FR-RDT 3

  Product Detail  

Product Name：Decabromodiphenylethane

RDT-3

Chemical Name: Benzene, 1,1′-(1,2-ethanediyl) bis [2,3,4,5,6-pentabromo-

Synonyms: 1,2-Bis (2,3,4,5,6-pentabromophenyl) ethane;

Molecular Formula ：

CAS No.： 84852-53-9

1. Physical and Chemical Properties

Appearance: White powder

Properties: non - toxic, odorless, non - corrosive, and insoluble in water, ethanol, acetone, benzene, chlorinated

aromatics, etc.

Density:2.816±0.06 g/cm3(Predicted)

Melting Point: 345°C.

Boiling Point: 346.606°C

Solubility:Dioxane (very slight, heated)

1. Quality Indicators

3. Hazardous Overview

Potential Acute Health Effects:

Eye Contact: May cause eye irritation.

Skin Contact: Slightly hazardous, may cause skin irritation.

Inhalation: May be irritating to the respiratory tract.

Ingestion: Harmful.

Potential Chronic Health Effects:

Skin Contact: May be sensitizing.

Repeated or prolonged exposure may cause damage to the kidneys, peripheral nervous system, central nervous

system (CNS), and thyroid.

2 / 3

The substance may be mutagenic to mammalian somatic cells.

4. First Aid Measures

Eye Contact: Immediately check for and remove any contact lenses. Flush eyes with plenty of water for at least

15 minutes. Cold water can be used. Seek medical attention after flushing.

Skin Contact: Wash the contact area with soap and water. If irritation occurs, apply an emollient and seek

medical advice.

Inhalation: Move the inhaler to a place with fresh air. If breathing stops, perform artificial respiration; if

breathing is difficult, give oxygen and seek medical attention in time.

Ingestion: Do not induce vomiting unless directed by medical personnel. Never give anything by mouth to an

unconscious person. If a large amount is swallowed, call a doctor immediately and loosen tight clothing such as

collars, ties, belts, or waistbands.

5. Fire - Fighting Measures

Flammability of the Product: Non - flammable.

Auto - Ignition Temperature: Not applicable.

Flash Points: Not applicable.

Flammable Limits: Not applicable.

Combustion Products: No clear relevant data.

Fire - Fighting Media and Methods: The product is non - flammable. In case of fire, use fire - fighting media

suitable for the surrounding environment, such as dry powder, carbon dioxide, and water mist.

6. Emergency Response to Leakage

Small Spill: Use appropriate tools to collect the spilled solid into a convenient waste disposal container. If

necessary, neutralize the residue with a dilute solution.

Large Spill: Construct dikes or dig pits to contain the leaked material. Avoid the leakage from entering sewers,

surface water, and groundwater. Use suitable adsorbent materials (such as sand, activated carbon, etc.) to absorb

the leaked material and transfer it to a safe place for disposal.

7. Handling and Storage

Handling Precautions:

Operators should be specially trained and strictly follow the operating procedures.

Operations should be carried out in a well - ventilated area.

Avoid contact of eyes and skin with the product, and avoid inhaling dust.

Keep away from fire sources and heat sources. Smoking is strictly prohibited in the workplace.

Use explosion - proof ventilation systems and equipment.

Avoid contact with prohibited substances such as strong oxidants, strong acids, and strong alkalis.

Handle with care during transportation to prevent damage to packaging and containers.

Storage Precautions:

Store in a cool and ventilated warehouse.

Keep the container sealed to avoid moisture.

Store separately from oxidants, acids, alkalis, etc. Do not store them together.

Keep away from fire sources and heat sources.

[Packaging]: Packed in 25Kg woven bags.

8. Transportation Information

UN Dangerous Goods Number: Not a dangerous good.

UN Transport Name: No special regulations.

Packing Category: Packing for non - dangerous goods. During transportation, ensure that the packaging is intact

to prevent product leakage and moisture. 9.Application:

3 / 3

End of the Technical Data Sheet

This product is a broad - spectrum, high - efficiency, additive - type flame retardant. It has excellent thermal

stability, a relatively high bromine content, as well as advantages such as strong anti - ultraviolet ability and

low toxicity. It is widely used in engineering thermoplastics, wire and cable coatings, elastomers, and

thermosetting plastics, etc.

Production Scale: 10,000 tons/year

EAST CHEMSOURCES LIMITED

NO.666 HAIBIN 12TH ROAD, HUANGDAO, QINGDAO, CHINA

Tel ：+86 18954221560

export@eastchem-cn.com

1. Founded in 2008, East Chemsources Limited is a professional manufacturer and supplier in food and chemical field in China. Through more than ten years development, our company has developed from single product at first to provide solution to final products now, which is committed to providing solutions for success and growth with long-term relationships.

   At present, our products have been exported to more than 60 countries all over the world. Our service is accomplished by providing a good quality solution that matches the specifications of our clients at competitive price. Our products would derive from trusted sources and arrive to our clients  in well arranged manner, be creating the greatest benefits for our customers.

   Whether your project is large or small, whether it needs one, several or all of our products, you will find our same consistent level of quality requirement. We are looking forward to your sincere cooperation and participation.

   Hope having a good cooperation with you.
   

   Name: Arabella
   

   Email: export@eastchem-cn.com