Lab Grade MOTS-C Mitochondrial Derived Peptide For Scientific Study

• 1. Pre-operation Preparation

  
  
  This product is a dedicated laboratory research reagent, operated only by professional researchers in a standard sterile laboratory.
  
  
  Clean the work bench in advance to keep it clean, dry and well ventilated, and remove sundries and residual reagents to avoid cross-contamination. Prepare sterile liquid handling tools, sealed containers, experimental solvents and protective equipment. All utensils shall be cleaned, sterilized and cooled before use.
  
  
  Wear lab coat, protective gloves and goggles to prevent direct contact of powder and solution with skin, eyes and respiratory tract. Inspect the package before use to ensure intact sealing and normal material status.
  
  

  2. Dissolution

  
  
  Select suitable solvents such as purified water, dilute acid, methanol or ethanol according to experimental protocols. Add solvent slowly along the inner wall of the container, then stir or swirl gently until the powder is fully dissolved into a clear and homogeneous solution. Filter with membrane for high-precision experiments if needed.
  
  

  3. Dilution and Experimental Application

  
  
  To prepare working solutions of different concentrations, perform serial dilution with blank solvent and mix gently after each step to ensure uniform concentration.
  
  
  Draw required volume of solution and transfer it into reaction vessels, cell culture systems and other experimental carriers. Conduct experiments in accordance with specified temperature, duration, pH value and other parameters, and keep complete records for traceability.
  
  

  4. Post-operation Handling

  
  
  Tighten and fully seal the original vial immediately after use, then store it under specified conditions. Clean, sterilize and store all used utensils in accordance with standard laboratory procedures.
  
  
  Collect waste liquid, residual materials and used consumables separately. Dispose of them uniformly following laboratory hazardous waste regulations. Random dumping is prohibited.
  
  

  5. Additional Notes

  
  
  1. Prepare solutions immediately before use to prevent substance degradation.
  2. The product is hygroscopic and light-sensitive. Use it up promptly after opening and avoid repeated opening.
  3. Handle the product gently during operation and transportation to prevent package damage and material leakage.
  4. This product is only for in vitro scientific research. Do not alter its intended use, and it shall not be applied to non-research scenarios related to humans and animals.

• 1. 1. General Storage Requirements

     
     
     This peptide crystalline powder is hygroscopic and sensitive to temperature and light. Store it in a cool, dry, dark and well-ventilated dedicated reagent area. Keep away from heat sources, strong light and electrical equipment. Store separately from corrosive and volatile chemicals to avoid cross-contamination and deterioration.
     
     

     2. Storage for Unopened Products

     
     
     Short-term storage: Keep fully sealed products in refrigerator at 2℃~8℃.

     
     

     Long-term storage: Seal the vial tightly and store at -20℃ away from light. For ultra-long preservation, storage at -80℃ is recommended.

     
     

     Place products away from ground moisture. Do not stack heavy items on top to prevent package damage. Follow the first-in, first-out rule. The shelf life of unopened products is 24 months under standard storage conditions.
     
     

     3. Storage for Opened Products

     
     
     Fully tighten and seal the cap immediately after sampling to isolate air and moisture, and reduce the risk of moisture absorption and degradation.

     
     

     Store opened products at 2℃~8℃ in dry and dark conditions. Avoid repeated opening and moving, and use the product as soon as possible.
     
     

     4. Storage for Prepared Solution

     
     
     Liquid solution is much less stable than solid powder. Use it immediately after preparation.

     
     

     For temporary storage, transfer the solution into a clean sealed container and keep it at 2℃~8℃. Complete usage within 24 hours.

     
     

     Do not store at room temperature for a long time or perform repeated freeze-thaw cycles, which will cause substance degradation and property changes. Dispose of turbid or precipitated solution in accordance with laboratory hazardous waste regulations.
     
     

     5. Management of Subpackaged Samples

     
     
     Use airtight containers for divided samples. Place them together with desiccant in a light-proof box before refrigeration. Mark product name, subpackaging date and batch number clearly for management and traceability.
     
     

     6. Daily Maintenance & Notes

     
     
     Check the operation of refrigeration and freezing equipment regularly, as well as package and material status. Isolate damaged, damp, caked or discolored products in a timely manner.

     
     

     Turn on dehumidifiers in humid weather for better moisture protection. Handle products gently during transportation to prevent sealing failure caused by collision.

Core Business & Product Portfolio

• Therapeutic peptides: SS-31 (Elamipretide), Tirzepatide, Semaglutide, Retatrutide (RT20), etc.
• Functional peptides: GHK-Cu, TB500, KPV, NAD, Glutathione, etc.
• Custom peptide services: Custom synthesis of complex sequences, long-chain peptides (up to 200 amino acids) and cyclic peptides, as well as various modification services (N-methylation, unusual amino acid incorporation, etc.).

R&D & Manufacturing Strength

• Technical expertise: Mastery of core technologies including solid-phase peptide synthesis (SPPS), liquid-phase synthesis, advanced purification (HPLC) and strict structural characterization.
• Quality assurance: All products are produced in compliance with cGMP standards, with complete CoA, HPLC and MS reports to ensure batch-to-batch consistency and high purity (≥98%).
• Production capacity: Equipped with professional production bases in Guangzhou, supporting small-batch R&D samples to large-scale commercial production, with stable supply capacity.

Global Market & Service Philosophy

Vision