Acetyl bromide 99% high purity certified Professional Producer Greenbo
506-96-7
Pharmaceutical Grade
99%
Shanghai
Greenbo
200kg Drum
2022-07-31
Active Pharm Ingredients,Chemical Catalyst,Pharmaceutical Intermediates,Flavors and Fragrances,Agrochemicals,Chemical Pesticides
-
Product Description
-
Seller Information
-
DescriptionCertificatesBasic Info
-
Product Name:
Acetyl bromide
Other Name:Acetyl bromide;Acetic acid bromide
CAS No.:506-96-7
Molecular Formula:C2H3BrO
InChIKeys:InChIKey=FXXACINHVKSMDR-UHFFFAOYSA-N
Molecular Weight:122.95
Exact Mass:122.95
BRN:1697546
EC Number:208-061-7
UNII:O18V5XYO0G
ICSC Number:0365
UN Number:1716
DSSTox ID:DTXSID5060140
Color/Form:Fuming liquid|Colorless fuming liquid
HScode:29159080
Categories:
Characteristics-
PSA:
17.1
XLogP3:0.62
Appearance:Clear colorless to dark yellow Fuming Liquid
Density:1.52 g/cm3 @ Temp: 9 °C
Melting Point:-96 °C
Boiling Point:76 °C
Flash Point:>230 °F
Refractive Index:1.444
Water Solubility:Solubility in water: reaction.Miscible with ether, chloroform, benzene and acetone.
Storage Conditions:Store at<= 20°C.
Vapor Pressure:92.2 mm Hg ( 25 °C)
Vapor Density:4.3 (vs air)
Toxicity:Peritoneal-mouse LD50: 250 mg/kg
Flammability characteristics:Flammable; heat decomposes toxic hydrogen bromide gas and highly toxic carbonyl bromide; releases hydrobromic acid in case of water and ethanol
Explosive limit:Vapor may explode if ignited in an enclosed area.
Odor:Sharp unpleasant odor
Experimental Properties:BP: 81 °C; MP: -96 °C|Specific gravity: 1.663 at 16 °C/4 °C|Violently decomposed by water, or by alcohol|Turns yellow in air|Ratio of specific heats of vapor (gas): 1.144 (est)|Ideal gas heat capacity: 0.129 Btu/lb-F (at 75 °F)|For more Other Experimental Properties (Complete) data for Acetyl bromide (10 total), please visit the HSDB record page.
Air and Water Reactions:Fumes in air. Reacts violently with water producing heat and acidic fumes [Haz. Chem. Data. 1966]. Acetyl bromide reacts vigorously with water to generate gaseous HBr. Based on a scenario where the chemical is spilled into an excess of water (at least 5 fold excess of water), half of the maximum theoretical yield of Hydrogen Bromide gas will be created in 0.08 minutes. Experimental details are in the following: "Development of the Table of Initial Isolation and Protective Distances for the 2008 Emergency Response Guidebook", ANL/DIS-09-2, D.F. Brown, H.M. Hartmann, W.A. Freeman, and W.D. Haney, Argonne National Laboratory, Argonne, Illinois, June 2009.
Reactive Group:Acyl Halides, Sulfonyl Halides, and Chloroformates
Reactivity Alerts:Water-Reactive
Reactivity Profile:ACETYL BROMIDE decomposes violently upon contact with water, steam, methanol or ethanol to form hydrogen bromide gas and acetic acid. Reacts vigorously with bases, both organic and inorganic. Incompatible with oxidizing agents and alcohols. Produces highly toxic fumes of bromine and carbonyl bromide when heated to decomposition [Sax, 9th ed., 1996, p. 34]. Vapor forms an explosive mixture with air [Kirk-Othmer, 3rd ed., Vol. 1, 1978, p. 162]. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].
Physical Dangers:The vapour is heavier than air.
Corrosivity:Corrosive|Corrosive to metals and tissue
Heat of Vaporization:106 btu/Lb = 59 cal/g = 2.5X10X5 J/kg
Critical Temperature & Pressure:1.6625 g/cu cm at 16 °C
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Skin corrosion, Sub-category 1B
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 3
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Danger
Hazard statement(s) H226 Flammable liquid and vapour
H314 Causes severe skin burns and eye damage
H412 Harmful to aquatic life with long lasting effects
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P273 Avoid release to the environment.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames. NO contact with water. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from food and feedstuffs. See Chemical Dangers. Dry. Well closed. Ventilation along the floor.Storage temperature: ambient.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Active Pharm Ingredients,Chemical Catalyst,Pharmaceutical Intermediates,Flavors and Fragrances,Agrochemicals,Chemical Pesticides
-
Location:
Zone K,Zwei Tianyuan Dushi Est,New Industial Park,High-tech Zone, Xian City,Shaanxi
-
Payment Terms:
TT against copy of documents,L/C,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
15
-
Total Annual Revenue:
$2.5 million-$5 million
-
Total Employees:
11-50
-
Year of Establishment:
2017
-
Certifications:
international trade license,FSSC2000
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
Hot Related Products
-
Best price 98% DL-Carnitine Cardiogen peptide raw powder CAS 406-76-8 -
API Veterinary Raw Material CAS 91832-40-5 Cefdinir Powder -
supply API Raw Material CAS 91832-40-5 Cefdinir Powder for sale -
Cefdinir 99% white powder LK-YRM -
4-Bromobutyl acetate -
Cardiogen 20mg 15+yeras API, Raw, Peptide factory supplier

















