Wholesale NPDGA neopentyl glycol diacrylate - Cas 2223-82-7
1 Inquiries
2223-82-7
Industrial Grade
90%
Poti
GUM GUAR
Bulk packaging
2026-03-15
Ethanol,Retatrutide,SLES,Tirzepatide,GHK-CU,Semaglutide
-
Product Description
-
Seller Information
-
Inquiry History
-
DescriptionBasic Info
-
Product Name:
Neopentyl glycol diacrylate
Other Name:2-Propenoic acid,1,1′-(2,2-dimethyl-1,3-propanediyl) ester;Acrylic acid,2,2-dimethyltrimethylene ester;2-Propenoic acid,2,2-dimethyl-1,3-propanediyl ester;1,3-Propanediol,2,2-dimethyl-,diacrylate;2,2-Dimethyltrimethylene acrylate;Sartomer SR 247;Dimethylolpropane diacrylate;2,2-Dimethylpropane-1,3-diol diacrylate;Neopentyl glycol diacrylate;Neopentanediol diacrylate;NK Ester A-NPG;Kayarad NPGDA;Viscoat 247;NPGDA;Viscoat 215;2,2-Dimethylpropanediol diacrylate;Light Acrylate ND-A;Light Acrylate NP-A;Sartomer 247;NSC 97407;A-NPG;NP-A;Etermer EM 225;EM 225;SR 247;(2,2-Dimethyl-3-prop-2-enoyloxypropyl) prop-2-enoate;2,2-Dimethylpropane-1,3-diyl diacrylate;95576-40-2;127194-97-2
CAS No.:2223-82-7
Molecular Formula:C11H16O4
InChIKeys:InChIKey=MXFQRSUWYYSPOC-UHFFFAOYSA-N
Molecular Weight:212.242
Exact Mass:212.24
EC Number:218-741-5
UNII:0OHU17DNNU
ICSC Number:1286
NSC Number:97407
DSSTox ID:DTXSID0051869
Color/Form:Colorless liquid
HScode:2916190090
Categories:
Characteristics-
PSA:
52.60000
XLogP3:1.86
Appearance:Liquid
Density:1.0 g/cm3
Melting Point:6 °C
Boiling Point:96 °C @ Press: 0.98 Torr
Flash Point:123.6±18.2 °C
Refractive Index:1.452
Water Solubility:Solubility in water: poor
Storage Conditions:The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. ... The acrylic esters may be stored in mild or stainless steel, or aluminum. /Acrylic acid & derivatives/
Vapor Pressure:0.03 mm Hg at 20 deg C
Vapor Density:Relative vapour density (air = 1): 7.3
Henrys Law Constant:Henry's Law constant = 3.6X10-7 atm-cu m/mol at 25 °C (est)
Experimental Properties:BP at 0.13 kPa: 96 °C|React readily with electrophilic, free-radical, and nucleophilic agent /Acrylic acid & esters/|Vapors are uninhibited and may polymerize; the liquid substance may polymerize|Hydroxyl radical reaction rate constant = 2.24X10-11 cu cm/molecule-sec at 25 °C (est)
Physical Dangers:Vapours are uninhibited and may polymerize in vents or flame arresters, causing blockage.
Hazard IdentificationClassification of the substance or mixture
Acute toxicity - Category 3, Dermal
Skin irritation, Category 2
Eye irritation, Category 2
Skin sensitization, Category 1
GHS label elements, including precautionary statements
Pictogram(s) 
Signal word Danger
Hazard statement(s) H311 Toxic in contact with skin
H315 Causes skin irritation
H319 Causes serious eye irritation
H317 May cause an allergic skin reaction
Precautionary statement(s) Prevention P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P264 Wash ... thoroughly after handling.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
Response P302+P352 IF ON SKIN: Wash with plenty of water/...
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P361+P364 Take off immediately all contaminated clothing and wash it before reuse.
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P317 If skin irritation or rash occurs: Get medical help.
Storage P405 Store locked up.
Disposal P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
Handling and StoragePrecautions for safe handling
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Cool. Store only if stabilized.The effectiveness of phenolic inhibitors is dependent on the presence of oxygen and the monomers must be stored under air rather than an inert atmosphere. Temp must be kept low to minimize formation of peroxides and other products. ... The acrylic esters may be stored in mild or stainless steel, or aluminum. Acrylic acid & derivatives
-
-
Seller Information
-
Business Type:
Distributor
-
Main Products:
Ethanol,Retatrutide,SLES,Tirzepatide,GHK-CU,Semaglutide
-
Location:
Georgia, Tbilisi, Samgori district, police lane I, N5, floor 2, apartment N 4a
-
Payment Terms:
TT against copy of documents,D/P,TT against B/L draft before shipment,100% TT in advance
-
Average lead Time:
10
-
Total Annual Revenue:
$1 million-$2.5 million
-
Total Employees:
11-50
-
Year of Establishment:
2017
-
-
Inquiry History1 Inquiries
Country Product Purchase Quantity Date Posted 
United States
DPDGA Dipropylene Glycol Diacrylate
8000 KG Oct 25, 2023 Post an enquiry for this product
