Sasolwax S682 Equal China Microcrystalline Wax 70#

The melting point range of SASOLWAX S682 is between 62 and 66℃, with a needle penetration of 44 (1/10mm) and a kinematic viscosity of 10 (mm²/ s) . This model is very similar to China's microcrystalline wax 70#, with a drop melting point of 70.2℃, a penetration rate of 21.4 (1/10mm), and a kinematic viscosity of approximately 7 (mm²/s). Because microcrystalline wax in China belongs to hard wax, the penetration may be slightly lower. If you are looking for a similar product to this SASOLWAX S682 micro wax, you can contact us. For example, you can use 70 # microwax in jar candles to improve candle performance.

Microcrystalline wax is a waxy substance that is solid at room temperature and has a high melting point. It is made up of long-chain hydrocarbons and is derived from crude oil or natural gas. Microwax is often used in various industrial and cosmetic applications, such as in the production of candles, cosmetics, and polishes.

Microwax is different from other types of wax because of its unique properties, such as its high melting point, low viscosity, and good hardness. These properties make it useful in applications where a wax with a high melting point and good hardness is required.

In addition to its industrial and cosmetic uses, microcrystalline wax is also used in the food industry as a coating for fruits and vegetables to extend their shelf life. It is also used in the pharmaceutical industry as a binder and coating agent for tablets and capsules.

Certificate Of Analysis

Product Name: Microcrystalline Wax NO.70

Executive Standard: SH/T 0013-2008

Batch Number: 20230615

What are the common types of microcrystalline wax produced by Germany's Sasol?

Sasolwax 682, Sasolwax 3971, Sasolwax 2528, Sasolwax 1365.

Which is better, Sasol or Chinese microcrystalline wax?

The main focus is on the application scenarios of the product, there is no best, only the most appropriate. Because the properties of microcrystalline waxes are similar.