China supplier high purity Sodium oxide cas 1313-59-3 white powder
TDS 9 Inquiries
1313-59-3
Pharmaceutical Grade
99.5%
qingdao
SCH
as require
Yes
2026-08-08
Acrylonitrile,Sodium biselenite methylamine solution,Methylamine [anhydrous],Zinc dust,Hydrogen peroxide solution [content >8%],Triisopropyl borate
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionECHEMI Editorial Referencewhite to grey granules or powder
Sodium is a strong alkaline flux of low toxicity that creates brightly colored glazes. Its exact melting point is 1652°F (900°C) but it begins melting at about 1580°F (860°C), so it's best to begin to reduce high-sodium glazes at this point.Sodium oxide is a powerful flux at all temperatures. You'll often see it written as KNaO because it's similar to potassium oxide (K2O) in color response and expansion and contraction rate. Often the insoluble source of sodium oxide includes some potassium oxide; for example, feldspars, which are the primary source of sodium in high-fire glazes, usually contain varying amounts of both sodium and potassium oxides.Most sodium oxide sources are soluble and can act as deflocculants in a glaze slurry or a casting slip. Glazes such as copper red or carbon trap shinos,which have soluble sources of sodium oxide like soda ash, borax, ornepheline syenite, can easily become deflocculated.One interesting characteristic of sodium oxide is that it's volatile above 2012°E (1100°C)and will cause flashing on a clay body as it leaves the glaze. For this rcason it's widely used in such vapor glazing techniques as soda and salt firing.Sodium exhibits a low viscosity and low surface tension so if it's used in high enough quantities it will cause glazes to run. It also has a high expansion and contraction rate and will often cause crazing in glazes.Sodium oxidc creatcs soft glaze surfaces that are easily abraded by cutlery, acids,and bases (detergents).Insoluble sources of sodium oxide include sodium feldspars,Minspar, Kona F-4, NC-4, Bainbridge, Eureka, Godfrey, and cryolite. It's also present in potash feldspars, including Custer, G-200, K-200, Plastic Vitrox, Cornwall stone,volanic ash, and rottenstone.Soluble forms of sodium oxide include soda ash, baking soda, salt, borax, unwashed wood as, Gerstley borate and its substitutes, and sodium silicate. Nepheline syenite and most frits are slightly soluble.
A white solid formed by burning sodium in a deficiency of oxygen or alternatively by reducing sodium peroxide or sodium hydroxide with the requisite amount of sodium. It reacts violently with water to form sodium hydroxide and with acids to form solutions of their salts. Sodium monoxide forms cubic crystals. It dissolves in liquid ammonia to give a mixture of sodamide and sodium hydroxide.
sodium monoxide: A whitish-greydeliquescent solid, Na2O; r.d. 2.27;sublimes at 1275°C. It is manufacturedby oxidation of the metal in alimited supply of oxygen and purifiedby sublimation. Reaction with waterproduces sodium hydroxide. Its commercialapplications are similar tothose of sodium hydroxide.
Sodium oxide is a strong alkaline oxide, commonly used as an active flux in ceramic glazes.Certificates-
TDS
Basic Info-
Product Name:
Sodium oxide
Other Name:SODIUM OXIDE;SODIUM MONOXIDE;Na2O;Sodium oxide (Na2O);sodiumoxide(na2o);disodium oxide;Sodium oxide pwoder;Natriumoxid
CAS No.:1313-59-3
Molecular Formula:Na2O
InChIKeys:KKCBUQHMOMHUOY-UHFFFAOYSA-N
Molecular Weight:61.98
EC Number:215-208-9
TSCA:TSCA listed
Color/Form:White to gray
Categories:
Characteristics-
Density:
2.27 g/mL at 25 °C (lit.)
Melting Point:>400°C
Boiling Point:sublimes at 1274℃ [HAW93]
Water Solubility:Soluble in water.
Vapor Pressure:0Pa at 20℃
Flammability characteristics:Not classified
Hazard IdentificationClassification of the substance or mixture
Skin corrosion, Sub-category 1B
GHS label elements, including precautionary statements
Pictogram(s)
Signal word Danger
Hazard statement(s) H314 Causes severe skin burns and eye damage
Precautionary statement(s) Prevention P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from strong acids and food and feedstuffs. Dry.
-
-
Seller Information
-
Business Type:
Trader
-
Main Products:
Acrylonitrile,Sodium biselenite methylamine solution,Methylamine [anhydrous],Zinc dust,Hydrogen peroxide solution [content >8%],Triisopropyl borate
-
Location:
Shop No.15, 1st Floor, Building 12, Hengda Huafu, Sucheng District, Suqian City
-
Payment Terms:
TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
30 days
-
Total Annual Revenue:
Less than $1 million
-
Total Employees:
5-10
-
Year of Establishment:
2022
-
-
Inquiry History9 Inquiries
Country Product Purchase Quantity Date Posted
United States
SODIUM OXIDE
25 KG Apr 26, 2025
India
Sodium oxide LR
25.00 KG Oct 8, 2024
India
Sodium oxide
25.00 KG Sep 23, 2024
Germany
Sodium oxide
1 KG Feb 10, 2025
India
Sodium oxide
25.00 KG Sep 18, 2024
India
Sodium Oxide
100 KG Sep 24, 2026
Egypt
Sodium
3 40' Fcl Aug 3, 2026
United States
Sodium Oxide
7 KG Aug 8, 2025
India
sodium oxide
10 KG Oct 8, 2024 Post an enquiry for this product
More from this Seller
-
-
-
purity 99.5% Toluene-2,4-diisocyanate various packings available GC
Industrial Grade / 99.5%
$1/MT FOB
-
-
-
-
Triisobutyl phosphate 126-71-6 C12H27O4P
organic chemistry / 98%
-
-
-
-
China Factory Soda Ash Sodium Carbonate CAS 497-19-8 in large stock
Industrial Grade / 99.5%
-
-
-
-
Factory Supplies High Purity 48% Brh CAS 10035-10-6 Liquid Hydrobromic Acid with fast delivery
Pharmaceutical Grade / 98.5%
-
-
-
-
Natural gas (rich in methane) cas no 8006-14-2
Industrial Grade / 99%
$1/MT FOB
-
-
-
-
Factory supplier Yellow liquid Phosphorus trichloride CAS Number:7719-12-2 with high purity
Pharmaceutical Grade / 99.5%
-
Hot Related Products
-
Sodium percarbonate 15630-89-4 -
141-53-7 -
HCOONa Formic Acid Sodium Salt White powder Industry Grade Sodium Formate 98% Ruisunny -
Factory Supply Industry Grade Sodium Formate 99% with Lowest Price 141-53-7 -
sodium percarbonate569 -
Low price Sodium Percarbonate -
Sodium Percarbonate -
Industrial, Detergent & Food Grade Sodium Percarbonate (SPC) CAS 15630-89-4 Oxygen Bleaching Agent, Disinfectant & Detergent Additive -
Hot Sale CAS 527-07-1 Sodium Gluconate 98% Chemical Powder for Water Treatment Chemical Materials$600-650/MT FOB
-
China Granule Manufacturer 15630-89-4 Powder 90% Min Price Sodium Percarbonate$560-728/MT FOB
PVC Resin the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic,insoluble in water and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property.Polyvinyl chloride is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydro chloric acid, 90% sulfuric acid, 60% ni tric acid and 20% so dium hydro xide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80°C, it starts to decompose and change color at 130°C, and precipitate HCI.

