Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Benzyl methacrylate

Benzyl methacrylate

Benzyl methacrylate structure

Benzyl methacrylate 

structure
  • CAS No:

    2495-37-6

  • Formula:

    C11H12O2

  • Chemical Name:

    Benzyl methacrylate

  • Synonyms:

    2-Propenoic acid,2-methyl-,phenylmethyl ester;Methacrylic acid,benzyl ester;Benzyl methacrylate;Benzyl 2-methylacrylate;Light Ester BZ;Benzyl 2-methyl-2-propenoate;Acryester BZ;NSC 20970;BzMA;Phenylmethyl 2-methyl-2-propenoate;Fancryl FA-BZM;FZ-BZA;FA-BZM;Benzyl α-methylacrylate;Miramer M 1183;A 003M;2696-41-5

  • Categories:

    Cosmetic Ingredient  >  Film Forming

Description

colourless liquid

Benzyl methacrylate Basic Attributes

176.215

176.21

219-674-4

Z3248K2SSM

20970

DTXSID0022193

2916140000

Characteristics

26.3

2.9

colourless liquid

1.0399 g/cm3 @ Temp: 204 °C

<25 °C

95-98 °C

124.1±9.9 °C

1.512

Insoluble in water.

0.0262mmHg at 25°C

Safety Information

NONH for all modes of transport

1

R36/37/38

S26

Xi:Irritant;

Stable. Flammable. Incompatible with free-radical initiators, oxidizing agents, reducing agents. Avoid heat. Light-sensitive.

P305 + P351 + P338

H315-H319-H335

|Warning|H315 (95.35%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P272, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P333+P313, P337+P313, P362, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 215 companies from 15 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Drug Information

benzyl methacrylate

Benzyl methacrylate Use and Manufacturing

Methods of Manufacturing

General procedure: In Examples 62 to 64, as shown in Table 13, a transesterification reaction was carried out between methyl methacrylate which is an easily polymerizable ester compound and an alcohol compound. In Example 62, as in Example 24, lanthanum nitrate and tri n-octylphosphine were previously azeotropically refluxed with dimethyl carbonate for 1 hour, then dimethyl carbonate was evaporated at room temperature, The obtained catalyst was used. In Examples 63 and 64, methyltridodecylammonium methyl carbonate was used singly. As a result, ester products were obtained in high yield. It is to be noted that in Example 62, when using the isolated phosphonium salt as a catalyst instead of using the prepared catalyst as it is, it is predicted that the ester product is obtained with a higher yield than in Example 62 . Although not shown in Table 13, potassium tert-butoxide was used as a catalyst, and various by-products were produced.Adding phosphine ylide compound to a dry 25 mL reaction tube(benzyl 2-(tripheny l-λ5phosphanylidene)propanoate) 0.5 mmol, three times of carbon dioxide gas exchange was introduced to form a carbon dioxide gas atmosphere in the reaction tube, and the pressure was maintained at 1 atm.Then, a catalyst potassium butoxide (KaOtBu) 0.05 mmol was sequentially added to the reaction tube.2 mL of an organic solvent N, N-dimethylformamide (DMF) and a reducing agent polymethylhydrogensiloxane (PMHS) 3 mmol were reacted at 100 ° C for 12 hours.After the reaction, it was naturally cooled to room temperature.After removing the solvent under reduced pressure, the residue was purified by column chromatography to yield ethyl acetate / petroleum ether = 1/10 (v/v)The product yield in this example was 83percent.Phenylmethanol (1.0 g) and triethylamine (2.79 mL) were dissolved in dichloromethane and chilled to 0 °C. Methacryloyl chloride (2.12 mL) was then added drop wise to the mixture under nitrogen atmosphere. After mixing for overnight, the mixture was then washed with 100 mM pH 8.0 phosphate buffer and dried over anhydrous sodium sulfate. The solvent was subsequently removed using rotary evaporation under reduced pressure, and the product was isolated using silica gel chromatography at 50percent yield.To a solution of benzyl 3-(dimethylamino)-2-methylpropanoate 1b (50.0 mg, 0.226 mmol) in 2-PrOH (1.1 mL) were added CDMT (40.0 mg, 0.226 mmol, 1.0 eq.) and Et

Uses

Adhesives and sealant chemicals

Adhesive manufacturing|2-Propenoic acid, 2-methyl-, phenylmethyl ester: ACTIVE

Computed Properties

Molecular Weight:176.21
XLogP3:2.9
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:4
Exact Mass:176.083729621
Monoisotopic Mass:176.083729621
Topological Polar Surface Area:26.3
Heavy Atom Count:13
Complexity:190
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Benzyl methacrylate

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.