Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Isooctyl acetate

Isooctyl acetate

Isooctyl acetate structure

Isooctyl acetate 

structure
  • CAS No:

    31565-19-2

  • Formula:

    C10H20O2

  • Chemical Name:

    Isooctyl acetate

  • Synonyms:

    Acetic acid,isooctyl ester;Isooctanol,acetate;Isooctyl alcohol,acetate;Isooctyl acetate

  • Categories:

    Specialty Chemicals

Description

Isooctyl acetate appears as a clear colorless liquid with a sweet ester odor. Less dense than water. Vapors heavier than air. Eye contact may cause irritation. Frequent or prolonged skin contact may irritate and cause dermatitis. Vapors irritate the eyes and respiratory tract and may cause headaches and dizziness, are anesthetic and may have other central nervous system effects. Vapors may also cause liver and kidney disorder. Ingestion of the liquid into the respiratory system may cause bronchopneumonia or pulmonary edema.


Isooctyl acetate appears as a clear colorless liquid with a sweet ester odor. Less dense than water. Vapors heavier than air. Eye contact may cause irritation. Frequent or prolonged skin contact may irritate and cause dermatitis. Vapors irritate the eyes and respiratory tract and may cause headaches and dizziness, are anesthetic and may have other central nervous system effects. Vapors may also cause liver and kidney disorder. Ingestion of the liquid into the respiratory system may cause bronchopneumonia or pulmonary edema.|Isooctyl acetate is a carboxylic ester.

Isooctyl acetate Basic Attributes

172.27

172.146332

250-701-2

9Y25SYG8D5

1993

DTXSID5067635

2942000000

Characteristics

26.30000

3.71

clear colorless liquid

0.9±0.1 g/cm3

-65.75°C (estimate)

202.6°C (estimate)

71.4±8.3 °C

1.421

No rapid reaction with air. No rapid reaction with water.

Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters

ISOOCTYL ACETATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Safety Information

R36/37/38

S26-S36

Xi

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. Substance may be transported hot. For hybrid vehicles, ERG Guide 147 (lithium ion batteries) or ERG Guide 138 (sodium batteries) should also be consulted. If molten aluminum is involved, refer to ERG Guide 169. (ERG, 2016)

Not Classified

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective. SMALL FIRE: Dry chemical, CO2, water spray or regular foam. LARGE FIRE: Water spray, fog or regular foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet). FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material. LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. (ERG, 2016)

Drug Information

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. (ERG, 2016)

Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]: Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. Keep victim calm and warm. (ERG, 2016)

Isooctyl acetate Use and Manufacturing

Uses

Used as an auxiliary for high-grade paint, high-grade paint and leather brightener

Acetic acid, isooctyl ester: ACTIVE

Computed Properties

Molecular Weight:172.26
XLogP3:3.7
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:7
Exact Mass:172.146329876
Monoisotopic Mass:172.146329876
Topological Polar Surface Area:26.3
Heavy Atom Count:12
Complexity:119
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Price Analysis

Make your Isooctyl acetate purchase based on the price and market insights! ECHEMI provides professional market insights with prices for you to make a better choice. Learn more on Isooctyl acetate prices .
  • Data: 2026-08-11
  • Price: 15000.00Yuan/ton
  • Change: 0

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.