Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > 1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2)

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2)

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2) structure

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2) 

structure
  • CAS No:

    25148-68-9

  • Formula:

    C7H10N2.2ClH

  • Chemical Name:

    1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2)

  • Synonyms:

    1,2-Benzenediamine,N1-methyl-,hydrochloride (1:2);1,2-Benzenediamine,N-methyl-,dihydrochloride;o-Phenylenediamine,N-methyl-,dihydrochloride;N-Methyl-o-phenylenediamine dihydrochloride;N-Methyl-1,2-diaminobenzene dihydrochloride;N-Methyl-1,2-phenylenediamine dihydrochloride;1-Amino-2-methylaminobenzene dihydrochloride;N-Methyl-1,2-benzenediamine dihydrochloride;2-(Methylamino)aniline Dihydrochloride

  • Categories:

    Pharmaceutical Intermediates  >  Cardiovascular Agents

Description

Redish Powder


Crystals (from ethanol); light purple powder. (NTP, 1992)


Crystals (from ethanol); light purple powder. (NTP, 1992)

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2) Basic Attributes

195.09000

194.03800

246-655-8

NML5KQ540I

DTXSID5025651

2921519090

Characteristics

38.05000

Crystals (from ethanol); light purple powder. (NTP, 1992)

191ºC

252.4ºC at 760 mmHg

122.4ºC

H2O: >=10 g/100 mL at 23 ºC

Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from

0.0193mmHg at 25°C

Water soluble.

Salts, Acidic

N-METHYL-O-PHENYLENEDIAMINE DIHYDROCHLORIDE is an acidic salt. Materials in this group are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions.

Safety Information

3

R22; R36/37/38

S36; S26

UR8432000

Xn; Xi

P261, P264, P270, P271, P280, P301+P310, P302+P352, P304+P340, P305+P351+P338, P311, P312, P321, P322, P330, P332+P313, P337+P313, P361, P362, P363, P403+P233, P405, P501

H301

Flash point data for this chemical are not available; however, it is probably combustible. (NTP, 1992)

|Danger|H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]|P261, P264, P270, P271, P280, P301+P310, P302+P352, P304+P340, P305+P351+P338, P311, P312, P321, P322, P330, P332+P313, P337+P313, P361, P362, P363, P403+P233, P405, and P501|Aggregated GHS information provided by 2 companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2) Use and Manufacturing

Uses

Used as an intermediate for telmisartan

1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2): INACTIVE

Computed Properties

Molecular Weight:195.09
Hydrogen Bond Donor Count:4
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:1
Exact Mass:194.0377538
Monoisotopic Mass:194.0377538
Topological Polar Surface Area:38
Heavy Atom Count:11
Complexity:83
Covalently-Bonded Unit Count:3
Compound Is Canonicalized:Yes

Recommended Suppliers of 1,2-Benzenediamine, N1-methyl-, hydrochloride (1:2)

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.