Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 6-METHYL-2,2'-BIPYRIDINE

6-METHYL-2,2'-BIPYRIDINE

6-METHYL-2,2'-BIPYRIDINE structure

6-METHYL-2,2'-BIPYRIDINE 

structure
  • CAS No:

    56100-22-2

  • Formula:

    C11H10N2

  • Chemical Name:

    6-METHYL-2,2'-BIPYRIDINE

  • Synonyms:

    6-METHYL-2,2'-BIPYRIDINE;6-METHYL-2,2'-DIPYRIDYL;6-methyl-2-(2-pyridyl)pyridine;2,2'-Bipyridine, 6-Methyl-;6-Methyl-2,2'-dipyridyl 97%;2-methyl-6-(pyridin-2-yl)pyridine

  • Categories:

    Pharmaceutical Intermediates  >  Heterocyclic Compound

6-METHYL-2,2'-BIPYRIDINE Basic Attributes

170.21

170.08400

DTXSID00348656

2933399090

Characteristics

25.8

2.1

1.09 g/mL at 25 °C(lit.)

117-119 °C0.1 mm Hg(lit.)

>230 °F

n20/D 1.607(lit.)

Safety Information

NONH for all modes of transport

3

36/37/38

26-36

Xi

P261-P305 + P351 + P338

H315-H319-H335

|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 39 companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

