maxillary cellulitis.
Eye, ear, nose and throat infections.
6. Empirical treatment: for adults with granulocytopenia accompanied by fever, this product can be used alone or in combination with antivirals or antifungal drugs.
7. Use alone or in combination with other antimicrobial agents for the treatment of complex bacterial infections.
8. Other severe infections, such as meningitis, sepsis, etc.
CertificatesBasic Info-
Product Name:
Meropenem
Other Name:1-Azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid,3-[[(3S,5S)-5-[(dimethylamino)carbonyl]-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-,(4R,5S,6S)-;1-Azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid,3-[[5-[(dimethylamino)carbonyl]-3-pyrrolidinyl]thio]-6-(1-hydroxyethyl)-4-methyl-7-oxo-,[4R-[3(3S*,5S*),4α,5β,6β(R*)]]-;(4R,5S,6S)-3-[[(3S,5S)-5-[(Dimethylamino)carbonyl]-3-pyrrolidinyl]thio]-6-[(1R)-1-hydroxyethyl]-4-methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid;Meropenem;ICI 194660;SM 7338;Antibiotic SM 7338;Meropen;Meronem;Merrem IV;Merrem;Mepem;Monan;Meroxan
CAS No.:96036-03-2
Molecular Formula:C17H25N3O5S
InChIKeys:InChIKey=DMJNNHOOLUXYBV-PQTSNVLCSA-N
Molecular Weight:383.46
Exact Mass:383.46
EC Number:1806241-263-5
UNII:YOP6PX0BAO
DSSTox ID:DTXSID7045526
NCI Thesaurus Code:C61833
ATC Code:J01DH02|J - Antiinfectives for systemic use
HScode:29419000
Categories:
Characteristics-
PSA:
136
XLogP3:-2.4
Appearance:Solid
Density:1.4±0.1 g/cm3
Boiling Point:627.4°C at 760 mmHg
Flash Point:333.2±31.5 °C
Refractive Index:1.639
Water Solubility:Sparingly soluble with water.
Vapor Density:6.85X10-18 mm Hg at 25 deg C (est)
Henrys Law Constant:Henry's Law constant = 3.43X10-23 atm-cu m/mol at 25 °C (est)
Collision Cross Section:192.42 Ų [M-H]-
Experimental Properties:White to pale yellow crystalline powder. Sparingly soluble in water; very slightly soluble in hydrated ethanol /Meropenem trihydrate/|The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution ... and practically insoluble in acetone or ether. /Meropenem trihydrate/|Hydroxyl radical reaction rate constant = 1.81X10-10 cu cm/molec-sec at 25 °C (est)
Hazard IdentificationClassification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Warning
Hazard statement(s) H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Herb Extracts,Cosmetic raw materails,API
-
Location:
1403,Jinye B Block
-
Payment Terms:
TT against copy of documents
-
Average lead Time:
8
-
Total Annual Revenue:
$2.5 million-$5 million
-
Total Employees:
11-50
-
Year of Establishment:
2015
-
-
Inquiry History4 Inquiries
Country Product Purchase Quantity Date Posted
India
Meropenem
500 KG Mar 7, 2024
Bangladesh
Meropenem with Sodium Carbonate (Sterile) USP
300 KG Nov 21, 2024
Bangladesh
Meropenemm Sodium Carbonate Sterial Inj grade USP
300 KG Jan 2, 2024
Bangladesh
Meropenem With Sodium Carboante USP (Sterile Micro)
300 KG Nov 28, 2023 Post an enquiry for this product