Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Bis(4-methoxyphenyl)amine

Bis(4-methoxyphenyl)amine

Bis(4-methoxyphenyl)amine structure

Bis(4-methoxyphenyl)amine 

structure
  • CAS No:

    101-70-2

  • Formula:

    C14H15NO2

  • Chemical Name:

    Bis(4-methoxyphenyl)amine

  • Synonyms:

    Benzenamine,4-methoxy-N-(4-methoxyphenyl)-;Diphenylamine,4,4′-dimethoxy-;4-Methoxy-N-(4-methoxyphenyl)benzenamine;p,p′-Dimethoxydiphenylamine;4,4′-Dimethoxydiphenylamine;Di(p-methoxyphenyl)amine;N-(p-Methoxyphenyl)-p-anisidine;Bis(p-methoxyphenyl)amine;Di-p-anisylamine;Bis(p-anisyl)amine;Difenam;Bis(4-methoxyphenyl)amine;Thermoflex;Fenam M;N,N-Bis(4-methoxyphenyl)amine;N-(4-Methoxyphenyl)-p-anisidine;Di(4-methoxyphenyl)amine

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

Description

silver-grey crystalline solidFine very light gray to silver-gray crystalline solid.


4,4'-dimethoxydiphenylamine is a fine very light gray to silver-gray crystalline solid. (NTP, 1992)


4,4'-dimethoxydiphenylamine is a fine very light gray to silver-gray crystalline solid. (NTP, 1992)

Bis(4-methoxyphenyl)amine Basic Attributes

229.279

229.27

202-968-1

I912MLM9XT

DTXSID3025093

29222990

Characteristics

30.5

3.6

4,4'-dimethoxydiphenylamine is a fine very light gray to silver-gray crystalline solid. (NTP, 1992)

1.0955 (rough estimate)

103 °C

250-255 °C @ Press: 15 Torr

150.5±13.2 °C

1.5300 (estimate)

less than 1 mg/mL at 66° F (NTP, 1992)

This chemical may be sensitive to prolonged exposure to air. Slowly oxidized. Insoluble in water.

Amines, Phosphines, and Pyridines

4,4'-DIMETHOXYDIPHENYLAMINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Safety Information

NONH for all modes of transport

3

R68

22-36/37/39-36/37-26-53

DU9085000

Xn

Stability Combustible. Incompatible with strong oxidizing agents.

P261-P281-P305 + P351 + P338

H315-H319-H335-H351

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P201, P202, P261, P264, P271, P280, P281, P302+P352, P304+P340, P305+P351+P338, P308+P313, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 44 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: This compound can produce extremely irritating fumes when exposed to air or fire. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Bis(4-methoxyphenyl)amine Use and Manufacturing

Uses

4,4'-Dimethoxydiphenylamine is a diphenylamine derivative used as a chemical additive for cured rubber. 4,4'-Dimethoxydiphenylamine is highly toxic and may potentially induce chromosome abberation.

Benzenamine, 4-methoxy-N-(4-methoxyphenyl)-: ACTIVE

Computed Properties

Molecular Weight:229.27
XLogP3:3.6
Hydrogen Bond Donor Count:1
Hydrogen Bond Acceptor Count:3
Rotatable Bond Count:4
Exact Mass:229.110278721
Monoisotopic Mass:229.110278721
Topological Polar Surface Area:30.5
Heavy Atom Count:17
Complexity:184
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Bis(4-methoxyphenyl)amine

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.