Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 6-BROMO-1-METHYL-1H-INDAZOLE

6-BROMO-1-METHYL-1H-INDAZOLE

6-BROMO-1-METHYL-1H-INDAZOLE structure

6-BROMO-1-METHYL-1H-INDAZOLE 

structure
  • CAS No:

    590417-94-0

  • Formula:

    C8H7BrN2

  • Chemical Name:

    6-BROMO-1-METHYL-1H-INDAZOLE

  • Synonyms:

    6-BROMO-1-METHYL-1H-INDAZOLE;1-Methyl-6-bromoindazole;6-Bromo-1-methylindazole;1H-Indazole, 6-broMo-1-Methyl-;6-bromo-1-methyl-3a,7a-dihydro-1H-indazole

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

6-BROMO-1-METHYL-1H-INDAZOLE Basic Attributes

211.06

209.979248

1592732-453-0

DTXSID40626440

2933990090

Characteristics

17.8

2.8

1.6±0.1 g/cm3

293.6°C at 760 mmHg

131.4±19.8 °C

1.663

Safety Information

22

Xn

P264, P270, P301+P312, P330, P501

H302

|Warning|H302 (95.12%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P301+P312, P330, and P501|Aggregated GHS information provided by 41 companies from 4 notifications to the ECHA C&L Inventory.

6-BROMO-1-METHYL-1H-INDAZOLE Use and Manufacturing

Part A: To 6-bromoindazole (402A) (5.0 g, 25.4 mmol) in THF (50 mL) was added sodium hydride (95percent, 672 mg, 26.6 mmol) with ice bath cooling. The mixture was stirred for 30 minutes. Methyl iodide (6.36 mL, 102 mmol) was added at room temperature. The reaction mixture was quenched with ammonium chloride solution and the layers were separated. The aqueous layer was extracted with ethyl acetate. The combined organic layer was washed with brine, dried over sodium sulfate and concentrated. Purification by column chromatography (SiOExample 2005 Compound 2005A (400 mg, 2.03 mmol) was dissolved in 10 ml of THF and reacted with sodium methoxide (4 mL, 2.03 mmol). After 30 min iodomethane (0.5 mL, 8.12 mmol) was added. Reaction mixture was stirred for 3 hours at room temp, then it was added to ethyl acetate and water. The aqueous layer was extracted with ethyl acetate twice. All the organic layers were combined, washed with brine solution and dried over sodium sulfate. The solvent was removed by rotary evaporator and further purified by S1O[0411] 6-Bromoindazole (400 mg) was dissolved in methanol (10 mL). To this solution, potassium hydroxide (450 mg)was added followed by methyl iodide (0.50 mL) and the mixture was refluxed for 2.5 h. The reaction was cooled, dilutedwith diethyl ether, washed with water, brine, dried and concentrated. The product 6-bromo-1-methylindazole (160 mg)was separated from its isomer by Combiflash(2) 1700.0 g (8.05 mol, 1.00 equ.) of 6-bromo-1-methylcarbazole was added to the autoclave.11000.0 ml of methanol and 1630.0 g of triethylamine (16.10 mol, 2.00 equ.), [1, 1'-bis(diphenylphosphino)ferrocene]palladium dichloride dichloromethane complex 85.0 g, After the addition, the carbon monoxide was replaced by a pressure of 5.0 MPa, and the temperature was raised to 110 C for 20 hours.After the reaction of the raw materials is completed, the reaction solution is cooled to room temperature, filtered, and the filter cake is rinsed with a small amount of methanol.The filtrate was concentrated to 3000.0 mL, then 21500.0 mL of methyl tert-butyl ether was added.Stir at room temperature for 4 hours, filter, rinse the filter cake with a small amount of methyl tert-butyl ether.The filtrate was washed with 2 mol/L hydrochloric acid aqueous solution and 7% sodium hydrogencarbonate aqueous saturated saline solution, and the organic phase was concentrated, then crystallized with n-heptane, filtered, and dried.There was obtained 1500.0 g of 6-bromo-1-methylcarbazole in a yield: 98%.A solution of 6-bromo- 1 -methyl- 1 //-indazole (500 mg, 2.37 mmol, 1.00 eq.), tert- butyl piperazine- 1 -carboxylate (443 mg, 2.38 mmol, 1.00 eq.), NaOtBu (343 mg, 1.50 eq.), DavePhos (9 mg, 0.01 eq.), and Pd2(dba)3 (22 mg, 0.02 mmol, 0.01 eq.) in toluene (10 mL) was stirred for 16 h in a 30-mL sealed tube under N2 at 90 C in an oil bath. The resulting solution was extracted with 2x30 mL EtOAc, and the organic layers were combined and concentrated in vacuo. The residue was purified by silica gel column chromatography using EtOAc / hexane (1/1), to afford 600 mg (80 %) of the title compound as white solid. LC-MS: (ES, m/z): 317To a mixed solution of compound 4a (10.5g, 50mmol), bisboronic acid pinacol (19g, 75mmol) and KOAc (7.5g, 75mmol) in 1, 4-dioxane (150ml) was added Pd(dppf)2Cl2 (1g), and flushed with nitrogen. The reaction flask was sealedand the reaction was stirred overnight at 85°C. After cooling to room temperature, an aqueous Na2CO3 solution (2.5M, 30ml), Pd(dppf)2Cl2 (1g) and 2, 5-dibromo-3-nitropyridine (21g, 75mmol) were added. After flushed with nitrogen for 10minutes, the reaction flask was sealed and the mixture was stirred overnight at 85°C. The reaction was poured into waterand extracted with ethyl acetate. The organic phase mixture was dried over Na2SO4, dried by suction and purified bysilica gel column chromatography (PE:EA=10:1 to 1:1) to provide compound 4b as a yellow solid.HNMR(CDCl3), 8.9(s, 1H), 8.3(s, 1H), 8.0(s, 1H), 7.8(m, 1H), 7.7(m, 1H), 7.2(m, 1H), 4.1(s, 3H).MS( ESI)m/z:332.8(M+H)+.

Computed Properties

Molecular Weight:211.06
XLogP3:2.8
Hydrogen Bond Acceptor Count:1
Exact Mass:209.97926
Monoisotopic Mass:209.97926
Topological Polar Surface Area:17.8
Heavy Atom Count:11
Complexity:151
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of 6-BROMO-1-METHYL-1H-INDAZOLE

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.