Camphor oil 99.9%
1 Inquiries
8008-51-3
99.9%
25
2023-05-12
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionECHEMI Editorial ReferenceCamphor is a colorless glassy solid. Penetrating, characteristic odor. White camphor oil is the first distillation fraction (about 20% of thecrude camphor oil). It is a colorless or almost colorless liquid with acineole-like odor.d
25
25
0.855–0.875; n
20
D
1.4670–1.4720; α
D
+16° to +28°; solubility: 1 volin 1 vol of 95% ethanol; solutions usually become cloudy on further dilution. In addition to monoterpene hydrocarbons, this oil contains up to 35%1,8-c
Camphor oil appears as a colorless liquid with a characteristic odor. Flash point 125°F. Insoluble in water and generally less dense than water. Vapors heavier than air.|D-camphor appears as colorless or white crystals. Sublimes. Flash point 149°F. Burns readily with a bright, smoky flame. Penetrating aromatic odor. Pungent, aromatic taste followed by a sensation of cold. (NTP, 1992)|L-camphor appears as colorless or white crystals. Fragrant and penetrating odor. Slightly bitter and cooling taste. Odor index at 68° F: 40. Flash point 149°F. Burns with a bright, smoky flame. Sublimes appreciably at room temperature and pressure; 14% sublimes within 60 minutes at 176°F and 12 mm Hg. (NTP, 1992)|White to gray translucent crystals or fused mass; Warm, minty, almost ethereal diffusive aroma
Camphor oil appears as a colorless liquid with a characteristic odor. Flash point 125°F. Insoluble in water and generally less dense than water. Vapors heavier than air.|D-camphor appears as colorless or white crystals. Sublimes. Flash point 149°F. Burns readily with a bright, smoky flame. Penetrating aromatic odor. Pungent, aromatic taste followed by a sensation of cold. (NTP, 1992)|L-camphor appears as colorless or white crystals. Fragrant and penetrating odor. Slightly bitter and cooling taste. Odor index at 68° F: 40. Flash point 149°F. Burns with a bright, smoky flame. Sublimes appreciably at room temperature and pressure; 14% sublimes within 60 minutes at 176°F and 12 mm Hg. (NTP, 1992)|(R)-camphor is the (R)- enantiomer of camphor. It is an enantiomer of a (S)-camphor.|A bicyclic monoterpene ketone found widely in plants, especially cinnamomum camphora. It is used topically as a skin antipruritic and as an anti-infective agent.Basic Info-
Product Name:
Oils, camphor
Other Name:Oils,camphor;Camphor oil;Formosa camphor oil;Japanese camphor oil;Light camphor oil;Light oil of camphor;White camphor oil;Oil of Camphor
CAS No.:8008-51-3
InChIKeys:DSSYKIVIOFKYAU-XCBNKYQSSA-N
Molecular Weight:152.23 g/mol
Exact Mass:152.120115130 g/mol
EC Number:207-354-7|207-355-2|244-350-4|923-389-7
UNII:N20HL7Q941
NSC Number:755918
UN Number:1130|2717
DSSTox ID:DTXSID8022036|DTXSID4024721|DTXSID4093697
ATC Code:C - Cardiovascular system
HScode:33012910
Categories:
Characteristics-
PSA:
17.1 Ų
XLogP3:2.380
Density:0.923 at 77 °F (USCG, 1999)|0.992 at 77 °F (NTP, 1992)
Melting Point:353.8 °F (NTP, 1992)|353.5 °F (NTP, 1992)|179.26666666669996 °C|176.00to177.00°C.@760.00mmHg
Boiling Point:171°C(lit)
Flash Point:110°F
Refractive Index:n20/D 1.468(lit.)
Water Solubility:less than 1 mg/mL at 59° F (NTP, 1992)|1 g/800 mL at 77° F (NTP, 1992)|1600 mg/L @ 25 °C (exp)|Soluble in oils, water|Soluble (in ethanol)
Storage Conditions:2-8°C
Vapor Pressure:1 mm Hg at 106.7 °F ; 5 mm Hg at 155.5° F (NTP, 1992)|1 mm Hg at 106.7 °F (NTP, 1992)|0.22 mmHg
Vapor Density:5.24 (NTP, 1992) (Relative to Air)
Air and Water Reactions:Flammable. Insoluble in water.|Flammable. Slightly water soluble.
Reactive Group:Ethers|Ketones
Reactivity Alerts:Highly Flammable
Reactivity Profile:CAMPHOR OIL containing ether can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.|D-CAMPHOR is incompatible with strong oxidizing agents, strong reducing agents and chlorinated solvents. (NTP, 1992)|L-CAMPHOR may be sensitive to heat and direct sunlight. Incompatible with strong oxidizing agents, strong reducing agents and chlorinated solvents. Also incompatible with potassium permanganate. Salts of any kind should not be added to it in water. Reacts violently with chromic anhydride (NTP, 1992).
Autoignition Temperature:870.8 °F (USCG, 1999)|871 °F (NTP, 1992)
Hazard IdentificationClassification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity â single exposure, Category 3
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Warning
Hazard statement(s) H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s) Prevention P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
Storage P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
-
-
Seller Information
-
Business Type:
Manufactory
-
Main Products:
Chemical Pesticides,Food Additives,Agrochemicals,Active Pharm Ingredients,Flavors and Fragrances,Chemical Catalyst
-
Location:
https://www.dideu.com/en/
-
Payment Terms:
TT against copy of documents,D/P,L/C,D/A,O/A,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
7 days
-
Total Annual Revenue:
Above $100 million
-
Total Employees:
Above 1000
-
Year of Establishment:
2016
Company Certificates-
ISO Certificate
-
REACH
">Company Profile -
-
Inquiry History1 Inquiries
Country Product Purchase Quantity Date Posted
India
camphor oil
100 KG Sep 17, 2024 Post an enquiry for this product
More from this Seller
-
-
-
549-02-0,DHED,Shaanxi Dideu,gold product.Manufacturer, Discount
Industrial Grade / 99%
-
-
-
-
High Quality Shaanxi Dideu Medichem Co.Ltd O-304
Pharmaceutical Grade / 98%
-
-
-
-
Odanacatib (MK-0822) SHAANXI DIDEU HOT SELL HIGH QUALITY
Pharmaceutical Grade / 99%
-
-
-
-
Silver citrate,99%
Food Grade / 99%
-
-
-
-
High Quality Erdafitinib 99% powder 1346242-81-6-Shaanxi Dideu Medichem Co.Ltd
Chemical Grade / 99%
$1/G FOB
-
Hot Related Products
-
Mineral oil All type TOP Quality -
Cosmetic Grade Mineral Oil CAS High Quality White Oil CAS 8042-47-5 Liquid Paraffin$800-1000/MT FOB
-
99.99% Pure high quality Naphthalene 99% transparent liquid CAS No.: 91-20-3 -
Mineral oil -
D-Limonene, CAS No:138-86-3 -
High Purity Best Price CAS 8042-47-5 White Mineral Oil -
SYNTHETIC MENTHOL -
D-Limonene 138-86-3 -
Industrial Grade White Mineral Oil CAS 8042-47-5 for Plastic & Rubber Processing -
White Mineral oil 8042-47-5