Isobutyl acrylate 99% liquid Dideu
106-63-8
Industrial Grade
99%
Ang port in China
Dideu
180kg
2023-01-01
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Product Description
-
Seller Information
-
DescriptionBasic Info
-
Product Name:
Isobutyl acrylate
Other Name:2-Propenoic acid,2-methylpropyl ester;Acrylic acid,isobutyl ester;Isobutyl acrylate;Isobutyl 2-propenoate;NSC 20949;Light Acrylate AIB;IBA;2-Methylpropyl prop-2-enoate;1401517-00-7;2056117-89-4
CAS No.:106-63-8
Molecular Formula:C7H12O2
InChIKeys:InChIKey=CFVWNXQPGQOHRJ-UHFFFAOYSA-N
Molecular Weight:128.17
Exact Mass:128.17
BRN:1749388
EC Number:203-417-8
UNII:U02509V73F
NSC Number:20949
UN Number:2527
DSSTox ID:DTXSID1021873
Color/Form:Clear liquid
HScode:2916129000
Categories:
Characteristics-
PSA:
26.3
XLogP3:2.22
Appearance:Isobutyl acrylate appears as a clear colorless liquid with an acrid odor. Flash point 86°F. Less dense than water. Vapors irritate eyes and respiratory system. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a container, the container may rupture violently.
Density:0.8498 g/cm3 @ Temp: 22 °C
Melting Point:-61 °C
Boiling Point:132 °C
Flash Point:91 °F
Refractive Index:n20/D 1.414(lit.)
Water Solubility:In water, 2,000 mg/L at 25 deg C
Storage Conditions:The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. The acrylic esters may be stored in mild or stainless steel, or aluminum. /Acrylic acid & derivatives/
Vapor Pressure:7.07 mm Hg at 25 deg C
Vapor Density:4.42 (Air = 1)
Toxicity:Oral-rat LD50: 5967 mg/kg; Oral-Mouse LD50: 6106 mg/kg
Flammability characteristics:Flammable; polymerizes a lot of heat
Odor:Sharply odorous
Henrys Law Constant:Henry's Law constant = 5.96X10-4 atm-cu m/mole at 25 °C (est)
Experimental Properties:Liquid water interfacial tension: 35 dynes/cm= 0.035 N/m at 27 °C (est); ratio of specific heats of vapor: 1.044; heat of polymerization: -229 BTU/lb= -127 cal/g= -5.32X10+5 J/kg|Heat of evaporation: 297 J/g; specific heat: 1.92 J/g-K; React readily with electrophilic, free-radical, and nucleophilic agents /Acrylic acid & esters/|Heat capacity = 251.0 J/mol K|Hydroxyl radical reaction rate constant = 1.38X10-11 cu cm/molecule-sec at 25 °C (est)
Air and Water Reactions:Highly flammable. Slightly soluble in water
Reactive Group:Acrylates and Acrylic Acids
Reactivity Alerts:Highly Flammable
Reactivity Profile:ISOBUTYL ACRYLATE is an acrylate ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Polymerizes readily in the presence of heat and light generating much heat; reacts with strong oxidants. REF [Handling Chemicals Safely, 1980. p. 235].
Autoignition Temperature:644 °F (USCG, 1999)|800 °F (427 °C)
Heat of Combustion:-13,500 BTU/lb= -7500 cal/g= -314X10+5 J/kg
Flammable Limits:Lower 1.9%, upper 8.0% (in air) (% by vol)
Heat of Vaporization:38.1 kJ/mol at boiling point
Critical Temperature & Pressure:Critical temp: 599 °F= 315 °C= 588 K; critical pressure: 440 psia= 30 atm= 3.0 MN/sq m
Hazard IdentificationClassification of the substance or mixture
Flammable liquids, Category 3
Acute toxicity - Category 4, Dermal
Skin irritation, Category 2
Skin sensitization, Category 1
Acute toxicity - Category 4, Inhalation
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Warning
Hazard statement(s) H226 Flammable liquid and vapour
H312 Harmful in contact with skin
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H332 Harmful if inhaled
Precautionary statement(s) Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P271 Use only outdoors or in a well-ventilated area.
Response P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P317 Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P332+P317 If skin irritation occurs: Get medical help.
P333+P317 If skin irritation or rash occurs: Get medical help.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Storage P403+P235 Store in a well-ventilated place. Keep cool.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Prior to working with this chemical you should be trained on its proper handling and storage. Before entering a confined space where hexanol may be present, check to make sure that an explosive concentration does not exist. Store in an explosion-proof cool area. Protect for air and light for long-term storage. Where possible, automatically pump liquid from drums or other storage containers to process containers.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Location:
https://www.dideu.com/en/
-
Payment Terms:
TT against copy of documents,D/P,L/C,D/A,O/A,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
7
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
Above 1000
-
Year of Establishment:
2016
-
Certifications:
ISO Certificate,REACH
-
-
Country Product Purchase Quantity Date Posted Post an enquiry for this product