6-METHYL-2,2'-BIPYRIDINE Use and Manufacturing

Methyllithium (1.3 M, 33.80 mmol) in THF (26 mL) was added dropwise to a solution of 2, 2'-bipyridine (5.30 g, 34.00 mmol) in diethyl ether (100 mL) at 0 °C under N5.30 g of 2, 2'-bipyridine was placed in a three-necked flask, Nitrogen and reduced to below 0 & lt; 0 & gt; C with an ice bath, Then take 100 ml of dry ether to the flask to 2, 2 '- bipyridine all dissolved;Another 26 ml of methyl lithium (1.3 moles per liter) was added dropwise to the flask, The reaction was carried out under ice-cooling for 2 hours and then refluxed for 3 hours.After cooling to room temperature, The reaction was quenched by the addition of 10 ml of water, After separation, The aqueous phase was extracted with ether, The solvent was evaporated, 300 ml of a saturated potassium permanganate solution in acetone was added, Stirring for one hour, The produced manganese dioxide was removed by filtration, The solvent was distilled off, The pure product II, 3.278 g, was isolated by distillation under reduced pressure at a yield of 63.8percent.2, 2’-Bipyridyl(180 mg, 1.0 mmol) was added into a 100-mL 2-neck round-bottom flask with amagnetic stirring bar. The flask was evacuated and refilled with N2 gas following theusual Schlenk technique. Dry toluene (30 mL, 0.30 M) was added while stirring andthe reaction mixture was cooled to 0 °C. Methyl lithium in ether solution (3.1 M, 0.32mL, 1.0 mmol, 1.0 equiv) was added dropwise in the course of 30 min, and stirred foran additional 30 min at 0 C. The reaction mixture was quenched with dropwiseaddition of H2O (10 mL). The resulting mixture was extracted with CH2Cl2 (3 10mL) and the combined organic layer was treated with excess MnO2, followed bystirring for 30 min. The crude product was filtered through a pad of Celite® andconcentrated in vacuo. Purification through silica gel column chromatography(hexane/EtOAc = 3:2) and removal of solvent in vacuo gave 6-Mebpy in 36percent (61 mg, 0.31 mmol) yield as an oil.General procedure: To an undivided electrochemical cell, fitted by a zinc rod as the anode and surrounded by a nickel foam as the cathode, were added DMF (50 mL), 0.1 M NaI, and 1, 2-dibromoethane (2.5 mmol, 215 μL). The mixture was electrolyzed under argon at a constant current intensity of 0.2 A at room temperature for 20 min. Then the current was stopped, and [Ni(bpy)]BrGeneral procedure: To an undivided electrochemical cell, fitted by a zinc rod as the anode and surrounded by a nickel foam as the cathode, were added DMF (50 mL), 0.1 M NaI, and 1, 2-dibromoethane (2.5 mmol, 215 μL). The mixture was electrolyzed under argon at a constant current intensity of 0.2 A at room temperature for 20 min. Then the current was stopped, and [Ni(bpy)]BrGeneral procedure: The controlled current preparative electrolysis were carried out with a potentiostat/galvanostat equipment. Undivided cells with 20 mL compartment were used. Zn or Fe metallic rod with 8 mm diameter was used as the sacrificial anode. Ni foam (6 cm.x.3.5 cm) was used as the cathode. It could be re-used after washing with a 6 M HCl solution following by water and acetone, and dried. The same solution was used to clean the anode. A 5 mL DMF solution containing 7percent or 20percent of NiBrGeneral procedure: To an undivided electrochemical cell, fitted by a zinc rod as the anode and surrounded by a nickel foam as the cathode, were added DMF (50 mL), 0.1 M NaI, and 1, 2-dibromoethane (2.5 mmol, 215 μL). The mixture was electrolyzed under argon at a constant current intensity of 0.2 A at room temperature for 20 min. Then the current was stopped, and [Ni(bpy)]BrA colourless solution of 6-Mebpy (43 mg, 0.25 mmol) and BIPHEP (131 mg, 0.25 mmol) in CH2Cl2(20 mL) was added to a colourless solution of [Cu(MeCN)4][PF6] (93 mg, 0.25 mmol) in CH2Cl2 (20 mL), turning the solution yellow. After stirring at room temperature for 2 h, the solvent was removed underreduced pressure. The crude product was redissolved in CH2Cl2 and layered with Et2O, to precipitate[Cu(BIPHEP)(6-Mebpy)][PF6] (202 mg, 0.23 mmol, 92%) as a yellow powder. 1H-NMR (500 MHz, acetone-d6, 298 K): /ppm 8.72 (dt, J = 8.3, 1.0 Hz, 1H, HA3), 8.62 (d, J = 7.9 Hz, 1H, HB3), 8.29-8.21(overlapping m, 2H, HB4+A4), 8.04 (dt, J = 5.2, 0.8 Hz, 1H, HA6), 7.73 (dd, J = 7.8, 0.9 Hz, 1H, HB5), 7.54 (m, 1H, HA5), 7.46-7.10 (overlapping m, 26H, HD2+D2?+D3+D3?+D4+D4?+C4+C4?+C5+C5?+C6+C6?), 6.99(m, 1H, HC3/C3?), 6.88 (m, 1H, HC3/C3?), 2.58 (s, 3H, HMe). 13C{1H} NMR (126 MHz, acetone-d6, 298 K):/ppm 160.5 (CB6), 153.5 (CA2/B2), 152.7 (CA2/B2), 151.0 (CA6), 145.7 (br, CC1+C1?), 140.6 (CA4/B4), 140.2(CA4/B4), 136.2 (br, CC6/C6?), 135.2 (br, overlapping, CD2/D2?), 134.2 (CD2/D2?), 134.1 (CD2/D2?), 129.45(CD3/D3?), 129.4 (CD3/D3?), 128.8 (br, CC4+C4?), 127.6 (CB5), 127.0 (CA5), 123.9 (CA3), 121.4 (CB3); signalsfor CC3, CC5, CC1, CC2, CD1 were poorly resolved. 31P{1H} NMR (202 MHz, acetone-d6, 298 K): /ppm1.3 (broad, FWHM = 428 Hz, BIPHEP) 3.7 (broad, FWHM = 401 Hz, BIPHEP), 144.2 (septet, JPF = 700 Hz, [PF6]). ESI MS: m/z 755.16 [M-PF6]+ (base peak, calc. 755.18). Found C 61.89, H 4.83, N 3.38; C47H38CuF6N2P3H2O requires C 61.41, H 4.39, N 3.05.

Computed Properties

Molecular Weight:170.21
XLogP3:2.1
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:170.084398327
Monoisotopic Mass:170.084398327
Topological Polar Surface Area:25.8
Heavy Atom Count:13
Complexity:158
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 6-METHYL-2,2'-BIPYRIDINE

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.