C,C,C-Trimethyl-1,6-hexanediamine
-
C,C,C-Trimethyl-1,6-hexanediamine
structure -
-
CAS No:
25620-58-0
-
Formula:
C9H22N2
-
Chemical Name:
C,C,C-Trimethyl-1,6-hexanediamine
-
Synonyms:
1,6-Hexanediamine,C,C,C-trimethyl-;C,C,C-Trimethyl-1,6-hexanediamine;1,6-Hexanediamine,trimethyl-;Trimethyl-1,6-hexanediamine;C,C,C-Trimethyl-1,6-hexanediamine;Epicure 940;52438-14-9
-
CAS No:
Description
Trimethylhexamethylenediamines appears as a colorless to light yellow liquid. Insoluble in water and less dense than water. Contact may severely irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.
Trimethylhexamethylenediamines appears as a colorless to light yellow liquid. Insoluble in water and less dense than water. Contact may severely irritate skin, eyes and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.
Characteristics
104.08000
5.49380
0.867 g/mL at 25ºC(lit.)
37.5°C (estimate)
232 °C(lit.)
220 °F
n20/D 1.464(lit.)
0.251mmHg at 25°C
Insoluble in water.
Amines, Phosphines, and Pyridines
Amines, such as TRIMETHYLHEXAMETHYLENEDIAMINE, are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Safety Information
III
8
UN 2327 8/PG 3
2
22-34-43-52/53
26-36/37/39-45
C,N
P273-P280-P305 + P351 + P338-P310
H302-H314-H317-H412
Special Hazards of Combustion Products: May contian toxic and irritating gases including NOx. Behavior in Fire: May generate toxic and irritating gases. (USCG, 1999)
|Danger|H302 (96.63%): Harmful if swallowed [Warning Acute toxicity, oral]|P260, P261, P264, P270, P272, P273, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P330, P333+P313, P363, P405, and P501|Aggregated GHS information provided by 1546 companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: SMALL FIRE: Dry chemical, CO2 or water spray. LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire-control water for later disposal; do not scatter the material. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2016)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2016)
Wear self-contained (positive pressure if available) breathing apparatus (with acid filter like that used for ammonia) and full protective clothing. (USCG, 1999)
Drug Information
INHALATION: Irritating to mucous membranes. EYES and SKIN: Irritation. INGESTION: May be harmful if swallowed. (USCG, 1999)|Corrosives
INHALATION: Remove victim to fresh air. Keep victim warm and quiet. If breathing has stopped, give artificial respiration. If breathing is difficult, administer oxygen. EYES or SKIN: Immediately flush with running water for at least 15 minutes. (Hold eyelids open if necessary.) Keep victim quiet and maintain normal body temperature. Remove and isolate contaminated clothing and shoes at site. INGESTION: If victim is unconscious or having convulsions, do nothing except maintain normal body temperature and seek medical aid. (USCG, 1999)
C,C,C-Trimethyl-1,6-hexanediamine Use and Manufacturing
1,6-Hexanediamine, C,C,C-trimethyl-: ACTIVE
Health Hazards -> Corrosives
Computed Properties
Molecular Weight:158.28
XLogP3:0.8
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:5
Exact Mass:158.178298710
Monoisotopic Mass:158.178298710
Topological Polar Surface Area:52
Heavy Atom Count:11
Complexity:99.7
Undefined Atom Stereocenter Count:1
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
- Hot Searches
- vanillin molar mass
- hcl sds
- ipa sds
- naclo compound
- lacunar stroke
- water sds
C,C,C-Trimethyl-1,6-hexanediamine
SDSRequest for Quotation